|◀ ◀ 445 - 456 of 597 ▶ ▶|
View:

80% Standard NOX Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet

    • Item#:
    N80ESN1552420A
    Manufacturer Item:
    N80ESN1552420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN1552420A_Spec

    Up to 92% Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Singlestage gas valve and fixedspeeds, constant torque ECM
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOX emissions requirement.
  • Flame rollout sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosionresistant, prepainted steel cabinet
    • Item#:
    N92ESN0601714A
    Manufacturer Item:
    N92ESN0601714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92ESN-Care_Misc
    N92ESN_Install
    N92ESN_Spec

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN0601714A

    • Item#:
    N92MSN0601714A
    Manufacturer Item:
    N92MSN0601714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    95% Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 96% AFUE in upflow and horizontal positions up to 95% AFUE in downflow position
  • FixedSpeeds, Constant Torque ECM blower motor
  • Supports singlestage cooling units
  • Insulated heat exchanger compartment
  • Approved for Twinning application (0601714 through 1002120) with accessory (order separately)
  • Approved for Manufactured Housing/Mobile Home applications (0401410 through 1202422) with accessory (order separately)
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
    • Item#:
    N95ESN0801716A
    Manufacturer Item:
    N95ESN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N95ESN-Care_Misc
    N95ESN_Install
    N95ESN_Spec

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 14-3/16" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN0701412A

    • Item#:
    N80MSN0701412A
    Manufacturer Item:
    N80MSN0701412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    Oil Furnace Lo-Boy 107-129K BTU Output 85-86.8% AFUE 115 VAC 5 Ton Cooling Heavy Gauge Heat Exchanger, Low Profile, Easy Assess Control Panel


    Item#:
    OLR154F20
    Manufacturer Item:
    OLR154F20A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    OLR154F20_Spec

    96% Direct Vent 2-Pipe Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products N96MSN1002120A

    • Item#:
    N96MSN1002120A
    Manufacturer Item:
    N96MSN1002120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96MSN-Care_Misc
    N96MSN_Install

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement



    International Comfort Products N92MSN0802120A

    • Item#:
    N92MSN0802120A
    Manufacturer Item:
    N92MSN0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    96% Performance Series Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

    Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
  • Lifetime Heat Exchanger Limited Warranty upon timely registration+Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
    Lifetime Heat Exchanger Limited Warranty upon timely registration+
    • Item#:
    N96VSN0401410B
    Manufacturer Item:
    N96VSN0401410B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96MSN

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN1002120A

    • Item#:
    N92MSN1002120A
    Manufacturer Item:
    N92MSN1002120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    96% Direct Vent 2-Pipe Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products N96MSN0401712A

    • Item#:
    N96MSN0401712A
    Manufacturer Item:
    N96MSN0401712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96MSN-Care_Misc
    N96MSN_Install

    92.1% Direct Vent 2 Pipe Gas Heating Furnace 35" H x 24-1/2" W x 29-1/2" D

  • Certified to leak 2% or less of nominal air conditioning CFM delivered when pressurized to 1" WC with all present air inlets, air outlets and condensate drain ports sealed
  • Tougher - flame roll-out sensors standard, adjustable heating blower off delay, factory set blower on delay, RPJ primary heat exchanger, stainless steel secondary heat exchanger, high temperature limit control prevents overheating, direct ignition with silicon nitride igniter, high quality, corrosion-resistant, preprinted steel cabinet
  • Direct vent (2-pipe), single pipe venting or ventilated combustion air
  • 24 VAC humidifier terminal and electronic air cleaner terminal
  • Innovative knobs for easy door removal and secure attachment
  • Through the casing flue pipe for counterflow or horizontal applications with accessory
  • 4-position - upflow/downflow/horizontal installation
  • Self diagnostics with super bright LED
  • Slide out heat exchanger and blower assembly
  • 5 years parts and 20 years heat exchanger limited warranty
  • Base AFUE efficiency
  • 4.5 - 13.6" WC inlet gas pressure


    • Item#:
    N9MSB1202420
    Manufacturer Item:
    N9MSB1202420C
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N9MSB0401410-Service_Misc
    N9MSB1202420_Spec
    |◀ ◀ 445 - 456 of 597 ▶ ▶|
    View: