Home  > PARKER HANNIFIN(AFTERMARKET)(x)
|◀ ◀ 13 - 24 of 236 ▶ ▶|
View:

Straight Through Electronic Regulator Valve #7 1-3/8" OD R134A,R404A, R507,R407C,R410A

Straight Through Electronic Regulator Valve #7 1-3/8" OD
    Bi-Polar Stepper Motor
      Tight Seating Piston Pesign
        Serviceable Construction
          Construction Brass & Copper
            Actuator Design Provides Great Resolution

            Parker CDST-7-11-20FT-S

Item#:
CDST-7-11-20FT-S
Manufacturer Item:
805618
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)

Head Pressure Control Valve 20 psi 5/8" OD Opens on Rise of Differential Pressure

The ORD valve is a pressure differential valve that responds to changes in the pressure difference across the valve, Figure 6 on the next page. The valve designation stands for Opens on Rise of Differential pressure. Therefore, the ORD is dependent on some other control valve or action for its operation. And in this respect, it is used with the ORI for head pressure control. As the ORI valve starts to throttle the flow of liquid refrigerant from the condenser, a pressure differential is created across the ORD. When the differential reaches setpoint, the ORD starts to open and bypasses hot gas to the liquid drain line. As the differential increases, the ORD opens further until its full stroke is reached at a differential of 10 psi above setpoint. Due to its function in the control of head pressure, the full stroke can be utilized in selecting the ORD. The standard pressure setting for the ORD is 20 psig. For systems where the pressure drop between the compressor and the receiver is higher than 14 psi, an ORD with a higher setting is available.
    20 PSI
      5/8" OD

      Parker ORD-4-20

Item#:
ORD-4-20
Manufacturer Item:
902877
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)

Expansion Valve SCE Series External Angle 3/8" x 1/2" OD 1-2 TonA R404A

Parker C-EC-SC Series Balance Ported Thermostatic Expansion Valve Body
    3/8" x 1/2" OD
  • 1-2 HP, R404A low Temperature Pressure Limited
  • The SC(E) series brass body expansion valve incorporates a 90 deg elbow inlet with a removable strainer
  • External

    Parker SCE-B-SX35

Item#:
SCE-B-SX35
Manufacturer Item:
SBFSE-B-ZP
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
 
Parker-SCE-Series_Spec

Solenoid Coil 120 VAC 18" Wire Leads

Parker CF5C05-R1021 Solenoid Valve Coil, 120 VAC
  • 18" lead wire connection

    Parker CF5C05-R1021

Item#:
CF5C05-R1021
Manufacturer Item:
CF5C05-R1021
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
 
CF5C05-R1021_Spec

Build A Valve External Expansion Valve 3/8" x 1/2" Flare 1-2 Ton

Parker Brass Charge W External Equalizer Type C Thermostatic Expansion Valve, 3/8" x 1/2" Flare, 1-2 ton, R-402A, R-404A, R-507, R-402B, R-502
    The Parker C-EC-SC Series balance ported thermostatic expansion valves have a brass bar stock body with flare or sweat connections, adjustable superheat, long lasting replaceable power element and accessible internal parts. Each valve is factory tested to ensure positive leak-free performance. The balance port design provides perfect pin and port alignment and prevents pressure drop across the valve from influencing valve operation.
      Also available is the Parker C Series Interchangeable valve. These C Valves are supplied in two components, the thermostatic element and the valve body. The interchangeable nature of this part of the C family makes it ideal for reducing inventory, while increasing valve options.
        Markets
          Air Conditioning
            Refrigeration  Food Retail
              Transportation
                Industrial  Food Storage units
                  Features/Benefits:
                    Balance port design provides perfect pin and port alignment and prevents pressure drop across the valve from influencing valve operation
                      Thermostatic charges available to match system conditions
                        Available with external equalizer and internal equalizer
                          Design working pressure of 450 psi (31 bar)
                            Applications:
                              Systems with widely varying operating conditions
                                Capacity ranges from 1/8 to 8 ton R-22
                                  Supermarket cases and rack systems, Food and Beverage units
                                    Air Conditioning  Residential, Commercial, Chillers
                                      Transportation  Units on Truck/Trailer, Bus and Vans

                                      Parker CE-B-SZ

Item#:
CE-B-SZ
Manufacturer Item:
040338-03
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
 
Parker-C-CE-Valves_Spec

Build A Valve External Expansion Valve 1/4" x 1/2" Flare 1/3-1/2 Ton

Parker Brass Charge W External Equalizer Type C Thermostatic Expansion Valve, 1/4" x 1/2" Flare, 1/3-1/2 ton, R-22, R407C
    The Parker C-EC-SC Series balance ported thermostatic expansion valves have a brass bar stock body with flare or sweat connections, adjustable superheat, long lasting replaceable power element and accessible internal parts. Each valve is factory tested to ensure positive leak-free performance. The balance port design provides perfect pin and port alignment and prevents pressure drop across the valve from influencing valve operation.
      Also available is the Parker C Series Interchangeable valve. These C Valves are supplied in two components, the thermostatic element and the valve body. The interchangeable nature of this part of the C family makes it ideal for reducing inventory, while increasing valve options.
        Markets
          Air Conditioning
            Refrigeration  Food Retail
              Transportation
                Industrial  Food Storage units
                  Features/Benefits:
                    Balance port design provides perfect pin and port alignment and prevents pressure drop across the valve from influencing valve operation
                      Thermostatic charges available to match system conditions
                        Available with external equalizer and internal equalizer
                          Design working pressure of 450 psi (31 bar)
                            Applications:
                              Systems with widely varying operating conditions
                                Capacity ranges from 1/8 to 8 ton R-22
                                  Supermarket cases and rack systems, Food and Beverage units
                                    Air Conditioning  Residential, Commercial, Chillers
                                      Transportation  Units on Truck/Trailer, Bus and Vans,

                                      Parker CE-AA-VW

Item#:
CE-AA-VW
Manufacturer Item:
RVE-1/2-C
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
 
Parker-C-CE-Valves_Spec

Build A Valve Internal Expansion Valve 3/8" x 1/2" Flare 1-2 Ton

Parker Brass Charge W Internal Equalizer Type C Thermostatic Expansion Valve, 3/8" x 1/2" Flare, 1 - 2 ton, R-402A, R-404A, R-507, R-402B, R-502
    The Parker C-EC-SC Series balance ported thermostatic expansion valves have a brass bar stock body with flare or sweat connections, adjustable superheat, long lasting replaceable power element and accessible internal parts. Each valve is factory tested to ensure positive leak-free performance. The balance port design provides perfect pin and port alignment and prevents pressure drop across the valve from influencing valve operation.
      Also available is the Parker C Series Interchangeable valve. These C Valves are supplied in two components, the thermostatic element and the valve body. The interchangeable nature of this part of the C family makes it ideal for reducing inventory, while increasing valve options.
        Markets
          Air Conditioning
            Refrigeration  Food Retail
              Transportation
                Industrial  Food Storage units
                  Features/Benefits:
                    Balance port design provides perfect pin and port alignment and prevents pressure drop across the valve from influencing valve operation
                      Thermostatic charges available to match system conditions
                        Available with external equalizer and internal equalizer
                          Design working pressure of 450 psi (31 bar)
                            Applications:
                              Systems with widely varying operating conditions
                                Capacity ranges from 1/8 to 8 ton R-22
                                  Supermarket cases and rack systems, Food and Beverage units
                                    Air Conditioning  Residential, Commercial, Chillers
                                      Transportation  Units on Truck/Trailer, Bus and Vans,

                                      Parker C-B-SW

Item#:
C-B-SW
Manufacturer Item:
RS-2-C
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
 
Parker-C-CE-Valves_Spec

Build A Valve External Expansion Valve 3/8" x 1/2" OD 1/2-1 Ton

Parker Brass Charge External Equalizer Type ECE Thermostatic Expansion Valve, 3/8" x 1/2" OD Solder, 1/2-1 Ton, R12, R134A
    Balance port design provides perfect pin and port alignment and prevents pressure drop across the valve from influencing valve operation
  • Each valve is factory tested to ensure positive leak free performance
  • Removable power element
  • Field adjustable superheat

    Parker ECE-A-JW

Item#:
ECE-A-JW
Manufacturer Item:
040297-01
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
 
ECE-TXV-Valve_Spec

Build A Valve External Expansion Valve 3/8" x 1/2" OD 1/2-1 Ton

Parker 040318-02 Brass Charge x35 External Equalizer Type ECE Thermostatic Expansion Valve, 3/8" x 1/2" OD Solder, 1/2 - 1 Ton, R-404A
    Balance port design provides perfect pin and port alignment and prevents pressure drop across the valve from influencing valve operation
  • Each valve is factory tested to ensure positive leak free performance
  • Removable power element
  • Field adjustable superheat

    Parker ECE-A-SX35

Item#:
ECE-A-SX35
Manufacturer Item:
EBFSE-A-ZP
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
 
Parker-E-EC-Series_Spec

Build A Valve External Expansion Valve 1/2" x 5/8" OD 1-2 Ton

Parker 040320-02 Brass Charge X35 External Equalizer Type ECE Thermostatic Expansion Valve, 1/2" x 5/8" OD Solder, 1 - 2 Ton, R-404A
    Balance port design provides perfect pin and port alignment and prevents pressure drop across the valve from influencing valve operation
  • Each valve is factory tested to ensure positive leak free performance
  • Removable power element
  • Field adjustable superheat

    Parker ECE-B-SX35

Item#:
ECE-B-SX35
Manufacturer Item:
EBFSE-B-ZP
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
 
Parker-E-EC-Series_Spec

Expansion Valve SCE Series External Angle 3/8" x 1/2" OD 1-1/2-3 Ton R22

Parker C-EC-SC Series Balance Ported Thermostatic Expansion Valve Body
    3/8" x 1/2" OD
  • 1-1/2-3 HP, R22
  • The SC(E) series brass body expansion valve incorporates a 90 deg elbow inlet with a removable strainer
  • Externa

    Parker SCE-B-VW

Item#:
SCE-B-VW
Manufacturer Item:
SBFVE-B-C
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
 
Parker-SCE-Series_Spec

Expansion Valve SCE Series External Angle 3/8" x 1/2" OD 1-2 Ton R404A

Parker C-EC-SC Series Balance Ported Thermostatic Expansion Valve Body
    3/8" x 1/2" OD
  • 1-2 HP, R404A
  • The SC(E) series brass body expansion valve incorporates a 90 deg elbow inlet with a removable strainer
  • External

    Parker SCE-B-SZ

Item#:
SCE-B-SZ
Manufacturer Item:
SBFSE-B-Z
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
 
Parker-SCE-Series_Spec
|◀ ◀ 13 - 24 of 236 ▶ ▶|
View: