1-pipe gravity feed installations
• 2 pipe lift installations to 12" Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Capacities to 60 gph
• 6-pressure options, 10 - 300 psi
• For no. 4 and lighter fuel oils (gasoline and JP fuels, special)
• Hub and flange mounting in any position
• 1/4" NPTF 2 inlets and return port
• Right nozzle location
  

  Suntec J4PA-B100G

Suntec J4PA-E1000G

With shaft for attaching an oil filter
• Startup - can be manually bled or primed during start up
• Operation - requires fuel unit to provide Vacuum to open and make fuel available
• Provides - protection for line break
  

  Suntec PRV38P

Single pipe gravity feed installations
• Two pipe lift installations to 12 Inch Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Capacities to 60 gph
• Six pressure options, 10 to 300 psi
• For no. 4 and lighter fuel oils (gasoline and JP fuels, special)
• Hub and flange mounting in any position
• 1/4 Inch NPTF 2 inlets and return port
• Left nozzle location
  

  suntec p1-5

1-pipe gravity feed installations
• 2 pipe lift installations to 12" Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Capacities to 60 gph
• 6-pressure options, 10 - 300 psi
• For no. 4 and lighter fuel oils (gasoline and JP fuels, special)
• Hub and flange mounting in any position
• 1/4" NPTF 2 inlets and return port
• Left nozzle location
  

  Suntec P4-10

Right hand nozzle port location
• Has a unique circuit that exhibits a dependable cut-off, a high 1-pipe lift capacity and automatic 2-pipe purging
• The pump circuit contains a positive displacement involute gear set and two controlling valves
• Fuel oil #2 and lighter, not compatible for use with blends higher than 5% biodiesel
• 1-pipe system (2-pipe system possible)
• Diaphragm cut-off
• Pressure regulation valve function
• 5/16" diameter shaft
  

  Suntec P4-101

(2) bolt flange mount
• 1/8 Inch NPTF pressure gauge/bleeder valve port
• Valve function pressure regulation
• Cut-off solenoid, 7 gph strainer
• Pressure adjustable (100 - 200 psi low fire, 200 - 300 psi high fire)
• Suction height single pipe: 6 Inch height maximum vacuum, 2-pipe: 17 Inch height maximum vacuum, to prevent air separation from oil
  

  Suntec P1-6

Single pipe installations to 6" Hg vacuum
• Two pipe installations to 12" Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Suitable for no. 2, no. 1 fuel oil, or kerosene
• Mounting in any position
• Factory set at 100 psi
• Adjustable range 100 - 150 psi at 3450 RPM, 100 - 135 psi at 1725 RPM, models available to 200 and 300 psi
• Right nozzle location
  

  suntec p4-83

Suntec 128117

Suntec 3715732-HK

Suntec 991378