Fujitsu FH4821TPSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

• 48K BTU 4 Ton
• 115/1 VAC
• 21" Wide
• PSC Motor
• Multi-Position,
  ,
  
  
  

  FUJITSU FH4821TPSJSN

Fujitsu FH4821TPSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

• 48K BTU 4 Ton
• 208/230/1 VAC
• 21" Wide
• Multi-Position,
  ,
  
  
  

Fujitsu FH6024TPSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

FUJITSU FH6024TPSJSN

Fujitsu FH6024TTSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

Fujitsu FH6024TTSJSN

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.

Fujitsu ARUX36TLAV2 Air Handler VRF 36K BTU 208/230/1,
,

Fujitsu Airstage ARUX36TLAV2

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.

Fujitsu AOUA120RLBV1 Airstage Condenser Heat Pump Cool 120k BTU 135k BTU Heat 208/3 VAC,
,

Fujitsu AOUA120TLBV Airstage Condenser Heat Pump Cool 120k BTU 135k BTU Heat 208/3 VAC R410A VRF

• Power source Phase 3-phase
• Voltage 208 / 230 V
• Frequency 60 Hz
• Capacity Cooling 120,000 BTU/h
• 35.2 kW
• Heating 135,000 BTU/h
• 39.6 kW
• Input Power Cooling 9.75 kW
• Heating 10.11 kW
• EER (Non-Ducted/Ducted) Cooling 11.3 / 11.3 Btu/hW
• IEER (Non-Ducted/Ducted) Cooling 23.8 / 20.1 Btu/hW
• COP (Non-Ducted/Ducted) Heating 3.61 /3.49 W/W
• SCHE (Non-Ducted/Ducted) 25.4 / 25.8 Btu/hW
• Air Flow Rate 7,652 CFM (13,000 m/³h)
• Sound Pressure Level*2 Cooling 61 dB(A)
• Heating 62 dB(A)
• Maximum external static pressure 0.32 in.WG (80 Pa)
• Compressor motor output 11.0 kW
• Net Dimensions Height 66-9/16" (1,690 mm)
• Width 48-13/16" (1,240 mm)
• Depth 30-1/8" (765 mm)
• Net Weight 639 lbs (290 kg)
• Refrigerant Type R410A
• Charge 26.01 lbs (11.8 kg)
• Connection Pipe Diameter Liquid 1/2" (12.70 mm)
• Discharge Gas 3/4" (19.05 mm)
• Suction Gas 1-1/8" (28.58 mm)
• Operation Range Cooling 14 to 115 °FDB (-10 to 46 °CDB)
• Heating -4 to 70 °FDB (-20 to 21 °CDB),
  ,
  
  

Fujitsu AOUA72RLBV1 Airstage Condenser Heat Pump Cool 72k BTU 81k BTU Heat 208/3 VAC R410A VRF

• Power source Phase 3-phase
• Voltage 208 / 230 V
• Frequency 60 Hz
• Capacity Cooling 72,000 BTU/h
• 21.1 kW
• Heating 81,000 BTU/h
• 23.7 kW
• Input Power Cooling 5.37 kW
• Heating 5.39 kW
• EER (Non-Ducted/Ducted) Cooling 12.5 / 12.3 Btu/hW
• IEER (Non-Ducted/Ducted) Cooling 24.1 / 20.0 Btu/hW
• COP (Non-Ducted/Ducted) Heating 4.06 / 3.64 W/W
• Air Flow Rate 6,533 CFM (11,100 m/³h)
• Sound Pressure Level*2 Cooling 57 dB(A)
• Heating 58 dB(A)
• MaXimum eXternal static pressure 0.32 in.WG (80 Pa)
• Compressor motor output 7.5 kW
• Net Dimensions Height 66-9/16" (1,690 mm)
• Width 36-5/8" (930 mm)
• Depth 30-1/8" (765 mm)
• Net Weight 564 lbs (256 kg)
• Refrigerant Type R410A
• Charge 25.79 lbs (11.70 kg)
• Connection Pipe Diameter Liquid 1/2" (12.70 mm)
• Discharge Gas 7/8" (22.22 mm)
• Operation Range Cooling 5 to 115 °FDB (-15 to 46 °CDB)
• Heating -4 to 70 °FDB (-20 to 21 °CDB),
  ,