S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Parker C-EC-SC Series Balance Ported Thermostatic Expansion Valve Body
3/8" X 1/2"
1/2-1-1/2 Ton
Parker SC-A-3X4-ODF-BODY
Item#:
SC-A-3X4-ODF-BODY
Manufacturer Item:
040501-02
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
The Parker Refrigeration Valves consist of solenoid valves for liquid, suction and hot gas defrost application requirements.
The valves are compatible with virtually all of todays commercially available CFC, HCFC and HFC refrigerants and blends.
The Parker refrigeration valves meet a broad range of system needs including refrigeration, air conditioning and freezing applications.
From small fractional tonnage to large systems. The portfolio is endowed with numerous benefits including
- Normally closed and
normally open valves
- Type: Normally Closed
- Connection 1/4
- Connection: ODF
- Port (In.): 7/64"
- Body Type: Brass
- Safe Working Pressure (PSI): 500
- State of the art operator performance for long life, ease of service and tighter system integrity
- High pressure ratings to comply with R410A
- Extended end sweat connections enable brazing installation without disassembly
- AC & DC coils are interchangeable on all valve body versions
Parker R42E197M
Item#:
R42E197M
Manufacturer Item:
ME19S270-HP
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker C-EC-SC Series Balance Ported Thermostatic Expansion Valve Body
- 3/8" x 1/2" OD
Parker SCE-C-3X4-ODF-BODY
Item#:
SCE-C-3X4-ODF-BODY
Manufacturer Item:
040501-06
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
The Parker Refrigeration Valves consist of solenoid valves for liquid, suction and hot gas defrost application requirements.
The valves are compatible with virtually all of todays commercially available CFC, HCFC and HFC refrigerants and blends.
The Parker refrigeration valves meet a broad range of system needs including refrigeration, air conditioning and freezing applications.
From small fractional tonnage to large systems. The portfolio is endowed with numerous benefits including
- Normally closed and
normally open valves
- Type: Normally Closed
- Connection 1/4
- Connection: ODF
- Port (In.): 7/64"
- Body Type: Brass
- Safe Working Pressure (PSI): 500
- State of the art operator performance for long life, ease of service and tighter system integrity
- High pressure ratings to comply with R410A
- Extended end sweat connections enable brazing installation without disassembly
- AC & DC coils are interchangeable on all valve body versions
Parker R46E259M
Item#:
R46E259M
Manufacturer Item:
ME25S290-HP
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker Suction Line Filter Drier
Solid Core, Activated Alumina Suction Line Filter Dryer
Special desiccant for high acid pick-up
3/4" OD
Lemgth 4.72"
Copper Ends
High Acid Capacity
Low Pressure Drop
Designed for System Clean-Up
500 Hours Salt Spray Protection
Parker SLD8-6SVHH
Item#:
SLD8-6SVHH
Manufacturer Item:
450027-001
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker SORIT-PI-411S-0/100
Item#:
SORIT-PI-411S-0/100
Manufacturer Item:
149051
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker evaporator Pressure Regulating Valves are mechanical regulators which use highside system pressure as a source of operating power.
They were developed specifically for systems where accurate control and minimum pressure drop are important requirements.
1-5/8" OD
Uses MKC-1/PKC1 Coils
Parker SORIT20
Item#:
SORIT20
Manufacturer Item:
SORIT20
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker evaporator Pressure Regulating Valves are mechanical regulators which use highside system pressure as a source of operating power.
They were developed specifically for systems where accurate control and minimum pressure drop are important requirements.
1-1/8" OD
Uses MKC-1/PKC1 Coils
Parker SORIT12
Item#:
SORIT12
Manufacturer Item:
901611P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker Suction Line Filter Drier
Solid Core, Activated Alumina Suction Line Filter Dryer
1-1/8" OD
Lemgth 7-3/4"
Copper Ends
High Acid Capacity
Low Pressure Drop
Designed for System Clean-Up
500 Hours Salt Spray Protection
Parker SLD27-9SVHH
Item#:
SLD27-9SVHH
Manufacturer Item:
450041-001
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker SORIT-PI-29S-0/100 Evaporator Pressure Regulating Valve 1-1/8" OD 0/100 psi
Parker SORIT-PI-29S-0/100
Item#:
SORIT-PI-29S-0/100
Manufacturer Item:
149018
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker SORIT-PI-311S-0/100 Evaporator Pressure Regulating Valve 1-3/8" OD 0/100 psi
Parker SORIT-PI-311S-0/100
Item#:
SORIT-PI-311S-0/100
Manufacturer Item:
149039
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker commercial pressure regulator (S)PORT/(S)PORTII valves are designed with stainless steel bonnet bolts, adjusting stems, and piston and plug assemblies.
The result is a regulator designed to withstand the rigorous application environment a low side regulator must endure. Models are available in combinations of
connection sizes, port sizes and features as designated by the model code. Unlike some competitive models of low side regulators that utilize high pressure
discharge gas as a pilot source, they are piloted with upstream pressure. This eliminates the requirement for hot gas headers, isolation devices, piping, and the
labor associated with the installation of other valves. Flare connections from high pressure pilot lines are also eliminated, minimizing sources for prospective leaks.
The valves are an integrated assembly of (4) modules: 1) a body, which contains no moving parts, 2) a capacity cartridge, which contains both piston and modulating plug,
and defines the port size and onto which the pilot solenoids providing the"S" (shut-off) or"B" (bypass) features are added as required, 4) the bonnet, containing the
range spring and adjustment screw, which is set for the value of pressure which the valve is to maintain. The unique modular design allows the regulator to be soldered
into the line without disassembly, yet provides full access for disassembly, cleaning and servicing from the top only. Interchangeable capacity cartridges facilitate flow
revisions should an undersized or oversized condition be encountered, while pilot adapters can be changed out to add features or even change functions.
- Retrofitting for additional evaporator capacity is simple and requires no pipe line revisions
- The piston and plug assembly can handle reduced flow conditions and controlling down to about 15% of the valve's maximum capacity
- 7/8" OD
- Designed entirely with corrosion resistant materials
- New cooler running coil and open frame coil housing
- New dual Voltage 208/240/60 Hz coil
- Conveniently located access fitting
- Pilot operated for close control at desired set-point
- Excellent regulation at light loads
- Interchangeable capacity cartridges
- Low pressure drop
- Few moving parts
- Long-life stainless steel diaphragms (no bellows to fail)
- Pilot electric shut-off
- All service from the top
- Sweat-in-place without disassembly
Parker SPORT-21-21
Item#:
SPORT-21-21
Manufacturer Item:
103849
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)