JB Industries A31144 Refrigeration Access Tee

JB Industries A31144

JB Industries A31999-25 Refrigeration Valve Core

JB Industries A31999-25

JB Industries BRZ1000 Steel Nitrogen Purging Braze-Rite Adapter, 4-1/2 Nitrogen purging adapter for ACR pipe. Quickly connects to manifold gauge hose, and slips easily and securely into pipe. Allows for bleed of nitrogen through pipe being brazed, keeping the pipes clean and oxide-free. Stepped to fit most common ACR pipe sizes, making it fast to go from one tube to the next. Saves time and money and helps maintain equipment manufacturers system performance and installation guidelines. No more duct taping your hose to the pipe!.,

JB Industries BRZ1000

JB Industries Kobra CCLV-60 Kevlar High Pressure Charging Hose Set with CLV series hoses feature a ball valve 6" whip end that opens to full flow. Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket. The barbed depressor locks into the gasket, exuding more outward force and pushing the gasket further into place. This depressor is precisely machined for maximum flow and has a dimple that guides the valve core into place. Kobra high pressure hoses are made from Kevlar - the same material that stops bullets in bullet-proof vests. Kevlar makes our hoses strong and flexible, while the nitrile cover extends the life of the hoses better than neoprene. Kobra hoses are made in the USA.Sid Harvey Item #:CCLV-60: Replaces Part #:'s : 41326,
,

JB Industries CCLV-60

JB Industries CCLE-60 Refrigerant Charging Hose Set 1/4"x 60" Red/Yellow/Blue,
,

JB Industries CCLE-60

JB Industries Kobra CCLV-72 High Pressure Charging Hose Set, 1/4, 72" L, 800 psi, Red/Blue/Yellow

• 5 to 1 safety factor
• 1/4 turn lever style ball valve on 6" whip end
• Use rebuild kit 90514
• Use P511 as a replacement gasket
• Use P90514 as replacement depressor

,
,

JB Industries Kobra CCLV-48 High Pressure Charging Hose Set, 1/4, 48" L, 800 psi, Red/Blue/Yellow

• 5 to 1 safety factor
• 1/4 turn lever style ball valve on 6" whip end
• Use rebuild kit 90514
• Use P511 as a replacement gasket
• Use P90514 as replacement depressor

,
,

JB Industries Kobra CCLS-72 High Pressure Charging Hose Set, 1/4" FNPT, 72" L, 800 psi, Red/Blue/Yellow

• 5 to 1 safety factor
• Rebuildable
• Opens to full flow
• Stainless steel thrust washer insures free rotation even under high pressure
• 3-point contact on depressor
• Low loss fitting adapters available
• These hoses are suitable for R-410A and can be used with all common refrigerants except ammonia
• JB also uses a common crimp that grips the full circumference of the hose yielding a maximum hold and uniform seal that prevents leaks and bursts
• Kobra hoses feature a nitrile cover which is better than neoprene because it is more resistant to oil, giving the hoses a longer life
• Use P90022 as replacement o-ring

,
,

JB Industries CCLS-72

Instrument Type R ,
,

JB Industries CCLS60 Charging Hose 1/4" x 5' 3 Pack,
,

JB Industries CCLS60

JB Industries Kobra CCLV4-60 Hose with Ball Valve Whip End, 1/4", 5 CLV series hoses feature a ball valve 6" whip end that opens to full flow. Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket. The barbed depressor locks into the gasket, exuding more outward force and pushing the gasket further into place. This depressor is precisely machined for maximum flow and has a dimple that guides the valve core into place. Kobra high pressure hoses are made from Kevlar - the same material that stops bullets in bullet-proof vests. Kevlar makes our hoses strong and flexible, while the nitrile cover extends the life of the hoses better than neoprene. Kobra hoses are made in the USA.,
,

JB Industries CCLV4-60

Instrument Type R ,
,