M12 Plastic Pipe Shear can slice through 2 inch schedule 80 PVC in just 3 seconds. The cordless plastic pipe shear is compatible with M12 lithium-ion batteries (not included), providing you with more than 200 cuts on a single charge. The stainless steel blade and aluminum jaw are impact, water and rust resistant. The ultra- sharp MILWAUKEE M12 plastic pipe shear with pierce point makes burr-free cuts, helping you cut faster, cleaner and closer than traditional shears. PVC close to a wall or mounted to a stud is no challenge for the quick-return, offset blade providing you with maximum efficiency on repetitive cuts. The plastic pipe shear features a variable speed trigger for controlled cuts in warm and cold weather and an on-board fuel gauge that displays remaining battery charge and run time, giving you the versatility and productivity you need

Milwaukee Tools 2470-20

Jaw Kit for the M12 FORCE LOGIC Press Tool provides a complete carbon and stainless-steel press solution for the residential and light commercial plumbing and heating contractor. The Jaws are designed for the highest standard of press quality on Iron Pipe Size (IPS) press fittings. Designed for use with the M12 FORCE LOGIC Press Tool, these jaws offer you the lightest solution in the industry for pressing Schedule 5 to Schedule 40 IPS carbon and stainless steel fittings. The MILWAUKEE M12 FORCE LOGIC Press Tool features an inline design allowing you to operate one-handed for unrivaled access in tight spaces.

Milwaukee Tool Force Logic M12 Cordless Press Tool Kit, 5 sec Crimp Time,,

M12 TRAPSNAKE 6 ft. Toilet Auger Kit is the ideal solution for service plumbers and facility maintenance crews to unclog toilets and floor traps. Powered by the M12 TRAPSNAKE Driver, the first powered unit optimized for the challenges of porcelain fixtures, this unit delivers power and speed to work through tough clogs in tight traps. Optimized electronics protect the fixture from the auger and allow the user to feel when engaged with a blockage to aid in retrieving. The M12 TRAPSNAKE 6' Toilet Auger features several industry-firsts including a fixed rubber boot for maximum porcelain protection, an integrated locking mechanism that holds the cable in place for easy telescoping extension, and replaceable cables to maximize the longevity of the tool. As part of the TRAPSNAKE Porcelain Auger System, users can interchange the M12 TRAPSNAKE Driver with the auger handle or use with other auger attachments for versatility and capabilities never seen before in a closet auger. This kit includes an M12 TRAPSNAKE Driver, one M12 REDLITHIUM CP 1.5 Battery Pack, and an M12 Battery Charger.

M12 FUEL 16-Gauge Variable Speed Nibbler is a compact light weight tool that provides the same cutting capacity as its 18V competitors on a 12V system. Delivering fast clean cuts in 16-gauge mild steel, the nibbler is rated for 18-gauge stainless steel and 12-gauge aluminum. Our M12 FUEL 16-Gauge Variable Speed Nibbler has the power to perform in heavy applications such as cutting up to 22-gauge spiral duct seams. The nibbler tool provides a variable speed dial, tool-free die holder orientation change, and LED work light offers maximum control and productivity. The unique chip collection bag, kitted with the tool, reduces jobsite cleanup. Our compact and light weight form factor enables greater access and mobility on the jobsite.

Milwaukee Tools 2476-20

M12 Variable Speed Polisher/Sander. Optimized to provide the fastest and most precise detail work, the new tool performs the work of two tools in one by easily switching between polishing and sanding modes. As the most compact cordless polisher on the market, the M12 Polisher/Sander is the perfect complement to a full size polisher for a faster finish. Featuring Dual Mode Control and a variable speed trigger, the M12 Polisher/Sander delivers increased user control, regardless of the application. A tool-free accessory change allows the user to quickly change between polishing and sanding accessories.

Press Jaws are designed for use with Viega MegaPress, "Apollo" PowerPress and other press fitting systems to unlock a more efficient alternative to threading and welding. The IPS-P Jaw and Ring Kit is optimized for use with our M18 FORCE LOGIC Press Tools to press connections on 1/2"-1" schedule 5 up to schedule 40 black iron pipe and 304/316 stainless steel pipe. The ring jaw connects directly to M18 FORCE LOGIC Press Tools, providing you with secure joints in one cycle. The 1/2"-1" IPS-P Press Jaw Kit combined with M18 FORCE LOGIC Press Tools has the lightest in-line design giving you unrivaled access in tight spaces and around installed pipes, providing you with controlled, flameless steel connections for unmatched productivity.

Milwaukee Tools 2635-22 M18 18 Gauge Double Cut Shear Kit

M18 Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18 REDLITHIUM 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.

HAMMERVAC 1 in. Dedicated Dust Extractor (2912-DE) features an inline design engineered to connect directly to and be power by the MILWAUKEE M18 FUEL 1 in. SDS Plus Rotary Hammer (2912-20 and 2914-20). Utilizing the same replaceable certified HEPA filter as other HAMMERVACS, which filters 99.97% of all particles greater than 0.3µm, means more compatibility on the jobsite. The built-in adjustable depth stop and ruler offers easy and precise adjustments. The dust extractor allows full OSHA Table One Compliance when drilling up to 1 in. diameter and 6 in. in depth. This extractor features our AUTOPULSE Filter Cleaning Mechanism that automatically cleans the filter after each use, ensuring you drill more effectively and for longer before needing to empty the dust box. The dust box comes equipped with a vacuum port that allows you to suction out the dust with a large vacuum or dust extractor (such as the 8960-20) instead of dumping the dust out into a trash receptacle, ensuring minimal exposure.

Drum w/ Anchor Cable for M18 Drum Machine (47-53-2817) gives drain technicians increased versatility to have multiple sized cables for tackling clogs in 1-1/2-4 drain lines. The Drum w/ Anchor Cable for M18 Drum Machine can hold up to 100 of 3/8 Inner Core Cable and up to 75 of 1/2 Inner Core Cable. The 3/8" cable is best for use on 1-1/2"- 3" drain lines and 1/2" cable is best for use on 3-4" drain lines. Our Drum w/ Anchor Cable for M18 Drum Machine is also compatible with our CABLE DRIVE Assembly (47-53-2816) that allows you to automatically feed and retract cable up to 15-20 feet per minute. Cable sizes available are 3/8" x 75' (48-53-2776), 3/8" x 100' (48-53-2777) and 1/2" x 75' (48-53-2778).

M18 2-Tool Combo Kit (2892-22CT) offers the best in compact brushless drilling and fastening solutions. The 1/2" Compact Brushless drill/driver (2801-20) and 1/4" Hex Compact Brushless impact driver (2850-20) feature the M18 cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics, providing the most efficient blend of power, weight and performance in the industry. At 6.5 in length and 500 in-lbs of torque, the compact 1/2" drill/driver is the best combination of size and power in its class, while the compact 1/4" hex impact driver has the fastest application speed in its class and delivers 1,600 in.-lbs. of torque. Both of our compact brushless tools feature MILWAUKEE brushless motors optimized specifically for the tool. Built-in REDLINK electronics enhances the performance of the M18 REDLITHIUM batteries, providing more efficient power delivery and fewer trips to the charger. This combo kit includes our M18 1/2" Compact Brushless Drill/Driver, M18 1/4" Compact Brushless Hex Impact Driver, (2) M18 REDLITHIUM CP2.0 Batteries, a M18/M12 Multi-Voltage Charger, (2) Belt Clips, and a Contractor Bag.