CPS Products SPM-K1 Dual Port Manometer and Probe Kit Plus/Minus 75" WC -40 - +185 Degrees,

CPS Products SPM-K1

Fieldpiece Instruments This non-contact voltage detector features an analog feel. The closer the probe is to the voltage source, the louder and brighter the indicators become. Detects AC voltages without contact and features a bright red LED light and buzzer. With a 24 VAC - 440 VAC range of the SNCV1 offers technicians the ability to test thermostats and other HVAC/R parameter easily. Clips to your shirt pocket and is a quick source to find out whether that line is hot or not. Fieldpiece Instruments designs hand-held test instruments exclusively for HVACR technicians. Fieldpiece pioneered modular expandability, a concept where a single meter uses multiple slide-on accessory head instruments, to test most parameters HVACR technicians use everyday

Fieldpiece Instruments SNCV1

Fieldpiece Instruments S365 Charging JacketCharging Jacket is a reliable way to charge TXV systems in cold weather. Normally, low temperatures remove too much heat from the condenser coils, so HVACR professionals should only work on TXV systems when the outside air temperature is 70 deg F or higher. Now, the new Fieldpiece Charging Jacket solves that problem, and TXV systems can be accurately charged down to 37 deg F outside temps. It's the perfect tool to dramatically extend the hours in a day, and the days in a year, where techs can install, service, and charge TXV systems. Made from parachute-grade material, the Charging Jacket is attached to the top of a split TXV system with hooks, so that the air inlet is not restricted. Then the unit is turned on the jacket puffs up from the air being forced out of the air outlet. The top is then adjusted with a drawstring until the proper pressure differential is reached between the high and low side (between 160 psi and 220 psi for R410A; and between 100 psi and 145 psi for R22). Once the systems stabilizes for 15 minutes at the correct pressure differential, the system is ready to be charged.

Charge TXV systems in cold weather
• Charge TXV systems from 37 - 70 deg F outside
• Service maintenance contracts before and after the summer heat
• Easy to adjust to reach correct pressure differential
• Great way to increase business during the slow season
• Field tested for accuracy
• Looks professional
• Extend billable hours
• There is no other product on the market made specifically for this purpose
• Currently, HVACR professionals either do not work on TXV systems if it is below 70 deg F outside, or, if it's an emergency techs might use their actual jackets or cardboard to block the air inlet
• The problem is those methods are inaccurate
• The charging jacket's advantage is that it works to bring the pressure drop across the TXV to at least 160 psi and therefore has the same effect on the system as higher temperatures do
• HVACR professionals can now dramatically extend their billable hours because they can work on systems during the off season
• So instead of having the do service contract check-ups during the summer rush, service and maintenance can be start early in the spring, and continue late into the fall
• And even year-round in many parts of the country
• Parachute grade
  

  Fieldpiece Instruments S365

Fieldpiece Instruments ST4 Ruggedized Rubber Digital Display Dual The Fieldpiece dual-temperature meter, model ST4, measures 2 temperatures simultaneously using the included k-type, wrap tab beaded thermocouples. The technology inside the ST4 provides superior temperature compensation in rapidly changing environments commonly found while performing field service. Use the ST4 to find delta T and just about any temperature split you want to measure. Displays T1, T2 and T1-T2 in big numbers on the LCD screen. Features 2 front face calibration pots and comes in our clear front case with magnetic hanger model ANC6. Use with our optional ATWB1 wet bulb thermocouple to help you find target superheat or with our pipe clamp T/Cs to check for blocked dryer filters. Because of the technology employed inside the ST4, it offers superior temperature compensation in rapidly changing environments commonly found while performing field service. Meters with thermocouple adapters often take a long time to stabilize due to transfer of ambient heat. The ST4, as with all of our k-type thermometers and meters, stabilizes rapidly so you can take it from the rooftop to the walk-in and get more accurate readings faster than the competition. Plus it includes the rugged rubber boot and the hanging bag for easy, hands-free testing, while you're working on the rest of your call.

Fieldpiece Instruments ST4

Weiss TL Gauges are intended for general service conditions, for pressure or vacuum on air, oil, water, gas or other mediums that do not attack brass. TL Gauges are furnished in drawn steel cases, finished in black.

Lower mount


Holyoke Fittings W31

Weiss TL Gauges are intended for general service conditions, for pressure or vacuum on air, oil, water, gas or other mediums that do not attack brass. TL Gauges are furnished in drawn steel cases, finished in black.

Push-in polycarbonate window
• White coated metal lithographed with black and red graduations lines and numerals, dual scale dial
• Black pointer
• Brass movement, aluminum pointer
  

  Weiss Instruments TL35-030-4L

Uniweld TGB230 Steel/Aluminum Case Gas Test Gauge, 2" Dial, 1/2"

Uniweld TGB230

Weiss TL Gauges are intended for general service conditions, for pressure or vacuum on air, oil, water, gas or other mediums that do not attack brass. TL Gauges are furnished in drawn steel cases, finished in black.

Lower mount


Holyoke Fittings W31-1

Weiss TL gauges are intended for general service conditions, for pressure or vacuum on air, oil, water, gas or other mediums that do not attack brass. TL gauges are furnished in drawn steel cases, finished in black. All gauges conform with ANSI B40.1 accuracy Grade B-2% mid scale.

Balanced design, aluminum in black finish pointer
• Brass movement
• Drawn steel case, finished in black with push-in polycarbonate window
• White coated metal lithographed dial with black and red graduations lines and numerals, dual scale - psi and kPa
• Brass socket, bronze tube soft soldered to socket and tip
  

  Weiss Instruments TL25P030CBM

Fluid Handling TL40-300-4L Steam Pressure Gauge 0-300 psi 4" Diameter Bottom Mounting 1/4" MPT

Fluid Handling TL40-300-4L

Weiss Instrument TL40-060-4L Steam Pressure Gauge 0-60 psi 4" Diameter Bottom Mounting 1/4" MPT

Weiss Instrument TL40-060-4L

Weiss instruments TL40-030-4L Steam Pressure Gauge 4" Diameter 0-30 psi Bottom Mounting 1/4" MPT

Holyoke Fittings W31-11