Oatey 30753 Primer, 32 oz, Clear, 12/Pack

• Clear aggressive primer
• Low VOC solvent cement meets california south coast air quality management district (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
• Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld

,
,

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

Bramec TAA1616 Nylon Male Barb Adapter 1/2" MPT x 1/2" Barb Nylon Male Barb Adapter 1/2" MPT x 1/2" Barb

Oatey 60490 PVC Purple PVC Primer 32 oz

RectorSeal Hi-Temp 100% RTV silicone caulk is a one component caulk which cures to a strong durable resilient rubber. It will adhere to glass, clean metal, most types of non-oily woods, vulcanized silicone rubber, silicone resins, natural and synthetic fibers, ceramic, paper, as well as many painted and plastic surfaces.

• Vibration resistant
• Remains flexible
• Insulates
• Silicone caulk is to bonds
• 1 year minimum shelf life

Sid Harvey Item #:J14-3: Replaces Part #:'s : 4554,
,

RectorSeal J14-3

Boss 326 Hi-temp Red Silicone Sealant is a one-part, nonslumping paste that cures to a tough, rubbery solid at room temperature on exposure to water vapor in the air. This silicone product was formulated to perform at temperatures ranging from -40 to 500 deg F. It can be used for numerous sealing and bonding applications.,
,

Bramec 15153 Cloth Shop Towel, 25/bag, 18 Inch L x 18 Inch W, Red

• Pre washed
• Hemmed edges
• 25/bag

Mars 79027 Red Shop Towels 50/PK,
,

Mars One-Shot is all it takes to instantly clear clogs. MARS One-Shot drain opener kit instantly clears blockages in all types of fixtures and drains while simultaneously delivering a specially designed enzyme ingredient. This enzyme continues to dissolve grease build-up in the drain long after the initial blockage was cleared. The kit includes: One-Shot drain opener can 7 oz., three foot extension hose and twist fit adapter for ice markers and condensate drain pans.

• Enzyme activated
• No ozone depleting chemicals
• Safe for sewers and septic systems
• Works instantly
• Sanitary and easy to use
• Universal adapter for all types of fixtures
• Seamless aluminum container will not rust
• For drains from 3/8 in ID to 7/8 ID
• 12 applications per can
• 0.15 g/L at 20 deg C solubility in water

,
,

Nu-Calgon 4050-01 A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The A/C EasySeal circulates through the system with the refrigerant seeking out leaks rather than migrating slowly with the oil keeping in mind that only a small portion of the system oil actually migrates with the refrigerant through the system. A/C EasySeal will react with moisture or air that is naturally present at a leak, forming a secure seal. A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal. A/C EasySeal is a time saver. It finds leaks quickly and seals them, saving the time and money required in searching for the smallest leaks. With A/C EasySeal, the contractor is able to just add a can to the system and be confident the leak has been fixed and move on to the next job.

• Treats fractional to 1.5 Ton
• Prevents refrigerant leaks and seals existing leaks in air conditioning and refrigeration systems permanently
• Eliminates expensive leak search and repair
• Travels with refrigerant to find leaks fast
• Utilizes a reusable hose

,
,

Nu-Calgon 4050-06 EasySeal Refrigerant Leak Sealant, 3 oz Pressurized Can, A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The A/C EasySeal circulates through the system with the refrigerant seeking out leaks rather than migrating slowly with the oil keeping in mind that only a small portion of the system oil actually migrates with the refrigerant through the system. A/C EasySeal will react with moisture or air that is naturally present at a leak, forming a secure seal. A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal. A/C EasySeal is a time saver. It finds leaks quickly and seals them, saving the time and money required in searching for the smallest leaks. With A/C EasySeal, the contractor is able to just add a can to the system and be confident the leak has been fixed and move on to the next job.Sid Harvey Item #:4050-06: Replaces Part #:'s : 39783,
,

Nu-Calgon 4050-02 A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The A/C EasySeal circulates through the system with the refrigerant seeking out leaks rather than migrating slowly with the oil keeping in mind that only a small portion of the system oil actually migrates with the refrigerant through the system. A/C EasySeal will react with moisture or air that is naturally present at a leak, forming a secure seal. A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal. A/C EasySeal is a time saver. It finds leaks quickly and seals them, saving the time and money required in searching for the smallest leaks. With A/C EasySeal, the contractor is able to just add a can to the system and be confident the leak has been fixed and move on to the next job.Sid Harvey Item #:4050-02: Replaces Part #:'s : 39782,
,

Nu-Calgon 4303-07 All viscosities are manufactured by Calumet Lubricant Co. and are approved by Copeland, Trane and other compressor manufacturers, approvals varying by viscosity. They are specifically designed for today's high performance air conditioning and refrigeration compressors. These modern compressors run at higher speeds and generate higher temperatures and they need better lubrication. Use of C-3s, C-4s, and C-5s mineral oil will insure continued efficient system operation, providing the important properties required from a good refrigeration oil. Nu-Calgon mineral oils combine excellent solubility and stability with good floc and pour points to provide excellent low temperature performance.

• Recommended by OEM's for use with CFC's and HCFC's
• Approved by OEM's including Copeland, Carlyle, etc.
• C-3s is approved replacement for 3GS

Sid Harvey Item #:4303-07: Replaces Part #:'s : F49,
,

Nu-Calgon 4303-07