Installation of a spillage safety switch is recommended for LP and natural gas fired systems with draft hoods. This device is installed to detect flue gas spillage caused by a blocked flue system and/or inadequate draft. This device must be installed by a qualified installer in accordance with the manufacturer's installation instructions. Wiring must be in accordance with the National Electrical Code and applicable local codes.

• Efficiently detect flue gas spillage due to a blocked flue, continuous down drafting or inadequate draft condition
• With the safety switch wired in series with the burner circuit, the switch will de-energize the systems burner or burner control once it senses the spillage of hot flue gases
• Gold contact
• Includes (1) 6 feet length of 12/2 jacketed lead wire, (1) 8 feet length of 12 ga jumper wire, (3) adhesive tabs and switch jumper wire and (2) #8 self-drilling sheet metal screws

Sid Harvey Item #:SSK-3: Replaces Part #:'s : x71-204,
,

field controls ssk-3

Field Controls VRV-4 Stainless Steel Vacuum Relief Valve 4",
,

Field Controls 46644001 Steam Humidifier 16 GPD 120 VAC,
,

Tjernlund 46235000 Stainless Steel Universal Replacement Motor Assembly, 6"

• Field Controls 46235000 Stainless Steel Universal Replacement Motor Assembly, 6",
  ,
  
  
  

  Tjernlund SWGII-6RMK

Field Controls PPC-4 Thermal Post Purge Kit for CK-62 Control Kit

,
,

field controls ppc-4

Field Controls 46226200 Synthetic Silicone Super Lube

• Synthetic lubricant which maintains specified viscosity
• Use of any other lubricant may cause premature failure
• This specially designed lubricant provides quality protection for all SWG power venters and other sleeve bearing motors
• Lubricating with SWG Superlube protects the motor at operating temperatures

Sid Harvey Item #:46226200: Replaces Part #:'s : 40174,
,

Field Controls 46282800 Timer Relay W/Fixed Post Purge

• 24 VAC,
  ,
  
  

Field Controls offers a complete line of UV-Aire products for any home or business, with a variety of duct-mounted models designed for forced-air heating and cooling systems. UV-Aire germicidal lamps continuously attack airborne mold, bacteria, and viruses as they circulate through your duct work. As part of the Healthy Home System, the in-duct UV-Aire works with the Healthy Home System Control to ensure PURE air in the home all year round even when not heating or cooling.

• A dual lamp model provides increased potency, useful for larger applications
• Patented angle bracket - angle allows longer lamps to fit into smaller ductwork, maximizing effectiveness, ensures the entire cross section of the duct is irradiated, swivel arm allows for easy lamp replacement
• Duct board mounting kit - makes mounting to duct board simple, designed to increase stability on the duct board
• Hinged cover for easy accessibility
• Includes patented angle bracket and duct board mounting kit
• Installs easily and plugs into a standard 120 volt outlet
• 2 years life efficiency
• Lamp intensity at 1 m - 73 watt/sq-cm
• Includes (1) UV-aire power unit, (4) sheet metal mounting screws, (1) angled mounting bracket, (1) flat mounting bracket, (1) duct board mounting bracket, (1) ultraviolet lamp, (1) instruction sheet, (1) wing nut, caution labels, gasket
• 73 micro-watt/sq-cm lamp intensity

Sid Harvey Item #:UV-18: Replaces Part #:'s : L86-554,
,

Field Controls UV-18

Field Controls offers a complete line of UV-Aire products for any home or business, with a variety of duct-mounted models designed for forced-air heating and cooling systems. UV-Aire germicidal lamps continuously attack airborne mold, bacteria, and viruses as they circulate through your duct work. As part of the Healthy Home System, the in-duct UV-Aire works with the Healthy Home System Control to ensure PURE air in the home all year round...even when not heating or cooling.

• A dual lamp model provides increased potency, useful for larger applications
• Patented angle bracket - angle allows longer lamps to fit into smaller ductwork, maximizing effectiveness, ensures the entire cross section of the duct is irradiated, swivel arm allows for easy lamp replacement
• Duct board mounting kit - makes mounting to duct board simple, designed to increase stability on the duct board
• 2 years life efficiency
• Lamp intensity at 1 m - 62 watt/sq-cm
• Compact design
• Built-In safety switch
• E-Z lamp replacement

Sid Harvey Item #:UV-16/120: Replaces Part #:'s : L87-282,
,

Field Controls offers a complete line of UV-Aire products for any home or business, with a variety of duct-mounted models designed for forced-air heating and cooling systems. UV-Aire germicidal lamps continuously attack airborne mold, bacteria, and viruses as they circulate through your duct work. As part of the Healthy Home System, the in-duct UV-Aire works with the Healthy Home System Control to ensure PURE air in the home all year round...even when not heating or cooling.

• A dual lamp model provides increased potency, useful for larger applications
• Patented angle bracket - angle allows longer lamps to fit into smaller ductwork, maximizing effectiveness, ensures the entire cross section of the duct is irradiated, swivel arm allows for easy lamp replacement
• Duct board mounting kit - makes mounting to duct board simple, designed to increase stability on the duct board
• Hinged cover for easy accessibility
• Includes patented angle bracket and duct board mounting kit
• Installs easily and plugs into a standard 120 VAC outlet
• 2 years life efficiency
• Lamp intensity at 1 m - 37 watt/sq-cm

Sid Harvey Item #:UV-12: Replaces Part #:'s : L86-553,
,

Field Controls UV-12

Field Controls UV-Aire In-Duct Air Purifier 24 VAC Minimum Duct Width 16"

Field Controls UV-Aire TRIO-1000P Activated Charcoal Stage 1 Pre Filter

,
,