|◀ 73 - 84 of 202 ▶|
View:
Bock Water Heaters SideKick 40SK Powder Coated Steel Indirect Water Heater, 38 Gallon, 8 gpm, 89000 BTU
  • Single-wall full throat 1-1/2" diameter internal coil heat exchanger
  • Factory installed aquastat on all models
  • Factory installed temperature and pressure relief valve and brass drain valve
  • Robust construction - inner tank is precision built from high quality steel and repetitive pressure testing assures the highest quality
  • All steel construction with an environmentally-friendly powder coat finish providing a tough and attractive exterior
  • Cobalt-enriched porcelain enamel glass lined tank and coil are highly resistant to aggressive water not susceptible to damage due to the presence of chloride in the water
  • Ecomate insulation does not contribute to global warming
  • Two magnesium anode rods - inhibit corrosion and maximize tank life. Electrolysis attacks the anode rods, not the tank
  • Factory installed dielectric nipples on boiler connections - provides greater insulating protection
,
,



bock water heaters 40sk

Item#:
40SK
Manufacturer Item:
BOCK
Manufacturer:
BOCK WATER HEATERS
Therma-Flow S50GL Glass Lined Steel Center Flue Oil-Fired Water Heater, 50 Gallon
  • Designed and built to provide the homeowner and commercial user with dependable, highly efficient, production of hot water within a durable, long lasting water heater unit
  • All units are periodically tested by an independent laboratory to assure the highest achievable ratings for efficiency and reliable hot water flow
  • Ease of maintenance
  • All piped fittings are accessible from the front of the heater for servicing
  • The"female" temperature and pressure adapter will directly accept the"male" temperature and pressure relief valve
  • An extra large observation door for flame inspection and testing
  • Piping feeds slightly different on copper unit
  • Attractive baked enamel steel jacket
  • High density blanket insulation
  • Quality, fuel efficient beckett or carlin flame retention burner
  • Burner and immersion type dual aquastat prewired at factory
  • Oil burner nozzle is installed at factory
  • 6" diameter flue collar
  • 0.95 firing rate
,
,



Therma-Flow Water Heaters 690-57

Item#:
690-57
Manufacturer Item:
S50GL
Manufacturer:
THERMA-FLOW, INC.
Bradford White RG250S6N Lead Free Atmospheric Vent Residential Natural Gas Water Heater, 50 Gallon, 50000 BTU
  • Intelligent gas control with proven millivolt powered technology
  • Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
  • Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
  • An exclusive green LED light prompts the installer during start-up and provides 10-different diagnostic codes to assist in troubleshooting
  • Flashing green LED provides positive indication that pilot is on
  • High-strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
  • Advanced Screenlok technology flame arrestor is designed to prevent ignition of flammable vapors outside of the water heater
  • Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow
  • Maintenance free - no regular cleaning of air inlet openings or flame arrestor is required under normal conditions
  • Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
  • Factory installed Hydrojet total performance system
  • Tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
  • Non-CFC foam insulation covers the sides and top of tank, reducing the amount of heat loss
  • Pedestal base, factory installed heat traps
  • Protective magnesium anode rods
  • 3 x 4""snap lock" draft diverter
  • Temperature and pressure relief valve installed
  • Durable tamper-proof design low restriction brass drain valve
  • 6 or 10 years limited tank and component parts warranties
,
,



RG250S6N

Item#:
RG250S6N
Manufacturer Item:
RG250S6N
Manufacturer:
BRADFORD WHITE CORPORATION
Bock Water Heaters SideKick 30SK Powder Coated Steel Indirect Water Heater, 30 Gallon, 8 gpm, 56000 BTU
  • Single-wall full throat 1-1/2" diameter internal coil heat exchanger
  • Factory installed aquastat on all models
  • Factory installed temperature and pressure relief valve and brass drain valve
  • Robust construction - inner tank is precision built from high quality steel and repetitive pressure testing assures the highest quality
  • All steel construction with an environmentally-friendly powder coat finish providing a tough and attractive exterior
  • Cobalt-enriched porcelain enamel glass lined tank and coil are highly resistant to aggressive water not susceptible to damage due to the presence of chloride in the water
  • Ecomate insulation does not contribute to global warming
  • Two magnesium anode rods - inhibit corrosion and maximize tank life. Electrolysis attacks the anode rods, not the tank
  • Factory installed dielectric nipples on boiler connections - provides greater insulating protection
,
,



bock water heaters 30sk

Item#:
30SK
Manufacturer Item:
30SK
Manufacturer:
BOCK WATER HEATERS
Therma-Flow E70GL Rear Flue Oil-Fired Water Heater, 70 Gallon
  • Designed and built to provide the homeowner and commercial user with dependable, highly efficient, production of hot water within a durable, long lasting water heater unit
  • All units are periodically tested by an independent laboratory to assure the highest achievable ratings for efficiency and reliable hot water flow
  • Ease of maintenance
  • All piped fittings are accessible from the front of the heater for servicing
  • The"female" temperature and pressure adapter will directly accept the"male" temperature and pressure relief valve
  • An extra large observation door for flame inspection and testing
  • Piping feeds slightly different on copper unit
  • Attractive baked enamel steel jacket
  • High density blanket insulation
  • Quality, fuel efficient beckett or carlin flame retention burner
  • Burner and immersion type dual aquastat prewired at factory
  • Oil burner nozzle is installed at factory
  • 6" diameter flue collar
  • 1 firing rate
,
,



Therma-Flow Water Heaters 690-34

Item#:
690-34
Manufacturer Item:
E70GL
Manufacturer:
THERMA-FLOW, INC.
Bradford White RG240T6X Lead Free Residential Atmospheric Vent LP Water Heater, 40 Gallon, 36000 BTU
  • Intelligent gas control with proven millivolt powered technology and built-in piezo igniter
  • Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
  • Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
  • An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
  • Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
  • An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas) is fused to the steel surface by firing at a temperature of over 1600 deg F
  • Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies, and jacket rigidity
  • Temperature and pressure relief valve installed
  • Durable tamper proof design low restriction brass drain valve
  • Protective magnesium anode rod
  • Factory installed heat traps
  • Factory installed hydrojet total performance system
  • Advanced screenlok technology flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater
  • Flashing green LED provides positive indication that pilot is on
  • High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
  • Pedestal base
  • No regular cleaning of air inlet openings or flame arrestor is required under normal conditions
  • 6 years limited tank and component parts warranty
  • 3 x 4""snap lock" draft diverter
  • Less than 40 ng/J NOx emissions
  • Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow
,
,



RG240T6X

Item#:
RG240T6X
Manufacturer Item:
RG240T6X
Manufacturer:
BRADFORD WHITE CORPORATION
oil tankless water heaters
,
,



Therma-Flow Water Heaters 690-32

Item#:
690-32
Manufacturer Item:
E50GL
Manufacturer:
THERMA-FLOW, INC.
Therma-flow/everhot series hot water boosters have been specifically designed to eliminate service problems. All fittings have been positioned for front access, enabling the units to be conveniently installed even in tight corners. In addition, the anode rod can be removed without dismantling the jacket top and related water pipe connections. The installation of a therma-flow/everhot hot water booster will enable the present boiler to operate at a lower temperature, thereby reducing overall fuel consumption.
  • High density fiberglass insulation
  • Heavy gauge steel jacket
  • Equipped with immersion type aquastat, bronze circulator
  • 5 years guarantee
,
,



Therma-Flow 690-67

Item#:
690-67
Manufacturer Item:
WB-50
Manufacturer:
THERMA-FLOW, INC.
Bradford White RG240T6N Lead Free Atmospheric Vent Residential Natural Gas Water Heater, 40 Gallon, 11.7 kw, 40000 BTU
  • Intelligent gas control with proven millivolt powered technology
  • Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
  • Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
  • An exclusive green LED light prompts the installer during start-up and provides 10-different diagnostic codes to assist in troubleshooting
  • Flashing green LED provides positive indication that pilot is on
  • High-strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
  • Advanced Screenlok® technology flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater
  • Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow
  • Maintenance free - no regular cleaning of air inlet openings or flame arrestor is required under normal conditions
  • Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
  • Factory-installed Hydrojet® total performance system
  • Tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
  • Non-CFC foam insulation covers the sides and top of tank, reducing the amount of heat loss
  • Pedestal base, factory installed heat traps
  • Protective magnesium anode rod
  • 3 x 4""snap lock" draft diverter
  • Temperature and pressure relief valve included
  • Durable tamper-proof design low restriction brass drain valve
  • 6 or 10 years limited tank and component parts warranties
,
,



Bradford White Water Heaters RG240T6N

Item#:
RG240T6N
Manufacturer Item:
RG240T6N
Manufacturer:
BRADFORD WHITE CORPORATION
Therma-Flow E30GL Rear Flue Oil-Fired Water Heater, 30 Gallon
  • Designed and built to provide the homeowner and commercial user with dependable, highly efficient, production of hot water within a durable, long lasting water heater unit
  • All units are periodically tested by an independent laboratory to assure the highest achievable ratings for efficiency and reliable hot water flow
  • Ease of maintenance
  • All piped fittings are accessible from the front of the heater for servicing
  • The"female" temperature and pressure adapter will directly accept the"male" temperature and pressure relief valve
  • An extra large observation door for flame inspection and testing
  • Piping feeds slightly different on copper unit
  • Attractive baked enamel steel jacket
  • High density blanket insulation
  • Quality, fuel efficient beckett or carlin flame retention burner
  • Burner and immersion type dual aquastat prewired at factory
  • Oil burner nozzle is installed at factory
  • 6" diameter flue collar
  • 0.75 firing rate
,

,



Therma-Flow Water Heaters 690-29

Item#:
690-29
Manufacturer Item:
E30GL
Manufacturer:
THERMA-FLOW, INC.
Therma-flow/everhot series hot water boosters have been specifically designed to eliminate service problems. All fittings have been positioned for front access, enabling the units to be conveniently installed even in tight corners. In addition, the anode rod can be removed without dismantling the jacket top and related water pipe connections. The installation of a therma-flow/everhot hot water booster will enable the present boiler to operate at a lower temperature, thereby reducing overall fuel consumption.
  • High density fiberglass insulation
  • Heavy gauge steel jacket
  • Equipped with immersion type aquastat, bronze circulator
  • 5 years guarantee
,
,



Therma-Flow 690-66

Item#:
690-66
Manufacturer Item:
WB-40
Manufacturer:
THERMA-FLOW, INC.
Bradford White RG24 S6X LP Gas Residential Gas Water Heater, 4 Gallon, 35 BTU
  • Intelligent gas control with proven millivolt powered technology
  • Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
  • Micro-processor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
  • An exclusive green LED light prompts the installer during start-up and provides 1 -different diagnostic codes to assist in troubleshooting
  • Flashing green LED provides positive indication that pilot is on
  • High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
  • Advanced ScreenLok technology flame arrestor is designed to prevent ignition of flammable vapors outside of the water heater
  • Proven and reliable bi-metallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow
  • Maintenance free - no regular cleaning of air inlet openings or flame arrestor is required under normal conditions
  • Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
  • Factory installed Hydrojet total performance system
  • Tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
  • Non-CFC foam insulation covers the sides and top of tank, reducing the amount of heat loss
  • Pedestal base, factory installed heat traps
  • Protective magnesium anode rods
  • 3 x 4""snap lock" draft diverter
  • Temperature and pressure relief valve included
  • Durable tamper proof design low restriction brass drain valve
  • 6 or 1 years limited tank and component parts warranty
,
,



RG240S6X

Item#:
RG240S6X
Manufacturer Item:
577640
Manufacturer:
BRADFORD WHITE CORPORATION
|◀ 73 - 84 of 202 ▶|
View: