International Comfort Products Fast Parts R72DB0054 Brass Non-Bleed TxV 3/8 x 3/4" Threaded 2.5 - 5 Ton R-410A,
,

Packed line valves are designed for a multitude of uses in refrigeration systems. When installed properly, these handy, forged brass packed angle valves provide easy accessibility and serviceability for the refrigeration system. All packed angle valves are provided with a brass seal cap. The 617A Series charging and purging valves are designed to be installed on the branch or run of a solder-type tee. The valve can be readily positioned for easy access. These valves are shipped loosely assembled for easy removal of parts prior to soldering. Reassemble after installation with a standard 3/8" square wrench.

• Seal cap construction is brass with copper gasket or nylon gasket
• 3/8" OD x 1/4" Flare
• Steel stem with copper nickel plating
• Core of access fitting on 600Ax7-JB must be removed prior to soldering
• For use with CO2, CFC, HFC and HCFC refrigerants listed in CAN/CSA B52 and ANSI/ASHRAE 15 section 9.2

,

Henry Technologies S-9104H Brass Reservoir Pressure Valve, 3/8" SAE Female Flare x SAE Male Flare, 500 psi

• Proven design
• Two different pressure settings
• Premium quality teflon seal
• Stainless steel spring
• A reservoir pressure valve is used in a low pressure oil management system
• It is used to vent pressure in the oil reservoir while still maintaining a positive pressure differential between the Oil Reservoir and the compressor crankcase
• This positive pressure ensures an adequate oil supply to the oil level regulators
• The inlet of the valve should be connected directly to the oil reservoir and the outlet should be piped to suction pressure

,
,

Johnson Controls SEC99AA-24C Brass Sleeve and Copper Tubing Armored 24",

Johnson Controls SEC99AA-24C

Johnson Controls SEC99AA-36C Brass Sleeve and Copper Tubing Armored 36",

Johnson Controls SEC99AA-36C

Superior offers the most complete range of refrigeration relief valves in the industry with both low and high pressure ratings. All valves have been designed, constructed and rated in accordance with ANSI/ASHRAE 15 - 1994 standard safety code for mechanical refrigeration. Each valve is stamped UV/N. to indicate National Board certifications as to capacities. These pressure-relief valves are all Teflon seated, permitting their use in applications of either high or low temperatures where the conventional rubber seated valves are often completely unsatisfactory.

• Stainless steel spring material construction
• Initial leak set pressure plus/minus 3%
• Reset at 80% of set pressure
• 3/8" NPT x SAE 425 PSI,
  ,
  
  

Shurtape 105640 BR Duck Pro BR Code Heavy Duty, Permanent Scannable Labels

International Comfort Products Fast Parts 1171907 Breaker 2-Pole 60 Amp

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.

Fujitsu A/C Parts K9357921006

The Parker C-EC-SC series balance ported thermostatic expansion valves have a brass bar stock body with flare or sweat connections, adjustable superheat, long lasting replaceable power element and accessible internal parts. Each valve is factory tested to ensure positive leak-free performance. The balance port design provides perfect pin and port alignment and prevents pressure drop across the valve from influencing valve operation. Also available is the Parker C series interchangeable valve. These C valves are supplied in two components, the thermostatic element and the valve body. The interchangeable nature of this part of the C family makes it ideal for reducing inventory, while increasing valve options.

• Balanced port design
• Removable power element
• Field adjustable superheat
• The C(E) series incorporates a brass body with a 90 deg elbow inlet and SAE flare fittings using balanced port construction, allowing operation over varying load conditions
• Designed for use on small refrigeration and or air conditioning systems, the external equalized models are provided with a 1/4" SAE male connection
• 1/4" SAE external equalizer

,
,

The Parker C-EC-SC series balance ported thermostatic expansion valves have a brass bar stock body with flare or sweat connections, adjustable superheat, long lasting replaceable power element and accessible internal parts. Each valve is factory tested to ensure positive leak-free performance. The balance port design provides perfect pin and port alignment and prevents pressure drop across the valve from influencing valve operation. Also available is the Parker C series interchangeable valve. These C valves are supplied in two components, the thermostatic element and the valve body. The interchangeable nature of this part of the C family makes it ideal for reducing inventory, while increasing valve options.

• Balanced port design
• Removable power element
• Field adjustable superheat
• The C(E) series incorporates a brass body with a 90 deg elbow inlet and SAE flare fittings using balanced port construction, allowing operation over varying load conditions
• Designed for use on small refrigeration and or air conditioning systems, the external equalized models are provided with a 1/4" SAE male connection
• 1/4" SAE external equalizer

,
,

Parker C-A-3X4-SAE-BODY

Parker Brass Charge W External Equalizer Type C Thermostatic Expansion Valve, 1/4" x 1/2" Flare, 1/2-1 ton, R-402A, R-404A, R-507, R-402B, R-502

• The Parker C-EC-SC Series balance ported thermostatic expansion valves have a brass bar stock body with flare or sweat connections, adjustable superheat, long lasting replaceable power element and accessible internal parts. Each valve is factory tested to ensure positive leak-free performance. The balance port design provides perfect pin and port alignment and prevents pressure drop across the valve from influencing valve operation.
  
  • Also available is the Parker C Series Interchangeable valve. These C Valves are supplied in two components, the thermostatic element and the valve body. The interchangeable nature of this part of the C family makes it ideal for reducing inventory, while increasing valve options.
    
    • Markets
      
      • Air Conditioning
        
        • Refrigeration  Food Retail
          
          • Transportation
            
            • Industrial  Food Storage units
              
              • Features/Benefits:
                
                • Balance port design provides perfect pin and port alignment and prevents pressure drop across the valve from influencing valve operation
                  
                  • Thermostatic charges available to match system conditions
                    
                    • Available with external equalizer and internal equalizer
                      
                      • Design working pressure of 450 psi (31 bar)
                        
                        • Applications:
                          
                          • Systems with widely varying operating conditions
                            
                            • Capacity ranges from 1/8 to 8 ton R-22
                              
                              • Supermarket cases and rack systems, Food and Beverage units
                                
                                • Air Conditioning  Residential, Commercial, Chillers
                                  
                                  • Transportation  Units on Truck/Trailer, Bus and Vans