ZD10x20TZ Honeywell Home Square Parallel Blade 24 VAC

Honeywell ZD10X20TZ

Equipment Interface Module controls up to 4-stages of heat and 2-stages of cool in a heat pump system and up to 3-stages of heat and 2-stages of cool in a conventional system. Three sets of Universal IAQ contacts to control humidification, dehumidification, and ventilation. Four sensor inputs for wired sensors or dry contact devices.,
,

Resideo Y8610U Intermittent 1 or 2-Rod Natural Gas/LP Pilot Retrofit Kit for Gas-Fired Atmospheric Furnaces, 24 VAC

• Intermittent pilot retrofit kits save energy by converting atmospheric standing pilot systems to intermittent pilot
• Use with natural or LP gas
• Provides 100% pilot gas shutoff if pilot fails to light, after 6 min delay, trial for ignition is repeated
• Ignition trail/delay sequence is repeated until the appliance lights or call for heat is removed
• 2 sec flame failure response time
• 0 or 30 sec pre-purge time
• Ignition sequence - continuous retry, after trial for ignition, pilot gas shuts off for 5 min then another trial for pilot ignition takes place
• Typical gas control - VR8204, VR8304
• Ignition source - internal high voltage spark generator
• Ignition trials to lockout - continuous retry
• 1 amp pilot, 2 amp at 24 VAC maximum valve load
• Q345, Q3451 typical ignition hardware
• 15 or 90 sec lockout timing and ignition trial time
• VR8204, VR8304 typical gas control

Sid Harvey Item #:Y8610U4001: Replaces Part #:'s : MHY8610U4001,
,

Honeywell Home YERM5220R8321/U Programmable Equipment Remote Module with Thermostat, Up to 2 Heat/2 Cool Heat Pump or Conventional, 24 VAC

• The Honeywell Home ERM is like a new cordless tool in your toolbox, pull it out whenever it's too costly or time-consuming to run wires from a condensing unit or boiler to control devices
• There are fewer holes to drill and wires to run, just faster, easier installation that gives you more profit per job, make the Honeywell Home ERM your go-to choice for fast, easy equipment installation
• Eliminates the need to run additional wires to your equipment, for example during a heat pump upgrade
• Suitable for outdoor use
• Temperature sensor terminals for outdoor temp sensors or indoor freeze protection
• LED for easy installation checkout
• May reduce damage to homes since wiring/drilling is eliminated
• Attach the ERM to the wall near the compressor or boiler, the location should be at least 3 feet above ground and oriented with the 2-wire exits facing downward mounting
• ERM compressor, boiler connected LEDs

,
,

Thermostat works standalone or with the THM5421R1021 Equipment Interface Module or with the TrueZONE Wireless Adapter.Smart Schedule - programs in seconds for any lifestyle.Patented interview based programming and installer setup.RedLINK wireless communication.Increase profit per job by including RedLINK accessories that provide comfort and convenience. RedLINK accessories include the RedLINK Internet Gateway, Portable Comfort Control (PCC), Wireless Outdoor Sensor, Wireless Indoor Sensor, Wireless Entry/Exit Remote, Wireless Vent and Filter Boost Remote, TrueSTEAM humidifier with Wireless Adapter and TrueZONE zoning panel with Wireless Adapter.

Selectable for residential and light commercial applications. Meets commercial code and is title 24 compliant.

Light commercial - commercial language (occupied and unoccupied), schedule holidays and custom events, remote setback, economizer and time of day. Remote Setback requires the

THM5421R1021 Equipment Interface Module.

Plain language setup, no manual needed.

Alerts and User Interactions Log - Keeps a searchable history of alerts and setting changes to the thermostat to determine if there is a system malfunction or if the issue was caused by a user error. Saves time in troubleshooting and points the technician in the right direction. The Alert and User Interaction Logs are viewable on a computer after you download them from the thermostat to a microSD card.

Customizable Service Reminders allow dealers to remind their customers when its time to call for service, when their warranty is expiring and to provide customized alerts.

MicroSD port for copying the Installer Setup, Customizable Reminders, Custom Events and Holidays to multiple thermostats.

MicroSD port for adding the dealer's contact information on the screen.

1 assignable output on the TH8321 model to control humidification, dehumidification, ventilation or a stage of heating/cooling.

3 assignable outputs on the Equipment Interface Module to control humidification, dehumidification, ventilation or a stage of heating/cooling. The TH8110 and TH8320 models require the use of a Wireless Indoor Sensor to control humidification and dehumidification.

1 assignable input can be used with a wired outdoor, indoor or discharge sensor.

4 assignable inputs on the Equipment Interface Module can be used with wired outdoor, indoor or discharge sensors, occupancy sensor for remote setback and dry contact devices to

trip pre-packaged or custom alerts such as a full drain pan or water leak.

Extend wireless range of the Equipment Interface Module by connecting a THM4000R1000

Wireless Adapter to the ABCD terminals.

Dual powered - battery or hardwired (C wire).

Precise temperature control (+/- 1° F) for reliable and consistent temperature.

Multiple staging options to provide comfort or energy savings.

TH8110R1008, TH8320R1003, and TH8321R1001 are ENERGY STAR Certified,
,

HONEYWELL YTH8321R1002

Honeywell 107408/U Heat Conductive Compound, 4 oz, Aluminum

,
,

Honeywell 123872A Well Assembly for Aquastat Sensors 1/2"NPT 3/8" x 3" L Shank,

,

Honeywell 123872A

ECR International Heating Parts 14662052 Gas Valve 24 VAC VR8204A2175

Dunkirk Heating Parts 14662051 Gas Valve

Honeywell 203369/U Pre-Filter , 20" x 25"

Sid Harvey Item #:203369: Replaces Part #:'s : L99-212
,
,