Nu-Calgon 4296-51 Pan-Spray Condensate Pan Leak Sealer, 16 oz Can, Gas, Pan-Spray is an effective, easy-to-use water proof rubberized coating that won't chip, flake, or peel. It's ideal for sealing out rust and corrosion as well as repairing leaky condensate pans, cooling towers, swamp coolers, roofing, gutters, and down spouts. Pan Spray is the perfect solution for emergency and permanent repair. It is a quick, easy and economical repair on troublesome leaks. Use on condensate pans, swamp coolers, humidifier pans, plumbing and pipe fixtures, roofing, downspouts or gutters.

Nu-Calgon 4296-51

Nu-Calgon 4300-09 RX11-flush is a unique solvent that has been engineered for flushing refrigeration and air conditioning systems. Its patented HFC based solvent formulation is powerful enough to flush away sludge, carbon residue, oils, acids, water and other particulate. This makes it ideal for system flushing after burnouts, retrofits and for flushing line sets for R-410A conversions. It is non-toxic, non-flammable and is non-ozone depleting. From time to time, refrigeration and air conditioning systems suffer failures which result in contamination. The most common such failure is a compressor burnout. During such an event, the refrigeration system becomes contaminated with large quantities of unwanted particulate, sludge, acids, carbon residues and possibly moisture. All of these contaminants must be removed before the system can be returned to duty.

Nu-Calgon 4300-09

Nu-Calgon 4311-07 Refrigeration Oil 1 Gallon ZEROL 300 ALKYLBENZENE

Nu-Calgon 4311-07

Everpure Nu-plus nu-i4 Water Filter Cartridge, 12 Gallon, 1/2 micron, 1.67 gpm

New and improved Micro-Pure II media with AgION antimicrobial protection inhibits any potential bacterial growth
• Reduces water-related ice machine problems caused by scale build-up from dirt and dissolved minerals
• Reduces chlorine taste and odor and other offensive contaminants
• Self-contained scale inhibitor feed keeps ice machines functioning at full capacity
• Reduces maintenance and service costs by reducing scale and clogging of distribution lines, evaporator plate and pump
• Precoat submicron technology reduces dirt and particles as small as 1/2 micron in size and reduces health contaminants such as asbestos fibers and cryptosporidium and giardia cysts
• Sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination
• Scale reduction/control as tested by Everpure
• Bacteriostatic
• Particulate reduction
• Premier 6R micromet scale control
• 1 lb most cubers
• 2 lb most flakers
• nu-i42 packing size
  

  Everpure 4621-11

Nu-Calgon 4366-24 Scrubs-in-a-Bucket Multi-Purpose Hand Cleaning Towel, Scrubs-In-A-Bucket works fast to remove embedded grime, grease and dirt while conditioning and softening hands at the same time. It was especially designed for HVACR and plumbing professionals for on the job hand cleaning needs. The effectiveness of pumice soap in a one-step, premoistened towel allows you to use scrubs hand cleaner towels anywhere, anyplace, anytime.

Nu-Calgon 436624

Nu-Calgon 4297-75 Pipe-Dri is an aerosol insulation which provides a moisture barrier to stop sweating and dripping on refrigeration lines, air conditioning lines, and other cold surfaces. Quickly adheres and dries to a hard water proof coating. Pipe-Dri's spray pattern permits spraying of odd shaped fittings and makes it possible to insulate hard to reach areas. Sweating and dripping are eliminated by this durable, waterproof protective barrier. It separates the warm moist air and the cold surface, preventing condensation from occurring. Pipe-Dri offers the ability to apply on odd shaped fittings and hard to reach areas. Reapplication will continue to build thickness as required. One can will normally cover approximately ten feet of 1" water pipe or eight square feet of flat surface area with two coats. Ideally, the product should be at room temperature (70- 75 deg F) and the surface to be coated at a lower temperature. A thick application is hard to form on warmer surfaces (above 80 deg F), however, a thicker coat may be achieved by applying 2 or more light coats. Once a coating has been allowed to dry and harden, it will be stable at temperatures up to 120 deg F.

Nu-Calgon 4297-75

Nu-Calgon 4295-34 PanPads Condensate Pan Treatment, 3/4 oz, Light Brown Contents

• Integral part of the clean coil program
• Treats up to 5 Ton
• Control slime build-up, eliminating overflow of condensate pans
• Control the growth of harmful bacteria, including those causing legionnaire's disease
• Eliminate objectionable or musty odors caused by bacterial slime build-up
  

  Nu-Calgon 4295-34

Nu-Calgon 4299-T8 Pump Protector, 10 oz Spray Can, Colorless Foam-in shut down corrosion protection for all types of pumps any pump that is shut down and drained part of the time should be safeguarded with aerosol pump protector. Pumps used in cooling towers, swimming pools and vacation homes, auxiliary pumps, marine and industrial pumps can develop corrosion deposits on the impeller and other close-tolerance areas during shut down, causing the pump to bind. Aerosol pump protector prevents this corrosion and lubricates the pump so that it starts right up every time! pump protector is water soluble and will not cause any foaming problem when the pump is started. If the pump is used for drinking water, flush it thoroughly by running water off a few minutes before placing the pump back in service. Protects seasonally operated pumps against corrosion during shutdowns by"winterizing" them. When corrosion occurs in close-tolerance areas, it can cause the impeller to stick or bind. Protect your clients investment and your reputation! Safe for all types of water pumps and it requires no special rinsing at start-up.

• Protects against corrosion and ends-pump impeller binding
• Convenient aerosol package
• Safe for all types of water pumps
• One can is enough for most pumps
• Requires no special rinsing at startup
• Protects pool pumps throughout the winter
• This product has been authorized by the USDA for use in federally inspected meat and poultry plants
• 95% volatile
• Level 1 heat of combustion
• 13 cm flame height, 4 - 5 sec flammability duration Foam-in shut down corrosion protection for all types of pumps any pump that is shut down and drained part of the time should be safeguarded with aerosol pump protector. Pumps used in cooling towers, swimming pools and vacation homes, auxiliary pumps, marine and industrial pumps can develop corrosion deposits on the impeller and other close-tolerance areas during shut down, causing the pump to bind. Aerosol pump protector prevents this corrosion and lubricates the pump so that it starts right up every time! pump protector is water soluble and will not cause any foaming problem when the pump is started. If the pump is used for drinking water, flush it thoroughly by running water off a few minutes before placing the pump back in service. Protects seasonally operated pumps against corrosion during shutdowns by"winterizing" them. When corrosion occurs in close-tolerance areas, it can cause the impeller to stick or bind. Protect your clients investment and your reputation! Safe for all types of water pumps and it requires no special rinsing at start-up.
  

  Nu-Calgon 4299-T8

Nu-Calgon 4316-46 Emkarate Refrigeration Lubricant, 1 Gallon Can, Mild, The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with base fluids that are specifically formulated to deliver optimum performance with minimal additive levels. The requirements of today's refrigeration and air conditioning compressor lubricants are complex. They must be compatible and miscible with the HFC refrigerants, and they must be compatible and miscible with CFC's and HCFC's as well as mineral and alkylbenzene oils. Polyol ester lubricants meet these needs, and the EMKARATE RL line is the preferred choice. Working in close collaboration with compressor and system manufacturers, these OEM-approved POE lubricants cover a wide viscosity range from 7 cSt (35-40 SUS) to 220 cSt (1100 SUS) to suit most applications. The lubricants have excellent thermal and chemical stability, and are compatible with a wide range of elastomers, polymeric materials and other materials of construction. Additionally, then higher viscosity index is an indication that their effective viscosity will not change drastically with the wide swings in temperature seen by most typical refrigeration and air conditioning systems. They are the preferred choice for servicing and retrofitting existing equipment as well as for OEM charging.

Nu-Calgon 4316-46

Nu-Calgon 4330-08 Liquid scale dissolver line-up is the industry's most trusted solution for descaling and cleaning cooling tower. It provides unmatched features such as a built-in pH color indicator, superior low foam characteristics in a fast action cleaner. It provides unmatched features such as a built-in pH color indicator, superior low foam characteristics in a fast action cleaner.

Nu-Calgon 4330-08

Nu-Calgon 4293-04 HVACR Expanding Foam 12 oz

Nu-Calgon 4293-04

Nu-Calgon 4371-88 The ideal environmentally friendly and biodegradable cleaner that's perfect for cleaning air-cooled condensers, evaporator coils, permanent filters, fan blades, motors and other general cleaning needs. Tri-Pow'r HD is a heavy duty alkaline cleaner that is very unique when compared to other similar alkaline coil cleaners. It's based upon positive emulsion technology which is the most effective technology used for removing grease and grime. Tri-Pow'r HD emulsifies or converts greasy deposits into a fluid or liquid form that can be easily flushed. It also contains a surfactant for"wetting" the greasy deposits as well as corrosion inhibitors for protecting equipment surfaces. It's non-acid, non-toxic, biodegradable and very safe to use and it's a deodorizer as well.

Nu-Calgon 4371-88