White Rodgers Cooling Controls 1609-90 Gray Remote Bulb Refrigeration Temperature Control, -20 to 50 deg F, 120/240 VAC, 8 feet Capillary Length

• Provide positive control of refrigeration applications where remote control is desired
• Hydraulic action element
• Dustproof steel case with top and bottom knockouts
• Temperature dial graduated in deg F and deg C and can be adjusted through cover
• High electrical ratings allow operation of most equipment without use of relays or motor starters
• Adjustable differential temperature
• Clamp included with all models except bulb mounting

,

1609-90

White Rodgers Cooling Controls 169-11 Gray Remote Bulb Temperature Control, -3 to 9 deg F, 12 - 24 VAC

Sid Harvey Item #:C1000-1: Replaces Part #:'s : C877-55,

White Rodgers Cooling Controls 1687-9 Gray Remote Bulb Temperature Control, -3 to 9 deg F, 12 - 24 VAC

Sid Harvey Item #:C1000-20: Replaces Part #:'s : 38994,

C1000-20

White Rodgers Cooling Controls 16E09-101 Electronic Temperature Control, -40 to 220 deg F, 24/120/208/240 VAC

• Control enclosure ambient temperatures
• No common wire required when electrical load must be greater than 2.5 amp and uninterrupted
• Electronic temperature accuracy
• Alarm output with selectable delay
• Adjustable anti-short cycle delay
• Set point locking function
• Non-flammable UL94V0 thermoplastic

,

White Rodgers Cooling Controls F92-0659 Regulated Natural to L.P. Gas Conversion Kit,

white rodgers f92-0659

The 50A55-3797 is an automatic gas interrupted ignition control that employs a microprocessor to continually monitor, analyze, and control the proper operation of the gas burner, inducer, and fan. signals interpreted during continual surveillance of the thermostat and flame sensing element initiate automatic ignition of the burner, sensing of the flame, and system shutoff during normal operation. these controls incorporate system fault analysis for quick gas flow shutoff , coupled with automatic ignition retry upon sensing a fault correction. it is designed as a replacement for the following controls.

• Fused to protect low VAC age system transformers
• 120 VAC igniter output
• 120 VAC humidifier output
• 120 VAC electronic air cleaner output
• 120 VAC 2-speed PSC circulator output
• 5 amp fuse protection
• Furnace status LED
• Heat fan off delay (dipswitch selectable)
• 1.5 amp valve relay
• 6 amp igniter relay
• 2.2 amp full load - 3.5 amp locked rotor inducer relay
• 14.5 amp full load - 25 amp locked rotor circulator relay
• 1 micro-amp DC minimum current
• 0.1 micro-amp DC max current
• 100 mega-ohm leakage resistance
• Maximum timing specification
• 0.8 sec flame establishing
• 2 sec flame failure response time
• Flash code diagnostics

,

white rodgers 50a55-3797

White Rodgers Cooling Controls 50A55-743 Replacement Integrated Furnace Control, 25 VAC, 0.45 amp, Import The 50A55-743 is an automatic gas interrupted ignition control that employs a microprocessor to continually monitor, analyze, and control the proper operation of the gas burner, inducer, and fan. signals interpreted during continual surveillance of the thermostat and flame sensing element initiate automatic ignition of the burner, sensing of the flame, and system shutoff during normal operation. these controls incorporate system fault analysis for quick gas flow shutoff , coupled with automatic ignition retry upon sensing a fault correction. it is designed as a replacement for the following controls.

• Twinning connection
• Fused to protect low voltage system transformers
• 120 VAC igniter output
• 120 VAC humidifier output
• 120 VAC electronic air cleaner output
• 120 VAC 2-speed PSC circulator output
• 5 amp fuse protection
• Furnace status LED
• Heat fan off delay (dipswitch selectable)
• 1.5 amp valve relay
• 6 amp igniter relay
• 2.2 amp full load - 3.5 amp locked rotor inducer relay
• 14.5 amp full load - 25 amp locked rotor circulator relay
• 1 micro-amp DC minimum current
• 0.10 micro-amp DC max current
• 100 mega-ohm leakage resistance
• Maximum timing specification
• 0.8 sec flame establishing
• Flash code diagnostics The 50A55-743 is an automatic gas interrupted ignition control that employs a microprocessor to continually monitor, analyze, and control the proper operation of the gas burner, inducer, and fan. signals interpreted during continual surveillance of the thermostat and flame sensing element initiate automatic ignition of the burner, sensing of the flame, and system shutoff during normal operation. these controls incorporate system fault analysis for quick gas flow shutoff , coupled with automatic ignition retry upon sensing a fault correction. it is designed as a replacement for the following controls.Sid Harvey Item #:50A55-743: Replaces Part #:'s : 50A55-289,

White Rodgers Cooling Controls G567-98 Resistor 36C,

G567-98

The future of refrigeration is here and Copeland is leading the way with technology has been designed for maximum efficiency and a full range of low-GWP refrigerants. Beyond our next-gen Copeland compressors that live at the heart of the refrigeration system that you have depended on. Helping your business while helping you get prepare for tomorrows challenges today. Refrigeration Condensing Unit 4 HP 230/1

066078

White Rodgers Cooling Controls Sensi 1F86U-42WF White 7 days Program Wi-Fi Thermostat, 2H/2C, 4H/2C Heat Pump, 0 - 30 VAC , 45 - 99 deg F

• Easy to install - works with existing wiring in most applications, traditional wiring and configuration
• Simple to connect - connect to home Wi-Fi at installation, step-by-step guide in smartphone app
• Over-the-air (OTA) product updates - the first Sensi thermostat sold is better than ever, connected customers automatically receive the latest features
• Universal application - works without wi-fi as a standard thermostat
• Smart home, meet smart comfort - control multiple thermostats, connect with multiple smart home platforms
• Sensi app features include - control heating and cooling from anywhere, receive high and low temperature or loss of heating or cooling alert emails
• Set a schedule, adjust the temperature or check the room temperature, current settings and upcoming program changes with intuitive day-at-a-glance schedule bar
• Current room humidity (display, not control), automatic daylight savings time adjustment
• Maintains room temperature to within plus or minus 1 deg F, room temperature display can be recalibrated up to plus or minus 5 deg F
• Permanent program retention during power loss, A/C compressor protection
• Intuitive scheduling - fits any lifestyle
• Thermostat settings - flexible for each connected device
• Contractor contact information - for service at your customer's fingertips
• Backlight butTon - for easier low-light viewing
• Energy savings up to 30%
• Energy management recovery/early start recovery, 2/2 dual fuel heat stages HP/gas, selectable degree F/C
• Battery with power stealing assist
• 5 years limited warranty

,

1F86U-42WF

White Rodgers Cooling Controls Sensi 1F87U-42WF 7 days Program Wi-Fi Thermostat, 2 Heat/2 Cool Conventional Systems, 4 Heat/2 Cool Heat Pump, 20 - 30 VAC , 50 - 99 deg F

White Rodgers 1F87U-42WF

PRIORITIZED COMFORT: Control the temperature where you need it most.

REDUCE HOT AND COLD SPOTS: Choose to average your temperature settings across all sensors and thermostats to help reduce hot and cold spots.

TEMP AND HUMIDITY MONITORING: View room temperatures and humidity levels across your home.

FLEXIBLE PLACEMENT: No wires needed. Use the stand or mount directly on a wall.

THERMOSTAT COMPATIBILITY: Sensi Room Sensors are compatible with the Sensi Touch 2 Smart Thermostat.,