S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Nu-Calgon 4364-88 Season treat inhibits scale formation by holding the scale forming minerals in solution long enough to be carried away through the bleed off. It also forms a microscopic, thin protective film on metal surfaces to reduce corrosion. Because of 6R Micromet's consistent slow dissolve rate, it achieves a uniform concentration of treatment over a long period of time. When the product is about 2/3 dissolved, which should be in about 6 months of operation with average water temperatures, discard the remaining canister or charge of 6R micromet and add a new charge.
- A season treat canister will last about 6 months in 75 deg F water
- Keeps equipment operating at designed capacity
- Prevents scale caused breakdowns
- Reduces maintenance and need for acid cleaning
- Prolongs equipment life
- Low cost treatment
- One charge lasts 5 - 6 months
Nu-Calgon 4364-88
Nu-Calgon 4771-20 Chemical Sprayer 2 Gallon
Nu-Calgon 4771-20
Nu-Calgon 4371-36 Thermo-Trap Heat Absorbing Paste, 11 oz Tube, Gray to Technically, Thermo-Trap is referred to as a heat sink. This means that it has an extremely high capacity for absorbing heat. Applied to the metal working surface between the area being heated and the material to be protected, Thermo-Trap soaks up heat and reduces heat transfer. This keeps heat from spreading beyond the work area. Heat-sensitive components, installed fittings, etc., on the other side of Thermo-Trap stay cool and are not damaged by transmitted heat.
Nu-Calgon 4371-36
Nu-Calgon 4774-0 For spraying coil cleaners such as Nu-Brite, CalClean, HD CalClean, Alka-Brite Plus, Tri-Pow'r HD or any of the other quality Nu-Calgon coil cleaners for cleaning air cooled condensers, evaporator coils, etc. No pre-mixing is necessary as chemical and water are automatically blended in mixing head as you spray. Use for coil cleaning as well as in food preparation areas, wash rooms, or any situation where use of water-diluted chemicals are required.
- The coil gun probe provides easy access for inside out cleaning of coils
- Recommended water pressure 40 - 60 psi
- Quick-disconnect feature
- Foam wand to enhance foaming
- Deflector tip to fan out spray
- Connects to optional coil gun probe accessory (4774-1) for 90 deg direction of spray inside the coil
Nu-Calgon 4774-0
Nu-Calgon 4371-75 Tri-Pow'R Aerosol 19 oz AEROSOL,
Nu-Calgon 4371-75
Nu-Calgon 4603-01 Acid Pump 115 VAC 31-Tx1,
Nu-Calgon 4603-01
Item#:
4603-01
Manufacturer Item:
4603-0
Manufacturer:
NU-CALGON
Nu-Calgon 4776-0 The Talon Flexible Aerosol Wand is a specially developed 27" length accessory to be used exclusively with Nu-Calgon's Evap Foam No Rinse, Blackhawk and PenetrateHD aerosol products. The device provides precision spraying in tough-to-reach locations, especially when injecting product into a small opening. The reusable Talon is highly flexible yet has shape memory when navigating around equipment components or cabinetry to spray. The Talon is developed for Nu-Calgon's Evap Foam No Rinse and Blackhawk aerosol-based coil cleaners or applying Penetrate HD, a super penetrating lubricant, in tough-to reach locations. The Talon Flexible Aerosol Wand provides precision spray control in field situations where it's simply difficult to fit/orientate the aerosol canister by itself around existing obstructions. In addition, with better spray control in tough-to-reach locations, there is less unwanted product waste on adjacent surfaces. The Talon is a must have service tool
Nu-Calgon 4776-0
Honeywell Home 50028044-001 In-Line Water Filter for Steam and Evaporative Humidifiers
Honeywell 50028044-001
Item#:
50028044-001
Manufacturer Item:
50028044-001
Manufacturer:
NU-CALGON
Nu-Calgon 4900-35 iWave-M Air Purifier for Ductless HVAC Systems up to 1,600 CFM
Nu-Calgon 4900-35
Nu-Calgon 4900-35
Nu-Calgon 4900-35
Nu-Calgon 4900-20 I-Wave-r Air Purifier 2,400 CFM
With technology installed in over 100,000 applications, iWave-R is the worlds first self-cleaning, no maintenance needlepoint bi-polar ionization generator designed specifically for treating air in residential duct A/C systems. As the air flows past the iWave-R, positive and negative ions actively purify the supply air, killing mold, bacteria and viruses in the coil and living space. The ionization process also reduces allergens, smoke and static electricity, as well as controlling odors (cooking, pet, VOCs) and other particles (no more sunbeams) in the air without creating ozone or any harmful byproducts. iWave-R treats the air in any brand of residential duct air conditioning systems up to 6 Tons (2400 CFM) in size with no maintenance and no replacement parts. Designed for universal mounting, the iWave-R typically requires only 15 minutes to install inside or outside of duct, or to attach magnetically near the indoor fan in the air handler. Simply connect to power using its patent-pending Voltage input capability. Install between air filter and cooling coil to treat the indoor coil; as an alternative, the iWave-R can be installed in the supply air. iWave-R always works at peak performance, producing over 160 million ions/cc, more than any other ionizer product on the market. Its patent-pending self-cleaning design includes a programmable cleaning cycle that can clean the emitter brushes every 1, 3, 5 or 10 days. The iWave-R is factory set to clean every third day which is adequate for a typical installation. iWave-R does not create black walls as negative-only ionizer products will do.
Nu-Calgon 4900-20
With technology installed in over 100,000 applications, iWave-R is the worlds first self-cleaning, no maintenance needlepoint bi-polar ionization generator designed specifically for treating air in residential duct A/C systems. As the air flows past the iWave-R, positive and negative ions actively purify the supply air, killing mold, bacteria and viruses in the coil and living space. The ionization process also reduces allergens, smoke and static electricity, as well as controlling odors (cooking, pet, VOCs) and other particles (no more sunbeams) in the air without creating ozone or any harmful byproducts. iWave-R treats the air in any brand of residential duct air conditioning systems up to 6 Tons (2400 CFM) in size with no maintenance and no replacement parts. Designed for universal mounting, the iWave-R typically requires only 15 minutes to install inside or outside of duct, or to attach magnetically near the indoor fan in the air handler. Simply connect to power using its patent-pending Voltage input capability. Install between air filter and cooling coil to treat the indoor coil; as an alternative, the iWave-R can be installed in the supply air. iWave-R always works at peak performance, producing over 160 million ions/cc, more than any other ionizer product on the market. Its patent-pending self-cleaning design includes a programmable cleaning cycle that can clean the emitter brushes every 1, 3, 5 or 10 days. The iWave-R is factory set to clean every third day which is adequate for a typical installation. iWave-R does not create black walls as negative-only ionizer products will do.
- Patent pending self-cleaning design ensures ongoing peak performance
- Needle point ionization actively treats air in the living space
- Easily installs in minutes in A/C system
- Universal mounting with magnets
- Flexible design with no replacement parts
- Kills mold bacteria and viruses
- Reduces allergens, odors, smoke, static electricity and other airborne particles
- Reduces ventilation requirements
- Keeps coil cleaner
- Programmable cleaning cycle
- Alarm contact option for secondary notification
- Duct systems upto 6 Tons (2400 cfm)
- 3 years warranty
Nu-Calgon 4900-20
Nu-Calgon 4900-20
Nu-Calgon 4900-10 I-Wave Air Purifier 4,800 CFM
With technology installed in over 100,000 applications, iWave-R is the worlds first self-cleaning, no maintenance needlepoint bi-polar ionization generator designed specifically for treating air in residential duct A/C systems. As the air flows past the iWave-R, positive and negative ions actively purify the supply air, killing mold, bacteria and viruses in the coil and living space. The ionization process also reduces allergens, smoke and static electricity, as well as controlling odors (cooking, pet, VOCs) and other particles (no more sunbeams) in the air without creating ozone or any harmful byproducts. iWave-R treats the air in any brand of residential duct air conditioning systems up to 6 Tons (2400 CFM) in size with no maintenance and no replacement parts. Designed for universal mounting, the iWave-R typically requires only 15 minutes to install inside or outside of duct, or to attach magnetically near the indoor fan in the air handler. Simply connect to power using its patent-pending Voltage input capability. Install between air filter and cooling coil to treat the indoor coil; as an alternative, the iWave-R can be installed in the supply air. iWave-R always works at peak performance, producing over 160 million ions/cc, more than any other ionizer product on the market. Its patent-pending self-cleaning design includes a programmable cleaning cycle that can clean the emitter brushes every 1, 3, 5 or 10 days. The iWave-R is factory set to clean every third day which is adequate for a typical installation. iWave-R does not create black walls as negative-only ionizer products will do.
With technology installed in over 100,000 applications, iWave-R is the worlds first self-cleaning, no maintenance needlepoint bi-polar ionization generator designed specifically for treating air in residential duct A/C systems. As the air flows past the iWave-R, positive and negative ions actively purify the supply air, killing mold, bacteria and viruses in the coil and living space. The ionization process also reduces allergens, smoke and static electricity, as well as controlling odors (cooking, pet, VOCs) and other particles (no more sunbeams) in the air without creating ozone or any harmful byproducts. iWave-R treats the air in any brand of residential duct air conditioning systems up to 6 Tons (2400 CFM) in size with no maintenance and no replacement parts. Designed for universal mounting, the iWave-R typically requires only 15 minutes to install inside or outside of duct, or to attach magnetically near the indoor fan in the air handler. Simply connect to power using its patent-pending Voltage input capability. Install between air filter and cooling coil to treat the indoor coil; as an alternative, the iWave-R can be installed in the supply air. iWave-R always works at peak performance, producing over 160 million ions/cc, more than any other ionizer product on the market. Its patent-pending self-cleaning design includes a programmable cleaning cycle that can clean the emitter brushes every 1, 3, 5 or 10 days. The iWave-R is factory set to clean every third day which is adequate for a typical installation. iWave-R does not create black walls as negative-only ionizer products will do.
- Patent pending self-cleaning design ensures ongoing peak performance
- Needle point ionization actively treats air in the living space
- Easily installs in minutes in A/C system
- Universal mounting with magnets
- Flexible design with no replacement parts
- Kills mold bacteria and viruses
- Reduces allergens, odors, smoke, static electricity and other airborne particles
- Reduces ventilation requirements
- Keeps coil cleaner
- Programmable cleaning cycle
- Alarm contact option for secondary notification
- Duct systems upto 6 Tons (2400 cfm)
- 3 years warranty,
Nu-Calgon 4900-10