Midwest P6510L Left Cut Offset Aviation Snip, 18/22 ga Cold Rolled Steel/Stainless Steel, 9-3/4" OAL

• Offset models in 3-blade patterns keep user's hand above material being cut and flow material away from blades for ease of cut
• Cuts tighter curves than regular aviation snips
• Easiest used in right hand
• Bottom blade serrated
• Long blade life, precision-formed blades for aviation and bulldog snips
• Ultimate spring durability, reinforced chrome silicone valve-quality wire lasts for a lifetime
• Quick identification - color coding on both blades and handles plus arrow icons allow

Sid Harvey Item #:P6510-L: Replaces Part #:'s : 14516,
,

Midwest P6510-L

Midwest P6510R Right Cut Offset Aviation Snip, 18/22 ga Cold Rolled Steel/Stainless Steel, 9-3/4" OAL

• Offset models in 3-blade patterns keep user's hand above material being cut and flow material away from blades for ease of cut
• Cuts tighter curves than regular aviation snips
• Easiest used in right hand
• Bottom blade serrated
• Long blade life, precision-formed blades for aviation and bulldog snips
• Ultimate spring durability, reinforced chrome silicone valve-quality wire lasts for a lifetime
• Quick identification - color coding on both blades and handles plus arrow icons allow

Sid Harvey Item #:P6510-R: Replaces Part #:'s : 14517,
,

Midwest P6510-R

Malco hand seamers, with forged steel jaws, are the premier choice for bending, folding, flattening and straightening sheet metal edges or safely gripping and moving sheet metal around the job site. These seamers are available in 3" (76.2 mm) and 6" (152.4 mm) jaw widths as well as an offset 3" (76.2 mm) size for overhead work. The drop-forged, high-impact jaws feature depth markings graduated in 1/4" (6.4 mm) increments and are complimented by a powerful compound leverage design. Easily bend flanges or completely flatten seams from 1/4 - 1-1/4" (6.4 - 31.8 mm) deep in 24 ga (0.71 mm) Galvanized or (0.61 mm) mild steel.

• Malco's hand seamers, with forged steel jaws, also feature ergonomic RedLine Handle technology
• An engineered handle opening compliments the natural power stroke of any user's hand maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage
• Comfortable handle grip contours, a non-slip grip insert, spring handle actuation and a thumb-operated handle latch ensure a natural fit and feel for comfortable one hand operation anywhere on the job
• Bend, fold, flatten, straighten sheet metal on the job

,
,

Malco S6R

The time-saving Turboshear model number TS1 inserts directly into the chuck of a standard 1200 RPM A/C or cordless drill. Its that easy to convert your power drill to a power shear! This rugged but inexpensive accessory cuts straight and to the left and is capable of navigating tight curved patterns and squares in heavy 20-gauge (1.02 mm) Galvanized steel. Blind cuts require only a 1/2" starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, ductwork, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. An offset design keeps both hands away from work surface. Long-wearing hardened jaws are also replaceable. For premium performance without the premium price of a dedicated power shear, Turboshear is an easy addition to every tool bag.

• Inserts into chuck of A/C or cordless drill
• Offset design saves hands
• Navigates tight patterns and square cuts
• Cuts a variety of building materials
• Cut-away view
• Tsdc drill clamp (optional)
• Made in the U.S.A.

,
,

Malco TS1

JB Industries T30251 Refrigeration Oil Pump (5 Gallon)

The original Max2000 features euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrower handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. All Max2000 aviation snips feature superior hardened blade edges for"maximum" cutting life. Riveted, head-to-handle compound linkage multiplies hand leverage applied by user. Linkage will not rattle or loosen ever! and an easily adjustable pivot bolt, with nylon locking nut, holds its adjustment securely for these hard-working aviation snips.

• Fast offset cuts in vinyl plastics, layered metal and seams
• Superior cutting life
• Compound linkage multiplies user hand leverage
• Adjustable pivot bolt
• Handles fit large or small hands
• Cuts sharp right angles, straight lines and 5" diameter circles
• Feature a serrated upper jaw of hardened alloy steel and a forged steel lower jaw to produce a strong, sharply defined cutting edge for superior offset maneuverability and cutting performance
• Extra-long-life compression spring
• Permanent riveted handles will not loosen and latch will not hang up

,
,

Malco DS2 Anodized Aluminum Offset Duct Stretcher, 16" OAL

• Use the duct stretcher to hold duct in place with 1 hand while slipping drive cleat in place with other hand
• The low profile, straight body is designed to go anywhere, even in the tightest quarters
• Additional spacing holes allow wheels to be adjusted to span greater distances
• Rugged anodized aluminum body features large vinyl cushion grip and handy hang-up holeSid Harvey Item #:T646-6: Replaces Part #:'s : 13167,
  ,
  
  
  

  Malco T646-6

The non-slip serrated jaws of Wiss metalmaster snips are made of tough, wear-resistant molybdenum steel to provide the durability demanded by the compound lever action and to withstand the severe strain of cutting heavy stock or tight curves. The handles are formed of special high strength steel and have a margin of strength far above the amount of hand pressure that can be applied.

• Cuts straight (or wide curves left or right in light stock)
• Accomplishes most metal cutting requirements of the home crafts man

Sid Harvey Item #:T652: Replaces Part #:'s : 5733,
,

Imperial Tools 208-F Inner-Outer Reaming and Deburring Tool, 3/16 - 1-1/2" OD, Blue

• Reams both inside and outside edges of tube with (3) hollow ground cutters
• Deburrs both clockwise and counter clockwise
• Fluted body is shaped to fit comfortably in palm
• Tough die cast construction

,
,

The non-slip serrated jaws of Wiss MetalMaster snips are made of tough, wear-resistant molybdenum steel to provide the durability demanded by the compound lever action and to withstand the severe strain of cutting heavy stock or tight curves. The handles are formed of special high strength steel and have a margin of strength far above the amount of hand pressure that can be applied.

• cuts right from tight curves to straight-red grips
• Non-slip serrated jaw of tough molybdenum steel holds material firmly and uniformly spreads cutting force across blade edge
• Withstands strain of cutting heavy stock
• Spring action for fast, effortless feed
• Non-slip, textured grips and safety latch

Sid Harvey Item #:T652-2: Replaces Part #:'s : 5732,
,

The non-slip serrated jaws of Wiss MetalMaster snips are made of tough, wear-resistant molybdenum steel to provide the durability demanded by the compound lever action and to withstand the severe strain of cutting heavy stock or tight curves. The handles are formed of special high strength steel and have a margin of strength far above the amount of hand pressure that can be applied.

• cuts left from tight curves to straight-red grips
• Non-slip serrated jaw of tough molybdenum steel holds material firmly and uniformly spreads cutting force across blade edge
• Withstands strain of cutting heavy stock
• Spring action for fast, effortless feed
• Non-slip, textured grips and safety latch

Malco 12F Folding Tool, 22 ga Sheet Metal, 12" L

• Folding tool seams are formed from two steel halves, permanently joined together
• Handy sight holes assure proper depth alignment

Sid Harvey Item #:T646-3: Replaces Part #:'s : 13019,
,

Malco T646-3