Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

Armacell BST11810 Pipe Insulation with Lap Seal 1-1/8" x 1" x 6' Microban Antimicrobial, Closed-Cell Foam Polyethylene foam pipe insulation. Its closed cell structure won't wick moisture and helps prevent the absorption of condensation that could cause mold to develop over time. Imcoa SS has an easy to install self seal closure system. Imcoa pipe insulation is semi-slit, and can be completely slit by hand. Imcoa SS is pre-slit with a factory applied pressure sensitive adhesive (PSA) to both seam surfaces and has a release liner for easy installation. All butt joints should be properly sealed. Imcoa and Imcoa SS are easy to cut with a knife and can be fabricated to go around p-traps and fittings.

• CFC/HCFC free
• Non-porous
• Low VOCs
• Halogen free
• Fiber free
• Resistant to mold growth

,
,

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

Bramec 18482 Yellow Gas Line Thread Seal Tape 1/2" W x 260" L 4 Mil PTFE

K-Flex 801P100058 K-Flex P-Trap 5/8" x 1" K-Fit P-Traps are specially designed to insulate piping systems that are comprised of a tailpiece, curved trap piece and a drain elbow. The factory-made fittings deliver easy installation, a compression fit and reliable performance.

• Uniformity, good fit and watertight seams
• Non-porous, non-fibrous and resist mold growth and are environmentally friendly and CFC free
• Quicker installation
• Great fit
• UV resistant
• Thermal insulation

,
,

K-Flex 801LRE100258 K-Flex Black Long Radius 90 Degree Elbow Cover 2-5/8" x 1" K-Flex K-Fit Black NBR/PVC Cell and Flexible Elastomeric K-Fit fittings are factory-fabricated fittings made from NBR/PVC-based closed cell, flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water-tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, funGallon and bacterial growth. They are UL GREENGUARD Gold Certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,
,

K-Flex 801T068138 K-Flex Tee 1-3/8" x 3/4" K-Flex K-Fit 801-T-068138 Black NBR or PVC Tee Pipe Insulation, 1-3/8 K-Fit fittings are factory fabricated fittings made from NBR/PVC based closed cell, flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, funGallon and bacterial growth. They are UL Greenguard Gold certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,
,

K-Flex 801LRE068158 K-Flex Black Long Radius 90 Degree Elbow Cover 1-5/8" x 3/4" K-Flex K-Fit Black NBR/PVC Cell and Flexible Elastomeric K-Fit fittings are factory-fabricated fittings made from NBR/PVC-based closed cell, flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water-tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, funGallon and bacterial growth. They are UL GREENGUARD Gold Certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,
,

K-Flex 801LRE068078 K-Flex Black Long Radius 90 Degree Elbow Cover 7/8" x 3/4" K-Flex K-Fit Black NBR/PVC Cell and Flexible Elastomeric K-Fit fittings are factory-fabricated fittings made from NBR/PVC-based closed cell, flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water-tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, funGallon and bacterial growth. They are UL GREENGUARD Gold Certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,
,

K-Flex 801P068058 K-Flex P-Trap 5/8" x 3/4" K-Fit P-Traps are specially designed to insulate piping systems that are comprised of a tailpiece, curved trap piece and a drain elbow. The factory-made fittings deliver easy installation, a compression fit and reliable performance. K-Fit P-Traps are made from closed cell elastomeric insulation for excellent moisture resistance and thermal properties. All K-Fit P-Traps are fabricated in a factory setting, eliminating the risk of environmental factors affecting the performance of the product.

• Quicker installation (no time wasted fabricated fittings on-site)
• Reduced labor costs
• Uniformity (standardized and manufactured in a controlled environment free of conditional factors that could alter quality)
• Great fit
• Water-tight seams

,
,

K-Flex 801LRE068218 K-Flex Black Long Radius 90 Degree Elbow Cover 2-1/8" x 3/4" K-Flex K-Fit Black NBR/PVC Cell and Flexible Elastomeric K-Fit fittings are factory-fabricated fittings made from NBR/PVC-based closed cell, flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water-tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, funGallon and bacterial growth. They are UL GREENGUARD Gold Certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,
,

K-Flex 801P100078 K-Flex P-Trap 7/8" x 1" K-Fit P-Traps are specially designed to insulate piping systems that are comprised of a tailpiece, curved trap piece and a drain elbow. The factory-made fittings deliver easy installation, a compression fit and reliable performance.

• Uniformity, good fit and watertight seams
• Non-porous, non-fibrous and resist mold growth and are environmentally friendly and CFC free
• Quicker installation
• Great fit
• UV resistant
• Thermal insulation

,
,

Aeroflex is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes
• <7% linear shrinkage dimensional stability
• <0.01 perm" water vapor permeability
  
  

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry