S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Flanders Precisionaire 10155.012025 MERV4 Fiberglass Heavy-Duty Disposable Panel Air Filter 20" x 25" x 1" One-piece moisture-resistant chipboard frame Flanders HD industrial grade filters are designed for use in any application where disposable panel filters are recommended. They can be relied upon for superior performance since they are specifically designed for heavy workloads.
,
- 1-piece moisture resistant chipboard frame prevents broken corners
- The fiberglass media filter consists of continuous filament fibers bonded together with thermo-setting resin
- Support grilles of perforated corrosion resistant steel or expanded metal are provided on both sides of the filter
- The media pads and support grilles are continuously glued to the inside perimeter of the frame, resulting in exceptional strength and rigidity
- This design virtually eliminates the possibility of media sag within the frame
- Hot-melt resin sealant
,
10155.012025
10155.012025
Item#:
10155.012025
Manufacturer Item:
10155.012025
Manufacturer:
AIR FILTERS
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
Glasfloss 10X24X2P
Glasfloss 10X24X2P
Item#:
10X24X2P
Manufacturer Item:
ZLPSP2C10X24X2
Manufacturer:
AIR FILTERS
Flanders Precisionaire 10155.011620 MERV4 Fiberglass Heavy-Duty Disposable Panel Air Filter 16" x 20" x 1" One-piece moisture-resistant chipboard frame Flanders HD industrial grade filters are designed for use in any application where disposable panel filters are recommended. They can be relied upon for superior performance since they are specifically designed for heavy workloads.
,
- 1-piece moisture resistant chipboard frame prevents broken corners
- The fiberglass media filter consists of continuous filament fibers bonded together with thermo-setting resin
- Support grilles of perforated corrosion resistant steel or expanded metal are provided on both sides of the filter
- The media pads and support grilles are continuously glued to the inside perimeter of the frame, resulting in exceptional strength and rigidity
- This design virtually eliminates the possibility of media sag within the frame
- Hot-melt resin sealant
,
10155.011620
10155.011620
Item#:
10155.011620
Manufacturer Item:
10155.011620
Manufacturer:
AIR FILTERS
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
12X21X1P
12X21X1P
The Hi-E 40 is a medium efficiency pleated filter, available in 1" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 8 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy-duty beverage board frame moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA,
,12X15X1P
12X15X1P
Superior Filtration Products 14x24x1ECON MERV 8 Economy Pleated Disposable Air Filter 14" x 24" x 1"
NovaCell 2 filters by Superior Filtration Products are a pleated, high efficiency, MERV rated media filter designed for use in most commercial, industrial, and specialty installations with minimal or no modification to the existing system.
,
NovaCell 2 filters by Superior Filtration Products are a pleated, high efficiency, MERV rated media filter designed for use in most commercial, industrial, and specialty installations with minimal or no modification to the existing system.
- V-radius wedge pleat for maximum holding capacity
- Die-cut, 2-piece frame providing maximum strength and durability with a double wall heavy-duty high wet strength beverage board
- The filter media is bonded to the frame on all sides
- Adhesive bonding seal prevents air bypass for the efficiency of the filter as well as supports pleat spacing for even dust loading
- Stabilizer face grids bonded to the front and back of the pleats for durability and pleat stabilization
- The quality of construction of the Super Cell air filter will maintain its durability and integrity during installation and operation under normal conditions
,
14X24X1ECON
14X24X1ECON
Item#:
14X24X1ECON
Manufacturer Item:
14X24X1ECON
Manufacturer:
AIR FILTERS
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
Item#:
14X20X1PLEATED
Manufacturer Item:
S2M08SC-11420
Manufacturer:
AIR FILTERS
Superior Filtration Products 14x25x1ECON MERV 8 Economy Pleated Disposable Air Filter 14" x 25" x 1" Die-Cut Frame, Pleated in V-Radius Wedges, Cotton/Synthetic Media
NovaCell 2 filters by Superior Filtration Products are a pleated, high efficiency, MERV rated media filter designed for use in most commercial, industrial, and specialty installations with minimal or no modification to the existing system.
,
NovaCell 2 filters by Superior Filtration Products are a pleated, high efficiency, MERV rated media filter designed for use in most commercial, industrial, and specialty installations with minimal or no modification to the existing system.
- V-radius wedge pleat for maximum holding capacity
- Die-cut, 2-piece frame providing maximum strength and durability with a double wall heavy-duty high wet strength beverage board
- The filter media is bonded to the frame on all sides
- Adhesive bonding seal prevents air bypass for the efficiency of the filter as well as supports pleat spacing for even dust loading
- Stabilizer face grids bonded to the front and back of the pleats for durability and pleat stabilization
- The quality of construction of the Super Cell air filter will maintain its durability and integrity during installation and operation under normal conditions
,
14X25X1ECON
14X25X1ECON
Item#:
14X25X1ECON
Manufacturer Item:
S2M08EC-11425
Manufacturer:
AIR FILTERS
Superior Filtration Products 12x20x2ECON MERV 8 Economy Pleated Disposable Air Filter 12" x 20" x 2" Die-Cut Frame, Pleated in V-Radius Wedges, Cotton/Synthetic Media
Superior Filtration Products 12X20X2ECON
Superior Filtration Products 12X20X2ECON
Item#:
12X20X2ECON
Manufacturer Item:
S2M08EC-21220
Manufacturer:
AIR FILTERS
Superior Filtration Products 16x16x1ECON MERV 8 Economy Pleated Disposable Air Filter 16" x 16" x 1" Die-Cut Frame, Pleated in V-Radius Wedges, Cotton/Synthetic Media
Superior Filtration Products 16X16X1ECON
Superior Filtration Products 16X16X1ECON
Item#:
16X16X1ECON
Manufacturer Item:
S2M08EC-11616
Manufacturer:
AIR FILTERS
Superior Filtration Products 16x25x1ECON MERV 8 Economy Pleated Disposable Air Filter 16" x 25" 1" Die-Cut Frame, Pleated in V-Radius Wedges, Cotton/Synthetic Media
Superior Filtration Products 16X25X1ECON
Superior Filtration Products 16X25X1ECON
Item#:
16X25X1ECON
Manufacturer Item:
S2M08EC-11625
Manufacturer:
AIR FILTERS