Brand Name
Type
Material
Application
Length
Color
|◀ ◀ 277 - 288 of 484 ▶ ▶|
View:

Threaded Rod 3/8" x 6' (Zinc Plated)

Duro Dyne TR38x6FT Threaded Rod 3/8" x 6' (Zinc Plated)
Zinc Plated 3/8" Threaded Rod 6ft. Hanging ductwork, equipment, wiring trays or other building components requires secure structural assemblies. These assemblies are comprised of support members attached to building anchor points with fasteners. The support members are often lengths of strut or angle iron. The fastener frequently is threaded rod combined with washers and nuts. Duro Dyne stocks Zinc plated threaded rod in five diameters and in lengths of 6 feet, 10 feet and 12 feet. The rod is shipped in sturdy cardboard tubes.
    Zinc plated
  • Low carbon steel meeting the minimum requirements of ASTM A307, grade A
  • 60,000 PSI Tensile Strength
  • 16 threads per"

    Duro Dyne TR38X6FT

Item#:
TR38X6FT
Manufacturer Item:
TR38ZP06
Manufacturer:
DURO DYNE CORP

Threaded Rod 3/8" x 10'

Edwards & West TR38X10FT Threaded Rod 3/8" x 6',

Century Brass W40-3

Item#:
TR38X10FT
Manufacturer Item:
37C12000RAT2Z
Manufacturer:
EDWARDS & WEST,INC T/A DIVSPEC
 
TR38X10FT_Spec

Cushion Clamp 2-1/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    Warren Technology WHE0802BX

    • Item#:
    UX21834
    Manufacturer Item:
    UX21834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX21834_Broc

    Copper Coated 2-Hole Tubing Clip 1"

    Warwick Hanger 100-10 Copper Plating Carbon Steel 2-Hole Tubing Clip, 1"
      Our copper plated tubing clips are designed to snap onto the tubing for hands free nailing

      Cello WP7LT-10

    Item#:
    W100-10
    Manufacturer Item:
    100-10
    Manufacturer:
    WARWICK HANGER COMPANY
     
    Warwick-Hanger_Broc

    3-Hole Conduit Hanger 1/4" 50 lb.

    Sunrise Electric Supply 0B Silver Zinc-Plated Low Carbon Cold Rolled Steel 3-Hole,

    Sunrise Electric 0-B

    Item#:
    0-B
    Manufacturer Item:
    0-B
    Manufacturer:
    ELECTRICAL PARTS & FITTINGS

    Adjustable Swivel Ring Hanger 1/2"- 1" Suspension Of Non-Insulated Stationary Copper Tube

    Anvil International 0500301692 Adjustable Swivel Ring Hanger 1/2"- 1"
    Material: Carbon steel
  • Finish: Strap is Pre-Galvanized Zinc Material. Nut is Zinc Plated.
  • Service: Recommended for suspension of non-insulated stationary pipe line.
  • Maximum Temperature: 650° F
  • Approvals: Complies with Federal Specification A-A-1192A (Type 10), WW-H-171-E (Type 10),
  • ANSI/MSS SP-69 and MSS SP-58 (Type 10). UL Listed and FM Approved (Sizes 3 4" - 8"). Features:
  • Threads are countersunk so that they cannot become burred or damaged.
  • Knurled swivel nut provides vertical adjustment after piping is in place.
  • Captured swivel nut in the 12" through 6" sizes. The capture is permanent in the bottom portion of the band, allowing the hanger to be opened during installation if desired, but not allowing the nut to fall completely out.,

    Anvil 0500301692

    • Item#:
    0500301692
    Manufacturer Item:
    0500301692
    Manufacturer:
    ANVIL INTERNATIONAL LP
     
    0500301692

    Adjustable Swivel Ring Hanger 1-1/2" Suspension Of Non-Insulated Stationary Copper Tube

    Anvil International 0500406947 Adjustable Swivel Ring Hanger 1-1/2"
    Material: Carbon steel
  • Finish: Strap is Pre-Galvanized Zinc Material. Nut is Zinc Plated.
  • Service: Recommended for suspension of non-insulated stationary pipe line.
  • Maximum Temperature: 650° F
  • Approvals: Complies with Federal Specification A-A-1192A (Type 10), WW-H-171-E (Type 10),
  • ANSI/MSS SP-69 and MSS SP-58 (Type 10). UL Listed and FM Approved (Sizes 3 4" - 8"). Features:
  • Threads are countersunk so that they cannot become burred or damaged.
  • Knurled swivel nut provides vertical adjustment after piping is in place.
  • Captured swivel nut in the 12" through 6" sizes. The capture is permanent in the bottom portion of the band, allowing the hanger to be opened during installation if desired, but not allowing the nut to fall completely out.,

    Anvil 0500406947

    • Item#:
    0500406947
    Manufacturer Item:
    0500406947
    Manufacturer:
    ANVIL INTERNATIONAL LP
     
    0500406947

    Adjustable Swivel Ring Hanger 2" Suspension Of Non-Insulated Stationary Copper Tube

    Anvil International 0500301759 Adjustable Swivel Ring Hanger 2"
    Material: Carbon steel
  • Finish: Strap is Pre-Galvanized Zinc Material. Nut is Zinc Plated.
  • Service: Recommended for suspension of non-insulated stationary pipe line.
  • Maximum Temperature: 650° F
  • Approvals: Complies with Federal Specification A-A-1192A (Type 10), WW-H-171-E (Type 10),
  • ANSI/MSS SP-69 and MSS SP-58 (Type 10). UL Listed and FM Approved (Sizes 3 4" - 8"). Features:
  • Threads are countersunk so that they cannot become burred or damaged.
  • Knurled swivel nut provides vertical adjustment after piping is in place.
  • Captured swivel nut in the 12" through 6" sizes. The capture is permanent in the bottom portion of the band, allowing the hanger to be opened during installation if desired, but not allowing the nut to fall completely out.,

    Anvil 0500301759

    • Item#:
    0500301759
    Manufacturer Item:
    0500301759
    Manufacturer:
    ANVIL INTERNATIONAL LP
     
    0500301759

    Adjustable Swivel Ring Hanger 1-1/2" Suspension Of Non-Insulated Stationary Copper Tube

    Anvil International 0500301742 Adjustable Swivel Ring Hanger 1-1/2"
    Material: Carbon steel
  • Finish: Strap is Pre-Galvanized Zinc Material. Nut is Zinc Plated.
  • Service: Recommended for suspension of non-insulated stationary pipe line.
  • Maximum Temperature: 650° F
  • Approvals: Complies with Federal Specification A-A-1192A (Type 10), WW-H-171-E (Type 10),
  • ANSI/MSS SP-69 and MSS SP-58 (Type 10). UL Listed and FM Approved (Sizes 3 4" - 8"). Features:
  • Threads are countersunk so that they cannot become burred or damaged.
  • Knurled swivel nut provides vertical adjustment after piping is in place.
  • Captured swivel nut in the 12" through 6" sizes. The capture is permanent in the bottom portion of the band, allowing the hanger to be opened during installation if desired, but not allowing the nut to fall completely out.,

    Anvil 0500301742

    • Item#:
    0500301742
    Manufacturer Item:
    0500301742
    Manufacturer:
    ANVIL INTERNATIONAL LP
     
    0500301742

    Adjustable Swivel Ring Hanger 4" Suspension Of Non-Insulated Stationary Copper Tube

    Anvil International 0500301809 Adjustable Swivel Ring Hanger 4"
    Material: Carbon steel
  • Finish: Strap is Pre-Galvanized Zinc Material. Nut is Zinc Plated.
  • Service: Recommended for suspension of non-insulated stationary pipe line.
  • Maximum Temperature: 650° F
  • Approvals: Complies with Federal Specification A-A-1192A (Type 10), WW-H-171-E (Type 10),
  • ANSI/MSS SP-69 and MSS SP-58 (Type 10). UL Listed and FM Approved (Sizes 3 4" - 8"). Features:
  • Threads are countersunk so that they cannot become burred or damaged.
  • Knurled swivel nut provides vertical adjustment after piping is in place.
  • Captured swivel nut in the 12" through 6" sizes. The capture is permanent in the bottom portion of the band, allowing the hanger to be opened during installation if desired, but not allowing the nut to fall completely out.,

    Anvil 0500301809

    • Item#:
    0500301809
    Manufacturer Item:
    0500301809
    Manufacturer:
    ANVIL INTERNATIONAL LP
     
    0500301809

    Adjustable Swivel Ring Hanger 1-1/4" Suspension Of Non-Insulated Stationary Copper Tube

    Anvil International 0500301734 Adjustable Swivel Ring Hanger 1-1/4"
    Material: Carbon steel
  • Finish: Strap is Pre-Galvanized Zinc Material. Nut is Zinc Plated.
  • Service: Recommended for suspension of non-insulated stationary pipe line.
  • Maximum Temperature: 650° F
  • Approvals: Complies with Federal Specification A-A-1192A (Type 10), WW-H-171-E (Type 10),
  • ANSI/MSS SP-69 and MSS SP-58 (Type 10). UL Listed and FM Approved (Sizes 3 4" - 8"). Features:
  • Threads are countersunk so that they cannot become burred or damaged.
  • Knurled swivel nut provides vertical adjustment after piping is in place.
  • Captured swivel nut in the 12" through 6" sizes. The capture is permanent in the bottom portion of the band, allowing the hanger to be opened during installation if desired, but not allowing the nut to fall completely out.,

    Anvil 0500301734

    • Item#:
    0500301734
    Manufacturer Item:
    0500301734
    Manufacturer:
    ANVIL INTERNATIONAL LP
     
    0500301734

    Adjustable Swivel Ring Hanger 1/2" x 1-1/4" Suspension Of Non-Insulated Stationary Copper Tube

    Anvil International 0500406889 Adjustable Swivel Ring Hanger 1/2" x 1-1/4"
    Material: Carbon steel
  • Finish: Strap is Pre-Galvanized Zinc Material. Nut is Zinc Plated.
  • Service: Recommended for suspension of non-insulated stationary pipe line.
  • Maximum Temperature: 650° F
  • Approvals: Complies with Federal Specification A-A-1192A (Type 10), WW-H-171-E (Type 10),
  • ANSI/MSS SP-69 and MSS SP-58 (Type 10). UL Listed and FM Approved (Sizes 3 4" - 8"). Features:
  • Threads are countersunk so that they cannot become burred or damaged.
  • Knurled swivel nut provides vertical adjustment after piping is in place.
  • Captured swivel nut in the 12" through 6" sizes. The capture is permanent in the bottom portion of the band, allowing the hanger to be opened during installation if desired, but not allowing the nut to fall completely out.,

    Anvil 0500406889

    • Item#:
    0500406889
    Manufacturer Item:
    0500406889
    Manufacturer:
    ANVIL INTERNATIONAL LP
     
    0500406889
    |◀ ◀ 277 - 288 of 484 ▶ ▶|
    View: