Tube and Sheet Insulation is a highly flexible, closed-cell and lightweight EPDM-rubber based elastomeric product. Aerocel Tube and Sheet Insulation is designed for insulating warm or cold piping, duct, or equipment. Aerocel EPDM Elastomeric Tube and Sheet Insulation is supplied in 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2" 2", 2-1/2" and 3" thicknesses, in popular I.D. sizes up to 8" IPS, and as flat sheets and rolls. Please check for specific size combinations. The tightly formed, closed-cell structure of Aerocel Pipe and Sheet Insulation makes it an efficient insulation, providing superior insulating capacity to many materials, including other elastomeric insulations. Aerocel is manufactured to consistently provide actual values on these key performance criteria for mechanical system insulation

Aeroflex REF589-AC25834WG

K-Flex J3-10 Pipe Insulation 2-5/8" x 3/4" x 6' K-Flex Insul-Tube is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes
• <7% linear shrinkage dimensional stability
• <0.01 perm" water vapor permeability
  
  
  

  K-Flex J3-10

The original, Fiber-Free, Flexible Elastomeric Pipe Insulation For Reliable Protection Against Condensation, Mold and Energy Loss. AP Armaflex is the Ideal Insulation Material For Hvac & Refrigeration Systems In Environments Where The Highest Levels Of Condensation Control and Indoor Air Quality Are Required.

Fiber-Free, Formaldehyde-Free, Low Voc and Non-Particulating Formulation

Protects Indoor Air Quality

Closed-Cell Structure Provides Excellent Condensation Control

Built-In Vapor Retardant Barrier Eliminates Need For Additional Vapor Retarder

Microban Antimicrobial Product Protection Provides Exceptional Mold Resistance

25/50 Rated For Use In Air Plenums Up To 2" Wall

White Pipe Insulation is a Fiber-Free, Flexible Elastomeric Pipe Insulation Designed for Reliable Protection against Condensation and Energy Loss. Typical Applications Include Piping for HVAC and Refrigeration Systems, VRV and VRF Systems, Chillers, as well as Hot and Cold Water Plumbing Systems

Armacell

Black and White Tube Insulation

The original, fiber-free, flexible elastomeric pipe insulation for reliable protection against condensation and energy loss.

Fiber-free, formaldehyde-free, low VOC and non-particulating formulation protects indoor air quality

Closed-cell structure provides excellent condensation control

Built-in vapor barrier eliminates need for additional vapor retarder

Armacell APT31812

K-Flex Insul-Tube is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes
• <7% linear shrinkage dimensional stability
• <0.01 perm" water vapor permeability
  
  

K-Flex 6Rx100318 Pipe Insulation 3-1/8" x 1" x 6' Black Un-Split K-Flex Insul tube is a flexible, closed cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes

White Pipe Insulation is a Fiber-Free, Flexible Elastomeric Pipe Insulation Designed for Reliable Protection against Condensation and Energy Loss. Typical Applications Include Piping for HVAC and Refrigeration Systems, VRV and VRF Systems, Chillers, as well as Hot and Cold Water Plumbing Systems

Armacell

Black and White Tube Insulation

The original, fiber-free, flexible elastomeric pipe insulation for reliable protection against condensation and energy loss.

Fiber-free, formaldehyde-free, low VOC and non-particulating formulation protects indoor air quality

Closed-cell structure provides excellent condensation control

Built-in vapor barrier eliminates need for additional vapor retarder

K-Flex J3-11 Pipe Insulation 3-1/8" x 3/4" x 6' K-Flex Insul-Tube is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes
• <7% linear shrinkage dimensional stability
• <0.01 perm" water vapor permeability
  
  
  

  K-Flex J3-11