S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The Hi-E 40 is a medium efficiency pleated filter, available in 1" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
,
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 10 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy duty beverage board frame - moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA
,
14X20X1 PL
Item#:
14X20X1 PL
Manufacturer Item:
HE40-14X20X1
Manufacturer:
AIR FILTERS
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
14X20X2 PL
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
14X23X1PL
The Hi-E 40 is a medium efficiency pleated filter, available in 1" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
,
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 10 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy duty beverage board frame - moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA
,
Purolator 14X24X1PL
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
14X25X1P
The Hi-E 40 is a medium efficiency pleated filter, available in 1" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
,
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 10 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy-duty beverage board frame moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA
,
14X25X2 PL
Item#:
14X25X2 PL
Manufacturer Item:
HE40-14X25X2
Manufacturer:
AIR FILTERS
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
14X28X2PL
The Hi-E 40 is a medium efficiency pleated filter, available in 1" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
,
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 10 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy duty beverage board frame - moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA
,
14X30X1PL
Item#:
14X30X1PL
Manufacturer Item:
HE40-STD1 14X30X1
Manufacturer:
AIR FILTERS
The Hi-E 40 is a medium efficiency pleated filter, available in 1" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
,
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 10 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy duty beverage board frame - moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA
,
15X20X1P
Item#:
15X20X1P
Manufacturer Item:
HE40-STD1 15X20X1
Manufacturer:
AIR FILTERS
The Hi-E 40 is a medium efficiency pleated filter, available in 2" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
,
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 10 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy duty beverage board frame - moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA
,
Purolator 15X20X2PL
Item#:
15X20X2PL
Manufacturer Item:
HE40-15X20X2
Manufacturer:
AIR FILTERS
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles