Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ 217 - 228 of 1095 ▶|
View:
  • Quiet performance (as low as 74 decibels)*
  • Single-stage compressor operation
  • Durably built to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • 10-Year Parts Limited Warranty+
Item#:
NH4A448AH
Manufacturer Item:
NH4A448AHA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
  • Copeland compressors on all models
  • FilterDrier supplied with every unit for field installation
  • Copper tube / aluminum fin coil
    EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
    BUILT TO LAST
  • Bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • SermaGard® coated cabinet screws
  • Coated inlet grille with 2 spacing standard, alternate models available with  grille spacing for extra protection
  • 5 year limited compressor, coil, and parts warranties
  • Item#:
    N4A336GLB
    Manufacturer Item:
    N4A336GLB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • REFRIGERATION CIRCUIT
  • Environmentally balanced R- 410A refrigerant
  • Copper tube/aluminum fin condenser and evaporator coils
  • Scroll compressor standard on all models
  • Short- cycling protection for the compressor is built into the defrost control board
  • Dehumidification mode (airflow reduction) on all models
  • EASY TO INSTALL AND SERVICE
  • Installs easily on a rooftop or at ground level
  • Easy three- panel accessibility for maintenance and installation
  • Easily converts to down discharge applications
  • Combination electric heating and cooling


    International Comfort Products PHD460000KTP0F

  • Item#:
    PHD460000KTP0F
    Manufacturer Item:
    PHD460000KTP0F
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard

  • Item#:
    RAV048H0FA0AAA
    Manufacturer Item:
    RAV048H0FA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection
  • Item#:
    RGV240LE2A0AAA
    Manufacturer Item:
    RGV240LE2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • The new 3 to 6 ton RHV packaged heat pump rooftop units (RTU) with X-Vane Fan Technology were designed by customers for customers and integrate new technology to provide value added benefits never seen in this type of equipment before.
  • New major design features include:
  • Patented, industrys efficient indoor fan system using Vane Axial fan with electric commutated variable speed motor
  • Reliable, fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes
  • Upgraded unit control board with intuitive indoor fan adjustment
  • Reliable copper tube/aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs
  • New outdoor fan system with rugged  lightweight high impact composite fan blade


    International Comfort Products Commercial RHV048H0FA0AAA

  • Item#:
    RHV048H0FA0AAA
    Manufacturer Item:
    RHV048H0FA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    International Comfort Products Fast Parts
    ION Communication Relay

    Item#:
    SYST0101RM
    Manufacturer Item:
    SYST0101RM
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    International Comfort Products EHK25AHCF Electric Heater 25 KW 230/3 VAC
    Item#:
    EHK25AHCF
    Manufacturer Item:
    EHK25AHCF
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection
  • Item#:
    RGV150LE2A0AAA
    Manufacturer Item:
    RGV150LE2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Environmentally sound R-410A refrigerant
  • Liquid refrigerant filter driers
  • Copper tube/aluminum fin condenser and evaporator coils
  • EASY TO INSTALL AND SERVICE
  • Light weight, compact construction ideal for manufactured housing and residential applications
  • Hand holds built into the unit base pan
  • Compact, fully self-contained, electric cooling unit with horizontal supply and return ducts
  • Easy panel accessibility for maintenance and installation
  • Accessory electric heaters with single point connections
  • Designed to be serviced from both the side and front

  • Item#:
    PHJ430000KTP0A
    Manufacturer Item:
    PHJ430000KTP0A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Environmentally sound R-410A refrigerant
  • Liquid refrigerant filter driers
  • Copper tube/aluminum fin condenser and evaporator coils
  • EASY TO INSTALL AND SERVICE
  • Light weight, compact construction ideal for manufactured housing and residential applications
  • Hand holds built into the unit base pan
  • Compact, fully self-contained, electric cooling unit with horizontal supply and return ducts
  • Easy panel accessibility for maintenance and installation
  • Accessory electric heaters with single point connections
  • Designed to be serviced from both the side and front

  • Item#:
    PHJ436000KTP0A
    Manufacturer Item:
    PHJ436000KTP0A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

  • Item#:
    CAS072HAA0A00A
    Manufacturer Item:
    CAS072HAA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 217 - 228 of 1095 ▶|
    View: