|◀ ◀ 25 - 36 of 659 ▶ ▶|
View:

Oil Furnace Lo-Boy 97-101K BTU Output 85-86.2% AFUE 120 VAC 6" Flue Direct Drive Rear Flue (BURNER NOT INCLUDED)

Williamsom-Thermoflo CLB-105-DD-R-x-W-S2 Powder Coat Paint Oil Furnace, 85.9% AFUE, 91000/105000/119000 BTU Input, 79400/90200/101200 BTU Output, 1325 cfm
    Less burner
  • Rear flue
  • Interior baffling for maximum efficiency
  • 3.5 Ton cooling capacity
  • Heavy gauge with seal-tite construction and foil-faced insulation for hand-cool surface
  • Spring loaded observation port with test port
  • 18-1/2" width x 17-1/2" depth supply air outlet
  • 18-1/2" width x 15-1/2" depth return air outlet
  • 6" flue diameter
  • Heavy gauge burner mounting plate with studs and nuts
  • Heavy-gauge with seal-tite construction
  • Preformed slide out chamber for easy service

    williamson -thermoflo clb105ddrxws2

Item#:
CLB105DDRXWS2
Manufacturer Item:
CLB105DDRXWS2
Manufacturer:
WILLIAMSON -THERMOFLO
 
ClB-Direct-Drive-Manual_Misc
CLB-Series_Spec
CLB-Variable-Drive-Manual_Misc

96% Variable-Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Variable-speed blower motor and two-stage gas valve provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with compatible heat pump & thermostat for energy-saving heating performance
  • As a two-stage furnace, it operates at low stage most of the time to save energy, smoothly ramping up the heat to high stage as temperatures drop
  • Fully insulated cabinet helps keep the heat moving to your ductwork and provides quiet operation
  • Air purifier and humidifier compatible
  • Wi-Fienabled remote access with the IonSystem Control±

    International Comfort Products G96CTN0801714A

    • Item#:
    G96CTN0801714A
    Manufacturer Item:
    G96CTN0801714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96CTN-Care_Misc
    G96CTN_Install
    G96CTN_Spec

    Unit Heater Natural Gas Power Vented 150K 83% AFUE 120 VAC

  • Reznor Model UDX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDX heaters are approved for installation in the United States and Canada by ETL.
  • Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays).
  • Reznor model UDX unit heaters feature a two-tone black and white powder coated, scratch-resistant paint scheme. Each unit has clean rounded corners and edges with no visible screws or fasteners. Model UDX unit heaters provide the same superior performance customers have relied on for more than 100 years along with added features that make servicing the unit easier, installation safer and improve monitoring capabilities
  • Sizes 30-400 MBTUH certified for commercial/industrial heating application
  • Sizes 30-125 MBTUH carry an additional approval for use in residential garage/workshop heating applications
  • 50-60°F Rise range
  • Integrated circuit board with 7 segment display
  • External status indicating LED
  • Hinged door with ¼ turn latch
  • Improved cabinet design with removeable front face and two tone white and black powder paint.
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented single burner combustion system including a one-piece burner assembly
  • 115V, 1 phase, 60 Hz supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 10,000 ft. elevation)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas pipe connection
  • Full fan guard
  • Optional Features
    Single-stage propane gas valve (field adjustable for operation to 10,000 ft.)
  • Two-stage gas valve (sizes 60-400)
  • 409 or 316 stainless steel heat exchangers
  • Totally enclosed fan motor (sizes 30-400)
  • Vent cap
  • Thermostat
  • Integrated vertical louvers
  • Integrated 30° & 60° downturn nozzles
  • Gas conversion kits (natural and propane)
  • Primary/secondary controls for zoning up to six units
  • Ceiling suspension kit - Sizes 30-125
  • Hanger kits for 1 pipe
  • Stepdown transformer (for 208/115, 230/115 or 460/115 Supply voltage)
  • Manual shutoff valves

    Reznor UDX-150

    • Item#:
    UDX-150
    Manufacturer Item:
    UDX-150
    Manufacturer:
    REZNOR LLC
     
    UDX-REZNOR_SPEC

    Oil Furnace Lo-Boy 97-101K BTU Output 85-86.2% AFUE 120 VAC 6" Flue Direct Drive Front Flue (BURNER NOT INCLUDED)

    Williamsom-Thermoflo CLB-105-DD-F-x-W-S2 Powder Coat Paint Oil Furnace, 85.9% AFUE, 91000/105000/119000 BTU Input, 79400/90200/101200 BTU Output, 1325 cfm
      Less burner
    • Front flue
    • Interior baffling for maximum efficiency
    • 3.5 Ton cooling capacity
    • Heavy gauge with seal-tite construction and foil-faced insulation for hand-cool surface
    • Spring loaded observation port with test port
    • 18-1/2" width x 17-1/2" depth supply air outlet
    • 18-1/2" width x 15-1/2" depth return air outlet
    • 6" flue diameter
    • Heavy gauge burner mounting plate with studs and nuts
    • Heavy-gauge with seal-tite construction
    • Preformed slide out chamber for easy service

      williamson -thermoflo clb105ddfxws2

    Item#:
    CLB105DDFXWS2
    Manufacturer Item:
    CLB105DDFXWS2
    Manufacturer:
    WILLIAMSON -THERMOFLO
     
    ClB-Direct-Drive-Manual_Misc
    CLB-Series_Spec
    CLB-Variable-Drive-Manual_Misc

    96% Variable-Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Variable-speed blower motor and two-stage gas valve provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with compatible heat pump & thermostat for energy-saving heating performance
  • As a two-stage furnace, it operates at low stage most of the time to save energy, smoothly ramping up the heat to high stage as temperatures drop
  • Fully insulated cabinet helps keep the heat moving to your ductwork and provides quiet operation
  • Air purifier and humidifier compatible
  • Wi-Fienabled remote access with the IonSystem Control±

    International Comfort Products G96CTN0601714A

    • Item#:
    G96CTN0601714A
    Manufacturer Item:
    G96CTN0601714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G96CTN-Care_Misc
    G96CTN_Install
    G96CTN_Spec

    Unit Heater Natural Gas Power Vented 125K 83% AFUE 120 VAC

  • Reznor Model UDX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDX heaters are approved for installation in the United States and Canada by ETL.
  • Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays).
  • Reznor model UDX unit heaters feature a two-tone black and white powder coated, scratch-resistant paint scheme. Each unit has clean rounded corners and edges with no visible screws or fasteners. Model UDX unit heaters provide the same superior performance customers have relied on for more than 100 years along with added features that make servicing the unit easier, installation safer and improve monitoring capabilities
  • Sizes 30-400 MBTUH certified for commercial/industrial heating application
  • Sizes 30-125 MBTUH carry an additional approval for use in residential garage/workshop heating applications
  • 50-60°F Rise range
  • Integrated circuit board with 7 segment display
  • External status indicating LED
  • Hinged door with ¼ turn latch
  • Improved cabinet design with removeable front face and two tone white and black powder paint.
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented single burner combustion system including a one-piece burner assembly
  • 115V, 1 phase, 60 Hz supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 10,000 ft. elevation)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas pipe connection
  • Full fan guard
  • Optional Features
    Single-stage propane gas valve (field adjustable for operation to 10,000 ft.)
  • Two-stage gas valve (sizes 60-400)
  • 409 or 316 stainless steel heat exchangers
  • Totally enclosed fan motor (sizes 30-400)
  • Vent cap
  • Thermostat
  • Integrated vertical louvers
  • Integrated 30° & 60° downturn nozzles
  • Gas conversion kits (natural and propane)
  • Primary/secondary controls for zoning up to six units
  • Ceiling suspension kit - Sizes 30-125
  • Hanger kits for 1 pipe
  • Stepdown transformer (for 208/115, 230/115 or 460/115 Supply voltage)
  • Manual shutoff valves


    Reznor UDX-125

    • Item#:
    UDX-125
    Manufacturer Item:
    UDX-125
    Manufacturer:
    REZNOR LLC
     
    UDX-REZNOR_SPEC

    Oil Furnace Hi-Boy 119K BTU Output 85-86.2% AFUE 120 VAC 7" Flue Heavy Gauge Heat Exchanger, Slide Out Chamber, Direct Drive Motor

    Williamsom-Thermoflo CHB-140-VS-S2-W Powder Coat Paint Oil Furnace, 85.9% AFUE, 140000/175000 BTU Input, 120000/148500 BTU Output, 1800 cfm
      Front flue with top or right side venting option
    • Interior baffling for maximum efficiency
    • 5 Ton cooling capacity
    • Heavy gauge with seal-tite construction and foil-faced insulation for hand-cool surface
    • Spring loaded observation port with test port
    • 24" width x 23-1/4" depth supply air outlet
    • 16" width x 28" depth return air outlet
    • 7" flue diameter
    • Heavy gauge burner mounting plate with studs and nuts
    • Fully enclosed burner and controls
    • Preformed slide out chamber for easy service

      Williamson -Thermoflo CHB-140-VS-S2-W

    Item#:
    CHB-140-VS-S2-W
    Manufacturer Item:
    CHB140VSS2W
    Manufacturer:
    WILLIAMSON -THERMOFLO
     
    CHB-Direct-Drive-Manual_Misc
    CHB-Series_Spec
    CHB-Variable-Drive-Manual_Misc

    Unit Heater Natural Gas Power Vented 75K 83% AFUE 120 VAC

  • Reznor Model UDX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDX heaters are approved for installation in the United States and Canada by ETL.
  • Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays).
  • Reznor model UDX unit heaters feature a two-tone black and white powder coated, scratch-resistant paint scheme. Each unit has clean rounded corners and edges with no visible screws or fasteners. Model UDX unit heaters provide the same superior performance customers have relied on for more than 100 years along with added features that make servicing the unit easier, installation safer and improve monitoring capabilities
  • Sizes 30-400 MBTUH certified for commercial/industrial heating application
  • Sizes 30-125 MBTUH carry an additional approval for use in residential garage/workshop heating applications
  • 50-60°F Rise range
  • Integrated circuit board with 7 segment display
  • External status indicating LED
  • Hinged door with ¼ turn latch
  • Improved cabinet design with removeable front face and two tone white and black powder paint.
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented single burner combustion system including a one-piece burner assembly
  • 115V, 1 phase, 60 Hz supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 10,000 ft. elevation)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas pipe connection
  • Full fan guard
  • Optional Features
    Single-stage propane gas valve (field adjustable for operation to 10,000 ft.)
  • Two-stage gas valve (sizes 60-400)
  • 409 or 316 stainless steel heat exchangers
  • Totally enclosed fan motor (sizes 30-400)
  • Vent cap
  • Thermostat
  • Integrated vertical louvers
  • Integrated 30° & 60° downturn nozzles
  • Gas conversion kits (natural and propane)
  • Primary/secondary controls for zoning up to six units
  • Ceiling suspension kit - Sizes 30-125
  • Hanger kits for 1 pipe
  • Stepdown transformer (for 208/115, 230/115 or 460/115 Supply voltage)
  • Manual shutoff valves



    Reznor UDX-75

    • Item#:
    UDX-75
    Manufacturer Item:
    UDX-75
    Manufacturer:
    REZNOR LLC
     
    UDX-REZNOR_SPEC

    Oil Furnace Hi-Boy 119K BTU Output 85-86.2% AFUE 120 VAC 7" Flue Direct Drive

    Williamsom-Thermoflo CHB-140-DD-x-W-S2 Powder Coat Paint Oil Furnace, 85.9% AFUE, 140000/175000 BTU Input, 120000/148500 BTU Output, 1800 cfm
      Less burner
    • Front flue with top or right side venting option
    • Interior baffling for maximum efficiency
    • 5 Ton cooling capacity
    • Heavy gauge with seal-tite construction and foil-faced insulation for hand-cool surface
    • Spring loaded observation port with test port
    • 24" width x 23-1/4" depth supply air outlet
    • 16" width x 28" depth return air outlet
    • 7" flue diameter
    • Heavy gauge burner mounting plate with studs and nuts
    • Fully enclosed burner and controls
    • Preformed slide out chamber for easy service

      Williamson -Thermoflo CHB140DDXWS2

    Item#:
    CHB140DDXWS2
    Manufacturer Item:
    CHB140DDXWS2
    Manufacturer:
    WILLIAMSON -THERMOFLO
     
    CHB-Direct-Drive-Manual_Misc
    CHB-Series_Spec
    CHB-Variable-Drive-Manual_Misc

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL1102120A

    • Item#:
    G80CTL1102120A
    Manufacturer Item:
    G80CTL1102120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    Unit Heater Natural Gas Power Vented 45K 83% AFUE 120 VAC

  • Reznor Model UDX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDX heaters are approved for installation in the United States and Canada by ETL.
  • Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays).
  • Reznor model UDX unit heaters feature a two-tone black and white powder coated, scratch-resistant paint scheme. Each unit has clean rounded corners and edges with no visible screws or fasteners. Model UDX unit heaters provide the same superior performance customers have relied on for more than 100 years along with added features that make servicing the unit easier, installation safer and improve monitoring capabilities
  • Sizes 30-400 MBTUH certified for commercial/industrial heating application
  • Sizes 30-125 MBTUH carry an additional approval for use in residential garage/workshop heating applications
  • 50-60°F Rise range
  • Integrated circuit board with 7 segment display
  • External status indicating LED
  • Hinged door with ¼ turn latch
  • Improved cabinet design with removeable front face and two tone white and black powder paint.
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented single burner combustion system including a one-piece burner assembly
  • 115V, 1 phase, 60 Hz supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 10,000 ft. elevation)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas pipe connection
  • Full fan guard
  • Optional Features
    Single-stage propane gas valve (field adjustable for operation to 10,000 ft.)
  • Two-stage gas valve (sizes 60-400)
  • 409 or 316 stainless steel heat exchangers
  • Totally enclosed fan motor (sizes 30-400)
  • Vent cap
  • Thermostat
  • Integrated vertical louvers
  • Integrated 30° & 60° downturn nozzles
  • Gas conversion kits (natural and propane)
  • Primary/secondary controls for zoning up to six units
  • Ceiling suspension kit - Sizes 30-125
  • Hanger kits for 1 pipe
  • Stepdown transformer (for 208/115, 230/115 or 460/115 Supply voltage)
  • Manual shutoff valves

    Reznor UDX-45

    • Item#:
    UDX-45
    Manufacturer Item:
    UDX-45
    Manufacturer:
    REZNOR LLC
     
    UDX-REZNOR_SPEC

    Oil Furnace Hi-Boy 97-101K BTU Output 85-86.2% AFUE 120 VAC 6" Flue Heavy Gauge Heat Exchanger, Slide Out Chamber, Direct Drive Motor

    Williamsom-Thermoflo CHB-105-VS-S2-W Powder Coat Paint Oil Furnace, 85.9% AFUE, 91000/105000/119000 BTU Input, 79100/89400/101100 BTU Output, 1300 cfm
      Front flue with top or right side venting option
    • Interior baffling for maximum efficiency
    • 3.5 Ton cooling capacity
    • Heavy gauge with seal-tite construction and foil-faced insulation for hand-cool surface
    • Spring loaded observation port with test port
    • 21" width x 20" depth supply air outlet
    • 15" width x 22" depth return air outlet
    • 6" flue diameter
    • Heavy gauge burner mounting plate with studs and nuts
    • Fully enclosed burner and controls
    • Preformed slide out chamber for easy service

      Williamson -Thermoflo CHB-105-VS-S2-W

    Item#:
    CHB-105-VS-S2-W
    Manufacturer Item:
    CHB105VSS2W
    Manufacturer:
    WILLIAMSON -THERMOFLO
     
    CHB-Direct-Drive-Manual_Misc
    CHB-Series_Spec
    CHB-Variable-Drive-Manual_Misc
    |◀ ◀ 25 - 36 of 659 ▶ ▶|
    View: