|◀ 277 - 288 of 841 ▶|
View:
Nu-Calgon 4314-46 The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with base fluids that are specifically formulated to deliver optimum performance with minimal additive levels.Sid Harvey Item #:4314-46: Replaces Part #:'s : B81-406,
,


Item#:
4314-46
Manufacturer Item:
4314-46
Manufacturer:
NU-CALGON
Nu-Calgon 4316-46 Emkarate Refrigeration Lubricant, 1 Gallon Can, Mild, The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with base fluids that are specifically formulated to deliver optimum performance with minimal additive levels. The requirements of today's refrigeration and air conditioning compressor lubricants are complex. They must be compatible and miscible with the HFC refrigerants, and they must be compatible and miscible with CFC's and HCFC's as well as mineral and alkylbenzene oils. Polyol ester lubricants meet these needs, and the EMKARATE RL line is the preferred choice. Working in close collaboration with compressor and system manufacturers, these OEM-approved POE lubricants cover a wide viscosity range from 7 cSt (35-40 SUS) to 220 cSt (1100 SUS) to suit most applications. The lubricants have excellent thermal and chemical stability, and are compatible with a wide range of elastomers, polymeric materials and other materials of construction. Additionally, then higher viscosity index is an indication that their effective viscosity will not change drastically with the wide swings in temperature seen by most typical refrigeration and air conditioning systems. They are the preferred choice for servicing and retrofitting existing equipment as well as for OEM charging.,
,

Item#:
4316-46
Manufacturer Item:
4316-46
Manufacturer:
NU-CALGON
Mitco TIP & POUR Empty Bottle & Caps,
,

Item#:
TIP & POUR
Manufacturer Item:
TIP & POUR
Manufacturer:
MITCO MFG.
Sid Harvey F1-39C Empty Spray Bottle 16 oz,
,

Item#:
F1-39C
Manufacturer Item:
F1-39C
Manufacturer:
MITCO MFG.
Sid Harvey F1-39B Empty Spray Bottle 1 Quart,
,


Sid Harvey F1-39B

Item#:
F1-39B
Manufacturer Item:
F1-39B
Manufacturer:
MITCO MFG.
Nu-Calgon 4126-38 Bio-Fresh cd 4126-38 Bacteriastat Deodorizer, 1 Gallon Bottle, Bio-fresh cd is a ready-to-use bacteriostat, fungistat and deodorizer based upon chlorine dioxide technology. It is recommended for control of bacteria, mold, mildew, fungi and yeast in IAQ applications. Its EPA registration includes application in HVACR ventilating equipment, including coils, condensate pans, filters and duct-work.Sid Harvey Item #:4126-38: Replaces Part #:'s : 6R313A,
,


Nu-Calgon 4126-38

Item#:
4126-38
Manufacturer Item:
4126-38
Manufacturer:
NU-CALGON
Diversitech JB8265 Epox-A-Leak Epoxy 2 Part System
  • J-B Weld JB8265 2-Part Steel Reinforced Epoxy Resin and Hardener, 1 oz The worlds finest cold-weld compound for use when welding or soldering is out of the question due to cost, down time for repairs or technical or environmental considerations. A remarkably easy, convenient and inexpensive alternative to welding, soldering, and brazing. Literally pennies per use.,
    ,

  • Item#:
    JB8265
    Manufacturer Item:
    8265-S
    Manufacturer:
    DIVERSITECH CORP.
    RectorSeal EP-200 is a pre-measured, high grade epoxy and hardener formulated together in one stick, making it easy to break off the amount needed for each repair. RectorSeal epoxy putty bonds to most surfaces and hardens in 15 to 20 min. It can then be sanded, painted, drilled, taped and machined.
    • Pressure tested to 1300 psi
    • Can even harden under water
    • Contains no asbestos
    • No special tools required
    • Permanent repair
    • Premeasured resin and hardener in 1 tube
    • Used to bond, seal, plug, mold and rebuild
    ,
    ,

    Item#:
    EP200
    Manufacturer Item:
    97601
    Manufacturer:
    RECTORSEAL - HOUSTON
    RectorSeal EP400 Epoxy Putty Tube 4 oz Gray/White/Bronze 1.9 Specific Gravity,
    ,

    Item#:
    EP400
    Manufacturer Item:
    97606
    Manufacturer:
    RECTORSEAL - HOUSTON
    Nu-Calgon 4171-75 Evap Foam"no rinse" is a high performance, heavy duty detergent, specifically formulated with special surfactants and alkaline cleaners that have been developed into a foaming, no-rinse product. The aerosol product can be sprayed either right side up or upside down, and is ideal for use on most coils, but particularly suited for cooling or evaporator coils.
    Item#:
    4171-75
    Manufacturer Item:
    4171-75
    Manufacturer:
    NU-CALGON
    Nu-Calgon 4166-75 Evap-Fresh no rinse is a ready-to-use, non-abrasive, 1-step cleaner and disinfectant for evaporator coils in small air conditioners, commercial air handling equipment, HVAC cooling coils and refrigeration equipment. It is the first product of its kind in the industry to receive EPA registration for such claims. For hard to reach areas, use in conjuntion with 27" talon flexible spray wand.
    • Evap-fresh has been tested effective via AOAC methodology against a wide variety of organisms: salmonella typhi, yersinia enterocolitica, enterococcus faecium, corynebacterium ammoniagenes, methicillin resistant staphylococcus aureus (MRSA), vancomycin resistant enterococcus faecalis, methicillin resistant staphylococcus epidermidis, vancomycin intermediate resistant staphylococcus aureus, pseudomonas aeruginosa, staphylococcus aureus, salmonella choleraesuis, escherichia coli, streptococcus pyogene, listeria monocytogenes
    • Cleans and deodorizes in one easy step
    • EPA registered for the HVAC application
    • Ready to use disinfectant formulation
    • No rinsing required
    • Eliminates odors
    • Cuts dirt and grime
    • Can be used with talon (4776-0)
    Sid Harvey Item #:4166-75: Replaces Part #:'s : 35064,
    ,


    Nu-Calgon 4166-75

    Item#:
    4166-75
    Manufacturer Item:
    4166-75
    Manufacturer:
    NU-CALGON
    Nu-Calgon 4191-08 Evap-Green No Rinse Coil Cleaner, 1 Gallon Bottle, Clear Nu-Calgon's Evap-Green is specially formulated for cleaning all aluminum constructed evaporators, including the latest microchannel designs in the HVAC/R market. Also, Evap-Green is ideal for cleaning traditional copper tube/aluminum fin designed heat exchangers. Besides being formulated to meet OEM guidelines for all aluminum constructed coils, Evap-Green is part of Nu-Calgon's Green Select program since it utilizes ingredients that are safer choices as approved by the EPA under the safer choice direct release program. The coil cleaner has been extensively tested to provide performance while using ingredients that have an excellent eco-profile. Evap-Green performs well and is safer for people and the environment.Sid Harvey Item #:4191-08: Replaces Part #:'s : 37940,
    Item#:
    4191-08
    Manufacturer Item:
    4191-08
    Manufacturer:
    NU-CALGON
    |◀ 277 - 288 of 841 ▶|
    View: