CRC 05050 Parts Cleaner 14 oz.

Nu-Calgon 4297-75 Pipe-Dri is an aerosol insulation which provides a moisture barrier to stop sweating and dripping on refrigeration lines, air conditioning lines, and other cold surfaces. Quickly adheres and dries to a hard water proof coating. Pipe-Dri's spray pattern permits spraying of odd shaped fittings and makes it possible to insulate hard to reach areas. Sweating and dripping are eliminated by this durable, waterproof protective barrier. It separates the warm moist air and the cold surface, preventing condensation from occurring. Pipe-Dri offers the ability to apply on odd shaped fittings and hard to reach areas. Reapplication will continue to build thickness as required. One can will normally cover approximately ten feet of 1" water pipe or eight square feet of flat surface area with two coats. Ideally, the product should be at room temperature (70- 75 deg F) and the surface to be coated at a lower temperature. A thick application is hard to form on warmer surfaces (above 80 deg F), however, a thicker coat may be achieved by applying 2 or more light coats. Once a coating has been allowed to dry and harden, it will be stable at temperatures up to 120 deg F.

Speed Clean CoilJet CJ-200E Direct Drive Diaphragm Portable HVAC Coil Cleaner System, 110 volt, 1.5 amp, 0.5 gpm

• On-board cord storage
• Spray gun with quick disconnect

,
,

Diversitech PF-KIT Pre-Flush HVAC Flushing Solvent Kit 8 oz Refill is a flushing solvent for A/C and refrigeration systems formulated for R-410A retrofits, refrigerant conversions and compressor burnouts. Compatible with all refrigerants and compressor oils. All solvents in Pro-Flush are non-VOC and conform to EPA SNAP standards low toxicity and residue-free. Available as a kit or in an 8 or 16 oz solvent refill. The kit makes servicing quick, easy, and safe, as well as assuring you get to the job site with all necessary hardware in hand for 1-stop servicing. The kit includes 8 oz container of Pro-Flush solvent, refillable Pro-Flush injector tool pressure tank, pressure relief valve for added safety, large rubber adapter that flushes up to 1-1/4" line sets, service hose.

• Low toxicity and residue free
• Formulated for R-410A retrofits, refrigerant conversions and compressor burnouts
• Compatible with CFC and HFC refrigerants and compressor oils
• Solvents are non-VOC and conform to EPA SNAP standards
• Economical - kit includes refillable tank, 8 oz can of Pro-Flush, injection tool and charging hose
• Refillable tank includes pressure relief valve for added safety ,
  ,
  
  
  

  Diversitech PF-KIT

Diversitech PF-16 HVAC Flushing Solvent 16 oz Refill is flushing solvent for A/C and refrigeration systems formulated for R-410A retrofits, refrigerant conversions and compressor burnouts. Compatible with all refrigerants and compressor oils. All solvents in Pro-Flush are non-VOC and conform to EPA SNAP standards low toxicity and residue-free. Available as a kit or in an 8 or 16 oz solvent refill. The kit makes servicing quick, easy, and safe, as well as assuring you get to the job site with all necessary hardware in hand for 1-stop servicing. The kit includes 8 oz container of Pro-Flush solvent, refillable Pro-Flush injector tool pressure tank, pressure relief valve for added safety, large rubber adapter that flushes up to 1-1/4" line sets, service hose.

Nu-Calgon 1903D PurCool strips are powerful, economical, preventive maintenance for A/C condensate drain pans. Just place them anywhere in the drain pan where the PurCool strips will contact the condensate water and enjoy up to six months of economical protection. PurCool strips will adhere to the drain pan and will not float or move. They dissolve completely, leaving no residue. Safe for metal and plastic drain pans.

Nu-Calgon 2001D PurCool Condensate Drain Pan Treatment Strip, 5 Ton, 7 - PurCool Strips are powerful, economical, preventive maintenance for A/C condensate drain pans. Just place them anywhere in the drain pan where the PurCool Strips will contact the condensate water and enjoy up to six months of economical protection. PurCool Strips will adhere to the drain pan and will not float or move. They dissolve completely, leaving no residue. Safe for metal and plastic drain pans. PurCool Strips keep A/C and refrigeration condensate drain pans clean and free flowing. Use PurCool Strips to prevent condensate drain clogs, costly overflow, and corrosion.,

Mars One-Shot is all it takes to instantly clear clogs. MARS One-Shot drain opener kit instantly clears blockages in all types of fixtures and drains while simultaneously delivering a specially designed enzyme ingredient. This enzyme continues to dissolve grease build-up in the drain long after the initial blockage was cleared. The kit includes: One-Shot drain opener can 7 oz., three foot extension hose and twist fit adapter for ice markers and condensate drain pans.

• Enzyme activated
• No ozone depleting chemicals
• Safe for sewers and septic systems
• Works instantly
• Sanitary and easy to use
• Universal adapter for all types of fixtures
• Seamless aluminum container will not rust
• For drains from 3/8 in ID to 7/8 ID
• 12 applications per can
• 0.15 g/L at 20 deg C solubility in water

,
,

Defender is the toughest and longest lasting coil coating you will ever need to apply. A onetime application is all that is necessary to protect coils and other metals exposed to corrosive environments. Defender is virtually impervious to salt water immersion, strong acids, caustic detergents, oxidation and ultraviolet light. Defender is a clear coat that bonds to all metal surfaces and can withstand temperatures to 400 deg F. Heat transfer is not compromised.,

Refrigeration Technologies Viper RT800S Condensate Pan and Drain Viper condensate pan and drain treatment is a sprayable gel that contains enzymes and silicone detergents. The enzymes are natural biological disruptors that will penetrate and break through the solid layers of slime, sludge and sediment. The silicone detergents coat the pan, p-trap and drain piping with a lubricative film to improve flow and prevent future soil adhesion. The slow dissolving gel will outperform and outlast conventional tablets and strips.,

E.S.P Company HB34 Reusable Heat Blocker (Heat Trap In A Can)

Nu-Calgon 4300-09 RX11-flush is a unique solvent that has been engineered for flushing refrigeration and air conditioning systems. Its patented HFC based solvent formulation is powerful enough to flush away sludge, carbon residue, oils, acids, water and other particulate. This makes it ideal for system flushing after burnouts, retrofits and for flushing line sets for R-410A conversions. It is non-toxic, non-flammable and is non-ozone depleting. From time to time, refrigeration and air conditioning systems suffer failures which result in contamination. The most common such failure is a compressor burnout. During such an event, the refrigeration system becomes contaminated with large quantities of unwanted particulate, sludge, acids, carbon residues and possibly moisture. All of these contaminants must be removed before the system can be returned to duty.