Nu-Calgon 4120-90 Alkabrite Coil Cleaner 1 Quart,
,

Nu-Calgon 4080-04 All Purpose Spray Adhesive, 12 oz Can, Gas, Clear - This advanced formula mist spray adhesive is the one true all purpose adhesive. This unique product utilizes an advanced rubber system to create a product versatile enough for everything from light to heavy duty jobs. Applications for this product can be found throughout general industry for bonding fabric, plastics, felt, cork, paper, corrugated, wood, most metals, and a variety of other materials. It's high heat resistance (over 200 deg F) allows use in a variety of environments including applications in engine compartments, around boilers, air conditioners and quick tack on headliners. This product has a conveniently long open time to allow for repositioning and adjustment when affixing surfaces to be bonded. Another feature is a moderate flow rate spray valve to provide over-spray control in a mist adhesive. The non staining formula is pressure sensitive with fast tack and forms a temporary or the ultimate permanent bond. Formulated with the environment in mind, this product contains no chlorinated solvents, carcinogens, or ozone depleters and cleans up easily with mineral spirits.,
,

Nu-Calgon 4187-15 Clean new or lightly corroded existing systems with Nu-Calgon System Cleaner (4370-08) prior to the installation of Burst-Kontr'l AP-100. Rinse thoroughly. Do not use Burst Kontr'l AP-100 with Galvanized steel. Refer to the dilution chart below to determine how much Burst-Kontr'l AP-100 to use as a percent of system volume to achieve target freeze protection or burst protection.

• Premixed and ready-to-use
• Provides burst protection to -100 deg F and freeze protection to -60 deg F
• Maximum corrosion protection for all metals including aluminum and copper
• Non-toxic and non-corrosive propylene glycol based fluid
• Formulated for optimum heat transfer and maximum fluid life
• Chemical composition includes propylene glycol
• Closed system anti-freeze agent

,
,

Dial Manufacturing F3-21 Belt Dressing 11 oz Aerosol
Especially formulated for V-Belt applications. Formula contains neither asphalt nor rosin. Will not glaze, will not collect dirt - actually cleans belts of accumulations. Ideal for wet, outdoor conditions. Can also be used for leather, rubber, canvas and other fabric belts-flat or round. Perfect for all industrial belt drives.

• Important - do not use on serpentine belts
• Note to use entire contents, hold spray head and rotate can until material sprays Nu-Calgon 4086-03 V-Belt Dressing, 11 oz Can, Aerosol Gas, Colorless - Amber, 0.734 g/mL Specific Gravity,
  ,
  
  
  

  Dial Manufacturing F3-21

Nu-Calgon 4167-08 Eco-Lyme is a new odorless chemistry for the HVAC/R market that provides a unique blend of performance and safety to the environment and user. The product is specially formulated to achieve descaling behaviour of competing hydrochloric acid based descalers. However, the active ingredient is substantially safer on equipment metals. Eco-Lyme is ideal for stainless steel construction - eliminates the issue of localized corrosion/pitting caused by repeated use of hydrochloric acid. Eco-Lyme is readily biodegradable per OECD 301A, a recognized international method for determining biodegradability for applicable chemistry. Eco-Lyme uniquely provides top-tier performance with a validated eco-profile when a 'green' descaler is sought.

• Powerful environmentally friendly descaler
• New chemistry rapidly removes scale and rust - similar in performance to hydrochloric acid (also described as hydrogen chloride)
• Significantly safer on metals than competing hydrochloric acid based descalers
• Safe on carbon steel, aluminum, stainless steel and copper
• Readily biodegradable
• Odorless - making it safer to handle
• Low foaming chemistry for added safety

,
,

Nu-Calgon 4167-08

Nu-Calgon 4167-05 Biodegradable Eco-Lyme Descaler 5 Gallon,
,

Nu-Calgon 4126-34 Bio-fresh CD is a ready-to-use bacteriostat, fungistat and deodorizer based upon chlorine dioxide technology. It is recommended for control of bacteria, mold, mildew, fungi and yeast in IAQ applications. Its EPA registration includes application in HVACR ventilating equipment, including coils, condensate pans, filters and duct-work.

• A concentrated, ready-to-use bacteriostat that is a fungistat and deodorant
• EPA registered for application in HVACR systems no. 9804-3-65516
• Can be sprayed in occupied areas
• Kills odors and controls bacteria
• Eliminates odors where they exist

Sid Harvey Item #:4126-34: Replaces Part #:'s : 4728,
,

Nu-Calgon 4126-34

Nu-Calgon 4050-05 EasySeal direct inject is a new generation of sealants. Its patent pending injection method makes it easier to install than other sealants. With this new injection system, pumping down the unit is a thing of the past. And now the industry's leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal direct inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of a UV light.

• Concentrated formula means less material in system
• Clear tube so you can see the sealant go in
• No need to pump down R-410A units
• No injection hose or caulk gun needed
• 1-time use
• Treats fractional to 1.5 Ton
• Strongest sealant on the market
• Installs in seconds
• Precise formula that creates a permanent seal
• Polymer free
• OEM approved not to clog manifold gauges
• Works with all oils and refrigerants
• Proven not to plug TxVs, cap tubes or pisTons
• New UV dye formula available for detection of larger leaks

,
,

Nu-Calgon 4050-05

Nu-Calgon 4182-08 One of the most important tasks of today's technician is refrigerant management and specifically leak detection. For this job, the technician requires a quality, effective leak detector and Cal-Blue products meet that need. There are 2 formulations in the Cal-Blue product line. Outstanding freeze-protection: 5 deg F. Cal-Blue products are the complete gas leak detector. Not only do they detect the smallest leak, they also provides other significant benefits. The high viscosity formula provides long-lasting bubbles and enables the product to remain in contact with the applied surface for an extended period of time, thereby allowing the smallest of leaks to be detected. It is also non-corrosive to metal and this is a significant feature as it helps to maintain the integrity of piping, tubing and fittings.Sid Harvey Item #:4182-08: Replaces Part #:'s : 4747,
,

Nu-Calgon 4182-24 Cal-Blue Plus Clear Blue Gas Leak Detector, 1 qt Spray One of the most important tasks of today's technician is refrigerant management and specifically leak detection. For this job, the technician requires a quality, effective leak detector and Cal-Blue products meet that need. There are 2 formulations in the Cal-Blue product line. Outstanding freeze-protection: 5 deg F for Cal-Blue Plus and an amazing -20 deg F for Cal-Blue LT. Cal-Blue products are the complete gas leak detector. Not only do they detect the smallest leak, they also provides other significant benefits. The high viscosity formula provides long-lasting bubbles and enables the product to remain in contact with the applied surface for an extended period of time, thereby allowing the smallest of leaks to be detected. It is also non-corrosive to metal and this is a significant feature as it helps to maintain the integrity of piping, tubing and fittings.Sid Harvey Item #:4182-24: Replaces Part #:'s : 4748,

,

Nu-Calgon 4182-24

Nu-Calgon 4182-53 Cal-Blue Plus Clear Blue Gas Leak Detector, 6 oz Bottle One of the most important tasks of today's technician is refrigerant management and specifically leak detection. For this job, the technician requires a quality, effective leak detector and Cal-Blue products meet that need. There are 2 formulations in the Cal-Blue product line. Outstanding freeze-protection: 5 deg F. Cal-Blue products are the complete gas leak detector. Not only do they detect the smallest leak, they also provides other significant benefits. The high viscosity formula provides long-lasting bubbles and enables the product to remain in contact with the applied surface for an extended period of time, thereby allowing the smallest of leaks to be detected. It is also non-corrosive to metal and this is a significant feature as it helps to maintain the integrity of piping, tubing and fittings. Sid Harvey Item #:4182-53: Replaces Part #:'s : 4749

Nu-Calgon 4182-35 Cal-Blue Plus Gas Leak Detector, 7 oz Spray Bottle, Clear Blue One of the most important tasks of today's technician is refrigerant management and specifically leak detection. For this job, the technician requires a quality, effective leak detector and Cal-Blue products meet that need. There are 2 formulations in the Cal-Blue product line. Outstanding freeze-protection: 5 deg F. Cal-Blue products are the complete gas leak detector. Not only do they detect the smallest leak, they also provides other significant benefits. The high viscosity formula provides long-lasting bubbles and enables the product to remain in contact with the applied surface for an extended period of time, thereby allowing the smallest of leaks to be detected. It is also non-corrosive to metal and this is a significant feature as it helps to maintain the integrity of piping, tubing and fittings.

• High viscosity formulation to enhance contact time
• Long-lasting bubbles
• Non-corrosive to metals
• Will not affect ultraviolet (black) lights One of the most important tasks of today's technician is refrigerant management and specifically leak detection. For this job, the technician requires a quality, effective leak detector and Cal-Blue products meet that need. There are 2 formulations in the Cal-Blue product line. Outstanding freeze-protection: 5 deg F. Cal-Blue products are the complete gas leak detector. Not only do they detect the smallest leak, they also provides other significant benefits. The high viscosity formula provides long-lasting bubbles and enables the product to remain in contact with the applied surface for an extended period of time, thereby allowing the smallest of leaks to be detected. It is also non-corrosive to metal and this is a significant feature as it helps to maintain the integrity of piping, tubing and fittings.,
  ,