Nu-Calgon 4188-05 Freez-Kontr'l is a formulation of propylene glycol, dipotassium phosphate corrosion inhibitor and de-ionized water. The fluid is colored blue to aid in leak detection. It has an operating temperature range from below -60 to 230 deg F and solutions in water provide freeze protection to below -60 deg F and burst protection to below -100 deg F. Freez-Kontr'l is nearly odorless and the product of choice when contact with potable water is possible. The ingredients used in its manufacture are GRAS (generally recognized as safe), under Title 21, Part 182 of the US Code of Federal Regulations, where accidental or incidental contact with potable water could occur.

Optimum freeze or burst protection
• Fully inhibited to prevent corrosion
• Non-flammable
• Uses renewable resourced propylene glycol
• Low in acute oral toxicity
• Colored blue for easy leak detection
• The complete heat transfer fluid and antifreeze
  
  

  Nu-Calgon 4188-05

Nu-Calgon 4330-05 Scale Dissolver 5Gallon,

Nu-Calgon 4330-05

Nu-Calgon 4287-34 Nickel-Safe ice machine cleaner is a specially formulated citric/phosphoric food-grade product for removing scale deposits from ice makers having nickel-plated or tin-plated evaporators. It is acceptable for use in machines made by Manitowoc and other manufacturers using nickel. In fact, it was the industry's first nickel-safe product, introduced in collaboration with Manitowoc. Usage rate should be in accordance with the manufacturers instructions or 16 fl oz with 3 Gallon of system water. The number one category of problems troubling an ice machine are water-related and the most frequently is lime scale. As the water is frozen into ice during an ice maker's cycle, the naturally occurring dissolved minerals in the water, some of which can combine to form lime scale, remain behind in the unfrozen recirculating ice water simply because water tries to freeze in its pure state. As the cycle continues and more water is made into ice, the minerals over concentrate and eventually precipitate as a lime scale deposit. As the scale begins to form, it creates a physical obstruction that results in: plugged distribution holes, restricted water flow and eventually the ice maker will hang-up or jam. Ice harvest is reduced and eventually the machine will shut down, requiring service. This sequence of events can affect both cubers and flakers. Some believe that flakers are free of scale problems since all of the water is made into ice. Not true. Flakers can scale-up as well, jamming the auger and eventually resulting in a broken belt or drive mechanism.

Nickel-safe ice machine cleaner is a specially formulated food-grade product
• Complete family of liquid ice machine cleaners
• Formulated for use in all makes and models of ice makers including those with nickel and tin plated evaporators
• Functional in cubers, flakers, drum and tube machines
  
  

  Nu-Calgon 4287-34

Nu-Calgon 4165-24 Drain Solve Drain Opener, 1 qt Bottle, Odorless, Clear, Drain Solve is an alkaline-based drain opener which removes grease, hair, vegetable and other organic matter. It is non-fuming and it will clean and clear drains quickly. Simply pour it down the drain and let it work without fear of noxious fumes or reactions that may squirt corrosive chemicals into face and eyes. This product is NSF registered.

Nu-Calgon 4165-24

Nu-Calgon 4207-P2 Liquid ice machine cleaner is a 75% phosphoric acid of the highest food-grade quality. It is fast acting yet very safe to use and it does not give off any harsh fumes. Because of its 75% phosphoric acid content, it is the most concentrated ice machine cleaner in the market. It has a specific gravity of 1.63 and weighs 13.6 lb/Gallon. Usage rate is 8 fl-oz with threeGallons of water. The number one category of problems troubling an ice machine are water-related and the most frequently is lime scale. As the water is frozen into ice during an ice maker's cycle, the naturally occurring dissolved minerals in the water, some of which can combine to form lime scale, remain behind in the unfrozen recirculating ice water simply because water tries to freeze in its pure state. As the cycle continues and more water is made into ice, the minerals over concentrate and eventually precipitate as a lime scale deposit. As the scale begins to form, it creates a physical obstruction that results in: plugged distribution holes, restricted water flow and eventually the ice maker will hang-up or jam. Ice harvest is reduced and eventually the machine will shut down, requiring service. This sequence of events can affect both cubers and flakers. Some believe that flakers are free of scale problems since all of the water is made into ice. Not true. Flakers can scale-up as well, jamming the auger and eventually resulting in a broken belt or drive mechanism.

Nu-Calgon 4207-P2

Nu-Calgon 4134-08 Calci-Solve Pipe Descaler, 1 Gallon Bottle, Liquid, Light Remove scale from lines and clear clogged drains easily and effectively with Calci-Solve. The product includes a special inhibitor that coats the inside of the pipes with a protective film, allowing the acid in Calci-Solve to quickly dissolve calcium, magnesium, sodium, lime, rust and other such elements without harming pipes.

Nu-Calgon 4134-08

Nu-Calgon 4209-05 Slime Control,

Nu-Calgon 4209-05

Nu-Calgon 4211-34 IMS-III is an economical sanitizer that eliminates odors and slime build-up in all ice machines. This product is a sanitizer designed for general use, in ice machines, ice cream dispensing equipment and other food dispensing equipment. Sanitize previously cleaned and rinsed non-porous food contact surfaces prepare 200 ppm active quaternary solution by adding 1.6 fl-oz of this product to 1 Gallon of water (8 oz per 5 Gallon of water).Sanitize ice machines, ice cream dispensing equipment and other food processing equipment, flood the area with solution, making sure to wet all surfaces completely for at least 60 sec. No rinsing is necessary; air dry and continue with equipment processing. Prepare a fresh solution for each use.

Nu-Calgon 4211-34

Nu-Calgon 4287-08 Nickel-Safe ice machine cleaner is a specially formulated citric/phosphoric food-grade product for removing scale deposits from ice makers having nickel-plated or tin-plated evaporators. It is acceptable for use in machines made by Manitowoc and other manufacturers using nickel. In fact, it was the industry's first nickel-safe product, introduced in collaboration with Manitowoc. Usage rate should be in accordance with the manufacturers instructions or 16 fl oz with 3 Gallon of system water. The number one category of problems troubling an ice machine are water-related and the most frequently is lime scale. As the water is frozen into ice during an ice maker's cycle, the naturally occurring dissolved minerals in the water, some of which can combine to form lime scale, remain behind in the unfrozen recirculating ice water simply because water tries to freeze in its pure state. As the cycle continues and more water is made into ice, the minerals over concentrate and eventually precipitate as a lime scale deposit. As the scale begins to form, it creates a physical obstruction that results in: plugged distribution holes, restricted water flow and eventually the ice maker will hang-up or jam. Ice harvest is reduced and eventually the machine will shut down, requiring service. This sequence of events can affect both cubers and flakers. Some believe that flakers are free of scale problems since all of the water is made into ice. Not true. Flakers can scale-up as well, jamming the auger and eventually resulting in a broken belt or drive mechanism.

Nu-Calgon 4287-08

Nu-Calgon 4720-06 pH-treat is an in-line treatment product for the treatment of the condensate water produced by today's high efficiency furnaces. The condensate produced by these furnaces is acidic and must be neutralized prior to putting to the drain. In fact, some communities are passing regulations banning the discharge of acidic condensate. Introducing pH-Treat, a product to put on the drain line for the purpose of neutralizing the acid nature of the condensate water produced.,

Nu-Calgon 4720-06

Nu-Calgon 4364-88 Season treat inhibits scale formation by holding the scale forming minerals in solution long enough to be carried away through the bleed off. It also forms a microscopic, thin protective film on metal surfaces to reduce corrosion. Because of 6R Micromet's consistent slow dissolve rate, it achieves a uniform concentration of treatment over a long period of time. When the product is about 2/3 dissolved, which should be in about 6 months of operation with average water temperatures, discard the remaining canister or charge of 6R micromet and add a new charge.

A season treat canister will last about 6 months in 75 deg F water
• Keeps equipment operating at designed capacity
• Prevents scale caused breakdowns
• Reduces maintenance and need for acid cleaning
• Prolongs equipment life
• Low cost treatment
• One charge lasts 5 - 6 months
  
  

  Nu-Calgon 4364-88