Armacell BST21834 Pipe Insulation with Lap Seal 2-1/8" x 3/4" x 6' Microban Antimicrobial, Closed-Cell Foam Polyethylene foam pipe insulation. Its closed cell structure won't wick moisture and helps prevent the absorption of condensation that could cause mold to develop over time. Imcoa SS has an easy to install self seal closure system. Imcoa pipe insulation is semi-slit, and can be completely slit by hand. Imcoa SS is pre-slit with a factory applied pressure sensitive adhesive (PSA) to both seam surfaces and has a release liner for easy installation. All butt joints should be properly sealed. Imcoa and Imcoa SS are easy to cut with a knife and can be fabricated to go around p-traps and fittings.

• CFC/HCFC free
• Non-porous
• Low VOCs
• Halogen free
• Fiber free
• Resistant to mold growth

,
,

Armacell BST21834

K-Flex Pipe Insulation
2-1/8" X 3/4" X 6'

K-Flex J3-9

The original, Fiber-Free, Flexible Elastomeric Pipe Insulation For Reliable Protection Against Condensation, Mold and Energy Loss. AP Armaflex is the Ideal Insulation Material For Hvac & Refrigeration Systems In Environments Where The Highest Levels Of Condensation Control and Indoor Air Quality Are Required.

Fiber-Free, Formaldehyde-Free, Low Voc and Non-Particulating Formulation

Protects Indoor Air Quality

Closed-Cell Structure Provides Excellent Condensation Control

Built-In Vapor Retardant Barrier Eliminates Need For Additional Vapor Retarder

Microban Antimicrobial Product Protection Provides Exceptional Mold Resistance

25/50 Rated For Use In Air Plenums Up To 2" Wall

Armacell APT21834

White Pipe Insulation is a Fiber-Free, Flexible Elastomeric Pipe Insulation Designed for Reliable Protection against Condensation and Energy Loss. Typical Applications Include Piping for HVAC and Refrigeration Systems, VRV and VRF Systems, Chillers, as well as Hot and Cold Water Plumbing Systems

K-Flex J1-9 Pipe Insulation 2-1/8" x 3/8" x 6' K-Flex Insul-Tube is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes
• <7% linear shrinkage dimensional stability
• <0.01 perm" water vapor permeability
  
  
  

  K-Flex J1-9

Maples Sales & Service J2-43 Pipe Insulation 2-5/8" 1/2" x 6' Maples Sales & Service is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes
• <7% linear shrinkage dimensional stability
• <0.01 perm" water vapor permeability,
  ,
  
  

K-Flex 6Rx148258 Pipe Insulation 2-5/8" x 1-1/2" x 6' Black Un-Split K-Flex Insul tube is a flexible, closed cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes

,
,

Armacell

Black and White Tube Insulation

The original, fiber-free, flexible elastomeric pipe insulation for reliable protection against condensation and energy loss.

Fiber-free, formaldehyde-free, low VOC and non-particulating formulation protects indoor air quality

Closed-cell structure provides excellent condensation control

Built-in vapor barrier eliminates need for additional vapor retarder

Armacell APT25812

K-Flex J2-10 Pipe Insulation 2-5/8'" x 1/2" x 6' K-Flex Insul-Tube is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes
• <7% linear shrinkage dimensional stability
• <0.01 perm" water vapor permeability,
  ,
  
  
  

  K-Flex J2-10

K-Flex J4-10 Pipe Insulation 2-5/8" x 1" x 6' K-Flex Insul-Tube is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes
• <7% linear shrinkage dimensional stability
• <0.01 perm" water vapor permeability
  
  
  

  K-Flex J4-10