Lead free solder widely used in plumbing applications where lead-bearing solders are prohibited. Contains nickel, making joints tremendously strong. Wide range makes bridgit an excellent alloy for large diameter fittings and ill-fitted or non-concentric pipes. Fills gaps and caps off easily and effectively.

Sid Harvey Item #:T720: Replaces Part #:'s : 15204,
,

Mueller Copper W11-59

Harris 95561 Lead Free Solder, 1/8", 1 lb Spool

• Tin-antimony solder well suited for applications where moderately elevated temperature is a factor
• With higher electrical conductivity and high fluidity, 95/5 is recommended for lead free installation of small diameter, tight fitting connections
• Not recommended for use on brass or HVAC connections
• 95 - 5 tin/antimony solder is a low temperature lead free solder with a narrow melting range
• The rapid melting characteristics require close fitting connections as it is difficult bridge or fill wide clearance

Sid Harvey Item #:T720-6: Replaces Part #:'s : 15202,
,

Lucas-Milhaupt Sil-Fos Silvabrite 100 56761 Solder, 1/8", 440 deg F, 1 lb Spool

• Silver-bearing solder with good strength used in potable water system applications requiring no lead
• Flow point 660 deg F Lucas-Milhaupt Sil-Fos Silvabrite 100 56761 Solder, 1/8", 440 deg F, 1 lb SpoolSid Harvey Item #:SB100: Replaces Part #:'s : 15206,
  ,
  
  

With some exceptions, these tin-lead solders can be used to join copper and most copper alloys, lead, nickel alloys and steel. Tin-lead solders are not recommended for joints subject to high stress or vibration in the cooling industry due to lack of sufficient elongation properties. These solders are also available with rosin or acid core.

• It is illeGallon to use lead solders in both public and private potable water systems
• Lead-bearing solders are not to be used in potable water systems
• 360 deg F solidus
• Black color

Sid Harvey Item #:T720-5: Replaces Part #:'s : 15200,

,

Mueller Copper W11-79

Utility Enterprises 14-220 Soldering Flux, 16 oz, Tan, 24/Case

• Self cleaning
• Lead free flux specially formulated for sweat fitting work
• Makes solder flow freely and tin perfectly, recommended for all soft solder work, including 95/5
• Removes oxidation and prepares copper, lead, brass, tin, stainless steel, cast and wrought iron for the proper bonding of solder to metal assuring leak-tight joints

,
,

Harris T720-53 Soldering Flux 32 oz Bottle,
,

Harris T720-53

Harris T720-50 A general purpose zinc chloride flux for soldering with all soft solders use with tin-lead solder, tin-antimony solder, Stay-Brite solder.

• Not recommended for use in electrical or electronic applications
• Fumes and gases and vapors can be hazardous to your health
• Flux is corrosive, may be harmful or fatal if inhaled or swallowed
• Flux causes skin and eye burns
• Do not taste or swallow
• Keep out of the reach of children
• Heat rays, (infrared radiation) from flame or hot metal can injure eyes

Sid Harvey Item #:T720-50: Replaces Part #:'s : 14951,
,

Mueller Copper W11-80

Designed primarily for copper to copper and copper to brass connections the paste form is ideal for soldering tube joints. Not recommended for electrical or electronic applications due to the potential corrosive residue of the flux. Stay Clean paste flux works well with most leaded and lead-free solder compositions. Flux residue should be removed after soldering.

Sid Harvey Item #:T720-25A: Replaces Part #:'s : 14954,
,

Mueller Copper W11-78

Utility Enterprises The original self cleaning, lead free flux specially formulated for sweat fitting work. It removes oxidation and prepares copper, lead, brass, tin, stainless steel, cast and wrought iron for the proper bonding of solder to metal assuring leak-tight joints. It makes the solder flow freely and tin perfectly. It's recommended for all soft solder work, including 95/5. Meets federal specification 0-F-506.

,
,

Utility Enterprises 14-216

High Side HS30004 Solderlene Acid Free Flux 4 oz W/Brush,
,

Harris 6620F1 Solder Stick 18" x 28" SS6050X,
,

Both Stay Brite and Stay Brite 8 produce an overall component with greater strength than a brazed component whose base metals are weakened by annealment from high brazing heat. Stay Brite solders bond with all of the ferrous and nonferrous alloys. Joints soldered with Stay Brite solders exhibit considerably higher than necessary elongation for sound, dissimilar metal joints and vibration applications.

Sid Harvey Item #:T720-12: Replaces Part #:'s : 15207,
,

Harris T720-12