White Rodgers Cooling Controls 3046-5 Mercury Flame Sensor, 2-1/16" W x 2-3/4" H x 1-7/8" D

• Contacts close approximately 60 sec after pilot is ignited, open approximately 40 sec after flame is extinguished
• Prevent gas flow to main burner if pilot flame is not burning or is insufficient to properly ignite main burner
• These sensors combine a rugged snap-action switch and powerful mercury actuated thermal element
• Used with natural, manufactured or mixed gases and with LP gases where means are provided for obtaining automatic pilot gas shut-off
• Switch may be conveniently mounted in any position
• Cover is easily removed, making switch terminals readily accessible
• No button to depress - sensors are recycling type which require relighting or possible restoration of proper gas pressure to return to operation
• 90 VA at 30 VAC, 125 VA at 120 and 240 VAC electrical rating

Sid Harvey Item #:G581: Replaces Part #:'s : 24325,

G581

White Rodgers Cooling Controls 3098-134 Mercury Flame Sensor for Proving Pilot Flame and Controlling Main Valve in Cycle Pilot Applications, 48" Element

White Rodgers G567-56

White Rodgers Cooling Controls 3098-156 Mercury Flame Sensor for Proving Pilot Flame and Controlling Main Valve in Cycle Pilot Applications, 48" Element

White Rodgers G567-62

White Rodgers Cooling Controls HotRod Ex 21D64-44 Nitride Hot Surface Igniter Kit, 120 volt, 14-1/2" Lead

White Rodgers 21D64-44

The 50A66-743 is an automatic gas interrupted ignition control that employs a microprocessor to continually monitor, analyze, and control the proper operation of the gas burner, inducer, and fan. signals interpreted during continual surveillance of the thermostat and flame sensing element initiate automatic ignition of the burner, sensing of the flame, and system shutoff during normal operation. these controls incorporate system fault analysis for quick gas flow shutoff , coupled with automatic ignition retry upon sensing a fault correction.

• 3-fan speeds
• Remote flame sensing
• Humidifier and electronic air cleaner connections (optional)
• 1.5 amp valve relay
• 6 amp igniter relay
• 2.2 amp full load - 3.5 amp locked rotor inducer relay
• 14.5 amp full load - 25 amp locked rotor circulator relay
• Diagnostic indicator flash codes, controls gas valve, igniter, blower, inducer, humidifier and air cleaner

Sid Harvey Item #:50A66-743: Replaces Part #:'s : 100925-01 | 100925-02 | 100925-03 | 10092501 | 10092502 | 10092503 |,

White Rodgers Cooling Controls 1F89-0211 White Non-Programmable Digital Thermostat, 2H/1C, 0 - 30 VAC , 45 - 90 deg F

• Exclusive - easy push-connect color coded terminals
• Exclusive cool savings feature saves energy during peak A/C demand periods
• Long battery life, exclusive battery power monitor
• Energy savings up to 33%
• Patented pre-programmed schedule simplifies time and temperature programming
• Easy to read LCD with improved contrast
• Lighted display for easier low light viewing
• Permanent program retention during power loss
• Setpoint hold, simple setup menu to activate optional features
• Soft touch keypad, easy access battery compartment
• Fast (FA) or slow (SL) heating cycle anticipation
• Easy to wire push-connect color coded terminals
• Compressor lockout protection, electric heat option, milliVAC compatible
• Display temperature recalibration (plus or minus 4 deg F)
• Ignition module reset
• Air filter change indicator
• 5 years limited warranty

,

White Rodgers 1F89-0211

White Rodgers Cooling Controls 1F56N-444 White Non-Programmable Mercury-Free Mechanical Thermostat, 1H/1C, 20 - 30 VAC , 50 - 90 deg F

Sid Harvey Item #:C202: Replaces Part #:'s : 39854,

White Rodgers C202

White Rodgers Cooling Controls 1E56N-444 White Non-Programmable Mercury-Free Mechanical Thermostat, 1H/1C, 20 - 30 VAC , 50 - 90 deg F

• Enclosed contacts for increased reliability and accuracy
• Mercury free snap-action contacts with dust cover
• Resistant to vibration
• Mounts to wall or junction box
• Built-in bi-metal thermometer
• Adjustable from 0.15 - 1.2 amp heat and fixed cool anticipator
• Milli-VAC compatible
• 5 years limited warranty

Sid Harvey Item #:1E56N-444: Replaces Part #:'s : 38270,

White Rodgers Cooling Controls 1E30N-910 White Non-Programmable Mercury-Free Mechanical Thermostat, 1H, 20 - 30 VAC , 50 - 90 deg F

White Rodgers 1E30N-910

White Rodgers Cooling Controls 1F86-344 White Non-Programmable Digital Thermostat, 1H/1C, mV - 30 VAC Battery, 20 - 30 VAC Hardwire, 45 - 99 deg F

White Rodgers 1F86-344

The vertical 70 series thermostats build your new construction business. It's the first series of flexible thermostats enabling customers to wire and mount one subbase for use with the temporary new construction thermostat and easily snap on an upgrade to any 1E78 digital model upon building completion. The vertical 70 series low-profile design blends narrow width with new home decors. The universal subbase, for use with all 1E78 models, is designed to mount on a 2 x 4" junction box or directly to the wall. There is also an optional wall plate for use in retro-fit applications. The 70 series thermostats are battery powered, making them easy to install and compatible with most heating and cooling systems. The vertical 70 series is perfect for new construction customers who want a quick and easy transition to job completion.

• Fossil fuel or electric compatible
• Large LCD with backlight, easy-to-read thermostat display lighted display for easier low-light viewing
• Selectable celsius or fahrenheit temperature display
• Includes B/O terminals
• Electronic temperature accuracy
• Energy savings up to 33%
• Adjustable room temperature calibration
• Covers wall marks left by most mechanical thermostats the need for an extra wall plate
• Maintains room temperature differential within plus or minus 1 deg

Sid Harvey Item #:1E78-144: Replaces Part #:'s : L40-495,

White Rodgers Cooling Controls 1F78-144 White Non-Programmable Digital Thermostat, 1H/1C, mV - 30 VAC , 45 - 90 deg F

White Rodgers 1F78-144