Malco 24F Folding Tool, 24" L

• Folding tool seams are formed from two steel halves, permanently joined together
• Handy sight holes assure proper depth alignmentSid Harvey Item #:T646-3B: Replaces Part #:'s : 13044,
  ,
  
  
  

Malco precision fit and hardened magnetic hex chuck drivers, with 1/4" power insert shanks, meet on-the-job demands for performance and service life whether installed on a power drill or used with a Connect quick change handle. Hex driver sizes are color coded for easy identification and are available in shorts, longs and extra long sizes.

Sid Harvey Item #:T475-50: Replaces Part #:'s : 13384,
,

Malco T475-50

The original Max2000 features euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrower handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. All Max2000 aviation snips feature superior hardened blade edges for"maximum" cutting life. Riveted, head-to-handle compound linkage multiplies hand leverage applied by user. Linkage will not rattle or loosen ever! and an easily adjustable pivot bolt, with nylon locking nut, holds its adjustment securely for these hard-working aviation snips.

• Fast offset cuts in vinyl plastics, layered metal and seams
• Superior cutting life
• Compound linkage multiplies user hand leverage
• Adjustable pivot bolt
• Handles fit large or small hands
• Cuts sharp left angles, straight lines and 5" diameter Circles
• Feature a serrated upper jaw of hardened alloy steel and a forged steel lower jaw to produce a strong, sharply defined cutting edge for superior offset maneuverability and cutting performance
• Extra-long-life compression spring
• Permanent riveted handles will not loosen and latch will not hang up

,
,

Malco T652-4

Malco TY6 Nickel-Chrome Plated Steel High Leverage Tensioning Tool, 8-1/2" L

• Hardened steel stampings
• Tensioning adjustment knob
• Automatic cut-off mechanism The TY6 tensioning tool is designed for a heavy user of nylon ties. An adjustment knob allows installer to set desired tension for securing flex duct to a take-off collar. When the tie is tight, a breakaway spring mechanism releases the tool's lower handle, causing the blade to engage and automatically flush cut off the excess tail of the nylon tie. No extra operation for manual trimming is required. Nylon tie installation is fast and easy with the TY6. Works on all ties including thin designs.,
  ,
  
  

A unique thread design and quality controlled manufacture spell the Zip-In difference. Zip-In's sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of Zip-In's penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-In screws are faster driving, with a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type.

• Head will not strip out of hex driver opening
• Undercut - always seats flush
• Burr free
• Patented head markings U.S. patent number D524638
• Sharp tapered point will not walk, mushroom or break Malco Zip-In HW7x1/2ZT Bright Zinc-Plated Steel Indented Hexagonal Washer Head Self Piercing Screw, #7 x 3", Slotted, 1000/PackSid Harvey Item #:T473-1: Replaces Part #:'s : 13309,
  ,
  
  

Malco T611-82 Pilot Drill Bit Replacement 1/4",
,

Extra long, hardened and tempered alloy steel T Handle hex keys provide extra reach and extra leverage. Plus, vinyl cushion grips and comfort provide added torque.

• Kits are packaged in reusable, clear vinyl pouches with velcro-tab closures
• Red vinyl grips imprinted with sizes make these keys easy to spot on the job and easy to retrieve from your tool kit or tool bag
• Rust resistant finish on hex shafts assures long service life
• Popular 1/8, 5/32 and 3/16" sizes are also available individually
• 9" length cushion grip handle
• 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4" hex key

Sid Harvey Item #:WT9S: Replaces Part #:'s : 30776,
,

Malco 18F Folding Tool, 22 ga Sheet Metal, 18" L

• Folding tool seams are formed from two steel halves, permanently joined together
• Handy sight holes assure proper depth alignment

,
,

Malco 18F

This versatile, compact, multi-socket nut driver is a handy tool for pocket or pouch. It is designed for the trade professional and offers superior performance, ease of use and long service life . Telescoping driver shafts provide two hex sockets at each end of the handle for a total of four hex sizes, 1/4 in, 5/16 in, 3/8 in, and 7/16" The driver shafts can be extended or retracted to produce three different end to end combinations: 1/4 in and 5/16 in; 3/8 in and 5/16 in; and 1/4 in and 7/16" A quick-release, positive lock secures telescoping shafts in position and prevents collapsing when forceful in-line pressure is applied during use. Hardened Chrome Vanadium Steel Sockets offer sure fastener engagement and control. The comfortable 3-lobe handle is made of high-torque ABS plastic, and a non-slip TPR over-molded grip offers additional comfort and control on the job.

• Stores in pocket
• Telescoping hex driver shafts
• 1/4, 5/16, 3/8, 7/16" hex sizes
• Will not collapse under pressure
• Hardened chrome vanadium steel sockets

,
,

Lenox 53497 Hole Saw Arbor,
,