Nu-Calgon 4168-08 Evap Pow'r is a"no-rinse" product formulated for cleaning indoor evaporator coils. The green-colored, slightly alkaline liquid is metal-safe and therefore will not harm the coil's metal surfaces when left in contact with them even in a no-rinse application. It cleans and emulsifies the most stubborn soils and deposits, and is biodegradable as wellas USDA-Authorized.

Nu-Calgon 4168-05 Evap-Power Evaporator Cleaner 2.5 Gallon,
,

Nu-Calgon 4127-75 Blackhawk is an expanding foam, non-fragrance coil cleaner for HVAC/R applications. The product's expanding foam permeates deep within the coil then liquefies to quickly remove grease, grime, and other oily surfaces. Blackhawk's heavy-duty formulation is powerful, yet safe and problem-free in food processing areas - produces no objectionable fumes. Blackhawk is a specially formulated expanding foam evaporator and condenser coil cleaner that is safe in and around food processing areas. Product can be used as a non-rinse for evaporator applications since the condensate will rinse off the coil. Blackhawk is suitable to clean washable filters, exhaust hoods and other metal surfaces.

• An expanding foam, non-fragrance coil cleaner
• Safe for cleaning HVAC/R coils in food processing areas
• Does not produce objectionable fumes
• Metal/plastic safe
• Non-rinse for evaporators
• Non-flammable
• Biodegradable
• Sprays from any angle
• Can be used with talon aerosol wand (4776-0)

,
,

Nu-Calgon 4127-75

Nu-Calgon 4293-75 Nu-Foam is an expanding, polyurethane, prepolymer foam that is used as a sealant and an insulating product. It is designed to seal, fill and insulate small cracks, gaps and voids. Tack free time for Nu-Foam is less than 3 minutes at 7 deg F and 4-5% relative humidity. Its R-Value is 4.9 per" thick making a very good insulator in most any application and can even provide sound-deadening. Nu-Foam is UL classified and is fire retardant. Can withstand temperatures up to 24 deg F. It can be used to seal and insulate areas such as openings created for refrigeration, air conditioning and heating tubes or pipes, duct joints, utility penetrations in exterior sheeting, masonry, concrete or wood walls, and other areas where unwanted air penetration might occur.

• Yields 352 linear feet (medium can) and 78 linear feet (large can) of 3/8" bead
• Tack-free in 3 min and dries in 4 hr
• Insulates against heat loss and heat gain
• Fire retardant
• Two years shelf life
• No CFC's, no HCFC's

Ridgid 22088 Extreme Performance Thread Cutting Oil 0.1Gallon Aerosol Can,
,

Spectronics RP-EZ-25 EZ Inject Hose Assembly 8",
,

General Filters E-Z LID EZ-Lid Bucket Lid

Fernox 57882 F3 Cleaner,
,

Cliplight Super Change is the fast and easy way to complete an R22 system retrofit. It creates a strong compatibility link between all oils to any HFC refrigerants, including POE-based R407C and R410A - eliminating compressor downtime and line set flush. It boosts efficiency plus extends compressor life by maximizing heat transfer and oil return with drop-in refrigerants. Ideal for dry charge units, retrofits and drop-in refrigerants. One can treats systems up to 6 Ton.

Emerson-Swan 62436 Fernox F1 Protector Inhibitor Treats 26 Gallons Express Can

Polymer Adhesives Sealant Systems Airseal 33 AS33-T-G Fiber Reinforced Water Based Duct Sealant, 10.5 oz Tube, Gray

• Fast dry time
• High solids content
• Has excellent mold and mildew resistant
• Seals high pressure HVAC duct systems, metal, fiberglass, duct board and flex duct, all joints, seams and penetration in duct work
• 18 months in unopened container shelf life

,
,

Polymer Adhesives Sealant Systems CADS-1 Fiber Reinforced Water Based Duct Sealant, 1 Gallon, Gray

• Fiber reinforced for additional strength
• Rated for high velocity HVAC systems
• Excellent mold and mildew resistance
• CADS may be used to seal all types of HVAC duct systems including metal, fiberglass, duct board and flex duct
• 18 months in unopened container shelf life

,
,