The A/C drain sucker quickly and easily repairs A/C condensate drain pan clogs and overflows by sucking the clog from the outside or pushing it from the inside. A/C condensate drain pan overflows are a very common and costly service problem. The A/C drain sucker kit includes the pump and fittings required to easily remove the slime and sludge clog and any excess water. It also includes PurCool shock tabs to clean the drain pan and drain lines and a PurCool pan strip for long lasting drain pan treatment to prevent future slime and sludge build-up. The A/C drain sucker pump does not require expensive CO2 cartridges or nitrogen. It is economical and can be used over and over again without additional cost. It is lightweight and easy to use but provides powerful suction or discharge pressure to remove clogs and get condensate drain pans flowing again. Turns a troublesome service call into an easy and profitable call without expensive callbacks. Untreated A/C condensate drain pans are a great place for slime and sludge to grow. In time, the sludge builds up and clogs the drain outlet in the pan or the drain line itself. This forces the condensate water to overflow and cause expensive damage to ceilings, walls and floors. The only way to resolve this problem is to remove the clog with suction or pressure to get the water flowing through the drain again. The A/C drain Sucker can be used to provide suction or pressure to remove these clogs. Besides causing clogs and expensive overflows, the slimes and sludge can be unhealthy and cause odors. Condensate drain pan treatment products should be used to prevent these problems in the first place. Purcool pan strips can be placed in the condensate drain pan once a year to prevent slime and sludge build-up to keep drain pans clean and free flowing. The condensate treatment products included with the A/C drain sucker kit can be used to clean up the drain pan and lines and to provide long term treatment and prevention of this problem.

• Easily clears clogs from a/c condensate drain lines with suction from outside or pressure from inside
• No costly CO2 cartridges or nitrogen needed, use the A/C drain sucker over and over again
• All fittings and hoses included
• Kit includes PurCool shock tabs and PurCool pan strip to clean pan and prevent future clogs, drain sucker and hoses, all fittings for suction or pressure applications

,
,

ClenAir CADS1

Nu-Calgon 4301-02 RX-Acid scavenger provides a better, more convenient way to neutralized or scavenge acid in refrigeration, air conditioning systems after burnouts or during normal on-going systems maintenance. Normal dosage rate is 2 fl oz of Rx-acid scavenger for up to 1 Gallon of system oil. That is 50% less than other acid neutralizing products. This low treat feature means far less material has to be added to the systems. Rx-acid scavenger is formulated for use with all lubricants - mineral, alkylbenzene and polyolester. Use after system burnout to scavenge acid products in the system or change a system with Rx-acid scavenger to neutralize acid conditions should they develop.

Nu-Calgon 4603-01 Acid Pump 115 VAC 31-Tx1,
,

Nu-Calgon 4051-99 A/C Piercing Valve W/Hose (Easy Dry),
,

Nu-Calgon 4057-56 A/C Re-New has been successfully used for many years to improve the performance of air conditioning systems. A/C Re-New provides significant savings in energy use, quiets noisy systems, extends the life of systems, and resolves sticking reversing valves and TEVs due to friction. It is a lubricant that blends with the systems oil, lasting for the life of the equipment, or until the oil is changed. In recent years, A/C Re-New has been successfully used to aid in existing oil migration when retrofitting an R-22 air conditioning system with a near drop-in refrigerant; examples include R-427A and R-407C and others. A/C Re-New not only helps with oil return at retrofit, but also comprehensively renews the air conditioner by reducing friction in the compressor (lowers amp draw), quiets the system and can aid in sticking flow control valves because of friction due to years of service.,
,

Nu-Calgon 4057-56

Nu-Calgon 4057-99 The A/C Re-New Injector was designed to inject A/C Re-New into air conditioning and refrigeration systems. It has a capacity of 4 fl. oz. and can be used for other injectable products as well, including amounts less than the 4 fl. oz. capacity. It is constructed of rugged aluminum and has a maximum working pressure of 600 psi. It has a Schrader fitting at one end and a short length of hose with a ball valve on the other end.

Nu-Calgon 4779-0 The A/C Re-New Injector was designed to inject A/C Re-New into air conditioning and refrigeration systems. It has a capacity of 4 fl. oz. and can be used for other injectable products as well, including amounts less than the 4 fl. oz. capacity. It is constructed of rugged aluminum and has a maximum working pressure of 600 psi. It has a Schrader fitting at one end and a short length of hose with a ball valve on the other end.,
,

Nu-Calgon 4057-55 A/C Re-New, formerly Zerol Ice, has been used successfully for many years to improve the performance of air conditioning and refrigeration systems. A/C Re-New provides significant saving in energy use. It also quiets noisy systems and extends the life of the system. It is a lubricant that blends with the system's oil, lasting for the life of the equipment, or until the oil is changed.

• Quiets noisy compressors
• Reduces energy consumption, lowers starting and running amps
• Frees sticking thermostatic expansion valves and reversing valves
• Great for new and old systems
• Revitalizes and energizes air conditioning systems
• For use with model R-22, R-410A as well as other refrigerants

,,

Nu-Calgon 4057-55

Nu-Calgon 4060-56 A/C Inject,

Nu-Calgon ACS12 A/C Shine Cleaner,
,

Nu-Calgon ACS12

Nu-Calgon 4108-P2 No. 85 Algaecide, is a polymeric, cationic biocide that has been developed for controlling the growth of algae, bacteria, and fungi in recirculating water systems such as cooling towers, evaporative condensers, closed cooling water systems and industrial air-washing systems. Algae are microscopic plants that grow rapidly in cooling towers, spray ponds and other recirculating systems exposed to sunlight. These free-floating growths can be carried to the condenser or heat exchanger by the condenser or heat exchanger by the recirculating water where they lodge and act as binders for sludge and suspended matter. In addition, algae can contribute to the formation of slime deposits by providing organic matter necessary for the growth of bacteria. These biological growths restrict water flow, reduce heat transfer efficiency and increase head pressures, all of which result in lower efficiency and increased power and service costs. Treatment of recirculation water with No. 85 Algaecide prevents growths of algae and bacteria from developing to the point where they cause the problems described.

• Controls the growth of algae, bacteria, and fungi in recirculating water systems
• Can be slug fed, drip fed or fed with a chemical solution pump
• Effective in both alkaline and acid waters
• Does not cause foam like most algaecides
• Non-volatile

,
,

Nu-Calgon 4120-08 A non-acid, alkaline-based product for brightening and cleaning air-cooled condensers. It contains the best available detergents and surfactants to quickly penetrate and remove greasy soils and oxidation and its foaming helps lift greasy soils out of the coil, leaving equipment clean and bright.,