Home  > NU-CALGON(x)
|◀ 61 - 72 of 204 ▶|
View:
Nu-Calgon 4120-08 A non-acid, alkaline-based product for brightening and cleaning air-cooled condensers. It contains the best available detergents and surfactants to quickly penetrate and remove greasy soils and oxidation and its foaming helps lift greasy soils out of the coil, leaving equipment clean and bright.,

Nu-Calgon 4120-08

Item#:
4120-08
Manufacturer Item:
4120-08
Manufacturer:
NU-CALGON
Nu-Calgon 4050-06 EasySeal Refrigerant Leak Sealant, 3 oz Pressurized Can, A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The A/C EasySeal circulates through the system with the refrigerant seeking out leaks rather than migrating slowly with the oil keeping in mind that only a small portion of the system oil actually migrates with the refrigerant through the system. A/C EasySeal will react with moisture or air that is naturally present at a leak, forming a secure seal. A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal. A/C EasySeal is a time saver. It finds leaks quickly and seals them, saving the time and money required in searching for the smallest leaks. With A/C EasySeal, the contractor is able to just add a can to the system and be confident the leak has been fixed and move on to the next job.Sid Harvey Item #:4050-06: Replaces Part #:'s : 39783,
,


Nu-Calgon 4050-06

Item#:
4050-06
Manufacturer Item:
40506
Manufacturer:
NU-CALGON
Nu-Calgon 4050-12 EasySeal Direct Inject-UV Dye Refrigerant Leak Sealant, EasySeal direct inject is the strongest sealant on the market, with over a million leaks sealed. With this new injection system, pumping down the unit is a thing of the past. And now the industry's leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal direct inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of the UV Leak Detection Kit (4050-15).,
,


Item#:
4050-12
Manufacturer Item:
4050-12
Manufacturer:
NU-CALGON
Nu-Calgon 4083-75 This highly active solvent blend provides maximum performance in a degreasing solvent without the use of ozone depleters or chlorinated solvents. Powerful blasting spray removes grease, oily dirt and contaminants. This special formula is also suitable for cleaning equipment, tools plus parts and meets or exceeds current OTC VOC requirements. Use Degreasing Solvent LV for Low VOC in California.Sid Harvey Item #:4083-75: Replaces Part #:'s : 4719,

Nu-Calgon 4083-75

Item#:
4083-75
Manufacturer Item:
4083-75
Manufacturer:
NU-CALGON
Nu-Calgon 4126-34 Bio-fresh CD is a ready-to-use bacteriostat, fungistat and deodorizer based upon chlorine dioxide technology. It is recommended for control of bacteria, mold, mildew, fungi and yeast in IAQ applications. Its EPA registration includes application in HVACR ventilating equipment, including coils, condensate pans, filters and duct-work.
  • A concentrated, ready-to-use bacteriostat that is a fungistat and deodorant
  • EPA registered for application in HVACR systems no. 9804-3-65516
  • Can be sprayed in occupied areas
  • Kills odors and controls bacteria
  • Eliminates odors where they exist
Sid Harvey Item #:4126-34: Replaces Part #:'s : 4728,
,



Nu-Calgon 4126-34

Item#:
4126-34
Manufacturer Item:
4126-34
Manufacturer:
NU-CALGON
Nu-Calgon 4050-07 EasySeal direct inject is a new generation of sealants. Its patent pending injection method makes it easier to install than other sealants. With this new injection system, pumping down the unit is a thing of the past. And now the industry's leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal direct inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of a UV light.
  • Strongest sealant on the market
  • Made in the U.S.A.
  • Installs in seconds
  • Precise formula that creates a permanent seal
  • Polymer free
  • OEM approved not to clog manifold gauges
  • Works with all oils and refrigerants
  • Proven not to plug TxVs, cap tubes or pisTons
  • Concentrated formula means less material in system
  • Clear tube so you can see the sealant go in
  • No need to pump down R-410A units
  • No injection hose or caulk gun needed
  • 1-time use
  • Treats 1-1/2 - 5 Ton
,
,


Nu-Calgon 4050-07

Item#:
4050-07
Manufacturer Item:
4050-07
Manufacturer:
NU-CALGON
Nu-Calgon 4050-11 Direct Inject-UV Dye Refrigerant Leak Sealant


Item#:
4050-11
Manufacturer Item:
4050-11
Manufacturer:
NU-CALGON
Nu-Calgon 4060-56 A/C Inject,

Nu-Calgon 4060-56

Item#:
4060-56
Manufacturer Item:
4060-56
Manufacturer:
NU-CALGON
Nu-Calgon 4081-85 CleanVu is a highly effective aerosol cleaner for glass and all hard, non-porous surfaces. Its fast-drying, non-filming formula cleans dirt and grime, providing streak-free shine.,
,


Nu-Calgon 4081-85

Item#:
4081-85
Manufacturer Item:
4081-85
Manufacturer:
NU-CALGON
Nu-Calgon 4087-03 Cold Zinc Spray,
,

Item#:
4087-03
Manufacturer Item:
4087-03
Manufacturer:
NU-CALGON
Nu-Calgon 4300-38 RX11-flush Liquid Starter Kit, Liquid, Clear, Slight Rx11-flush Liquid is a new and improved chemistry that is the next generation in flushing technology. It remains a constant boiling solvent and is now stronger, faster acting and dissolves more oil, moisture and contaminants than any other flush. It is ideal for line sets, burnouts and other flushing requirements. It is sold in a 19.5 fl oz unpressurized can as well as in a Starter Kit, which consists of Rx11-flush Liquid, Rx11-flush Liquid Tank, Rx11-flush 24" Hose, and Rx11-flush Gun.,
,


Item#:
4300-38
Manufacturer Item:
4300-38
Manufacturer:
NU-CALGON
Nu-Calgon 4166-75 Evap-Fresh no rinse is a ready-to-use, non-abrasive, 1-step cleaner and disinfectant for evaporator coils in small air conditioners, commercial air handling equipment, HVAC cooling coils and refrigeration equipment. It is the first product of its kind in the industry to receive EPA registration for such claims. For hard to reach areas, use in conjuntion with 27" talon flexible spray wand.
  • Evap-fresh has been tested effective via AOAC methodology against a wide variety of organisms: salmonella typhi, yersinia enterocolitica, enterococcus faecium, corynebacterium ammoniagenes, methicillin resistant staphylococcus aureus (MRSA), vancomycin resistant enterococcus faecalis, methicillin resistant staphylococcus epidermidis, vancomycin intermediate resistant staphylococcus aureus, pseudomonas aeruginosa, staphylococcus aureus, salmonella choleraesuis, escherichia coli, streptococcus pyogene, listeria monocytogenes
  • Cleans and deodorizes in one easy step
  • EPA registered for the HVAC application
  • Ready to use disinfectant formulation
  • No rinsing required
  • Eliminates odors
  • Cuts dirt and grime
  • Can be used with talon (4776-0)
Sid Harvey Item #:4166-75: Replaces Part #:'s : 35064,
,


Item#:
4166-75
Manufacturer Item:
4166-75
Manufacturer:
NU-CALGON
|◀ 61 - 72 of 204 ▶|
View: